Volcanic and magmatic outgassing mechanisms can determine eruptive behavior of shallow silicic magma bodies. Most outgassing mechanisms proposed take place along conduit margins, where the highest strain rates drive ascending magma to brittle failure. However, these mechanisms do not account for outgassing large volumes of magma away from the conduit walls. Here, we present a continuum of porosity preserved in the microcrystalline rhyolitic Sandfell laccolith, Eastern Iceland. Three stages in the continuum are described: porous flow bands, pore channels, and fracture bands. These deformation features are present throughout the entire exposed volume of the Sandfell laccolith in meter-long band geometries, ranging from mm- to dm-scale thickness, and interlayered with coherent, undeformed rhyolite. Using microstructural analytical methods and drawing on the result of previous experimental studies, we show that emplacement-related deformation induced strain partitioning around a crystal content of 45 % that resulted in the segregation of melt-rich and melt-poorer flow bands. Subsequent deformation induced by continued magma emplacement caused strain partitioning in the melt-rich flow bands. Depending on strain rate, different types of deformation features developed, through dilation or porosity redistribution (porous flow bands), cavitation (pore channels), or tensile fracture (fracture bands). Porous flow bands have permeability values ∼4 orders of magnitude higher than undeformed rhyolite. Pore channels and fracture bands have much larger length scales, and so permeability increases dramatically in those systems. Hence, the abundance and interconnectivity of deformation features preserved in the Sandfell laccolith provided an efficient outgassing mechanism for the bulk of the intrusion. Outgassing due to viscous-brittle magma deformation during magma emplacement should therefore be considered for crystal-rich magmas, e.g., during effusive lava dome extrusion.

How the Earth’s crust accommodates magma emplacement influences the signals that can be detected by monitoring volcano seismicity and surface deformation, which are routinely used to forecast volcanic eruptions. However, we lack direct observational links between deformation caused by magma emplacement and monitoring signals. Here we use field mapping and photogrammetry to quantify deformation caused by the emplacement of at least 2.5 km³ of silicic magma in the Reyðarártindur pluton, Southeast Iceland. Our results show that magma emplacement triggered minor and local roof uplift, and that magma reservoir growth was largely aseismic by piecemeal floor subsidence. The occurrence and arrangement of fractures and faults in the reservoir roof can be explained by magmatic overpressure, suggesting that magma influx was not fully accommodated by floor subsidence. The tensile and shear fracturing would have caused detectable seismicity. Overpressure eventually culminated in eruption, as evidenced by exposed conduits that are associated with pronounced local subsidence of the roof rocks, corresponding to the formation of an asymmetric graben at the volcano surface. Hence, the field observations highlight processes that may take place within silicic volcanoes, not accounted for in widely used models to interpret volcanic unrest.