Tailoring the order in hierarchical structures is a key goal of bioinspired nanocomposite design. Recently, nacre-like materials have been developed by solvent evaporation methods that are scalable and attain advanced functionalities. However, understanding the alignment mechanisms of 2D fillers, nanosheets, or platelets remains challenging. This work explores possible pathways for nanocomposite ordering via orientation distribution functions. We demonstrate how the immobilization of 2D materials via (pseudo)network formation is crucial to alignment based on evaporation. We show a modified affine deformation model that describes such evaporative methods. In this, a gel network develops enough yield stress and uniformly deforms as drying proceeds, along with the immobilized particles, causing an in-plane orientation. Herein, we tested the dominance of this approach by using a thermo-reversible gel for rapid montmorillonite (MMT) particle fixation. We researched gelatin/MMT as a model system to investigate the effects of high loadings, orientational order, and aspect ratio. The nacre-like nanocomposites showed a semiconstant order parameter (⟨P₂⟩ ∼ 0.7) over increasing nanofiller content up to 64 vol % filler. This remarkable alignment resulted in continuously improved mechanical and water vapor barrier properties over unusually large filler fractions. Some variations in stiffness and diffusion properties were observed, possibly correlated to the applied drying conditions of the hybrid hydrogels. The affine deformation strategy holds promise for developing next-generation advanced materials with tailored properties even at (very) high filler loadings. Furthermore, a gelling approach offers the advantages of simplicity and versatility in the formulation of the components, which is useful for large-scale fabrication methods.

Biopolymers are abundant, renewable, and biodegradable resources. However, bio-based materials often require toughening additives, like (co)polymers or small plasticizing molecules. Plasticization is monitored via the glass transition temperature versus diluent content. To describe this, several thermodynamic models exist; nevertheless, most expressions are phenomenological and lead to over-parametrization. They also fail to describe the influence of sample history and the degree of miscibility via structure-property relationships. We propose a new model to deal with semi-compatible systems: the generalized mean model, which can classify diluent segregation or partitioning. When the constant k_GM is below unity, the addition of plasticizers has hardly any effect, and in some cases, even anti-plasticization is observed. On the other hand, when the k_GM is above unity, the system is highly plasticized even for a small addition of the plasticizer compound, which indicates that the plasticizer locally has a higher concentration. To showcase the model, we studied Na-alginate films with increasing sizes of sugar alcohols. Our k_GM analysis showed that blends have properties that depend on specific polymer interactions and morphological size effects. Finally, we also modeled other plasticized (bio)polymer systems from the literature, concluding that they all tend to have a heterogeneous nature.

High-performance bioinspired materials have shown rapid development over the last decade. Examples are brick-and-mortar hierarchical structures, which are often achieved via solvent evaporation. Although good properties are claimed, most systems are composed of stacked or intercalated platelets. Exfoliation is a crucial step to give ultimate anisotropic properties, e.g., thermal, mechanical, and barrier properties. We propose a general framework for all the various types of micro-scale structures that should be distinguished for 2D filler nanocomposites. In particular, the exfoliated state is systematically explored by the immobilization of montmorillonite platelets via (gelatin) hydrogelation. Scattering techniques were used to evaluate this strategy at the level of the particle dispersion and the regularity of spatial arrangement. The gelatin/montmorillonite exfoliated nanostructures are fully controlled by the filler volume fraction since the observed gallery d-spacings perfectly fall onto the predicted values. Surprisingly, X-ray analysis also revealed short- and quasi long-range arrangement of the montmorillonite clay at high loading.

Wastewater solids could be an attractive source of secondary raw cellulose, mainly originating from toilet paper. Cellulose can be recovered through sieving of raw wastewater, return sludge, or excess sludge. In particular, a large fraction of cellulose (13–15%) can be found in the excess sludge of the aerobic granular sludge produced by the Nereda® wastewater technology. A cellulose extraction method was developed during this study, allowing the recovery of a pulp with over 86 wt% purity. The wastewater derived cellulose fibres could be an excellent source for production of recovered cellulose nanocrystals (rCNC). Several pre-treatment steps needed in cellulose nanocrystals (CNC) production from wood pulp are already performed in the production of toilet paper. Here, the technical feasibility of such rCNC is studied. As reference materials, microcrystalline cellulose and toilet paper were also used. The rCNC were obtained by acid hydrolysis, with yields of ∼30 wt% (pulp basis). The wastewater-based material was rod-like, with high aspect ratio (10–14), crystallinity (62–68%), and chemical structure similar to commercial CNC. The yield of rCNC per gram of cellulose recovered from the influent was 22%, while for excess sludge cellulose it was less (4%). Bio-nanocomposites of rCNC and alginate were also investigated. At 50 vol% loading of rCNC, there was a 50% relative increase in stiffness (18 GPa) compared to matrix (12 GPa). The characterization of rCNC and positive impact in composite materials confirms a suitable quality of wastewater derived CNC. Ultimately, the nanocellulose is a tangible example that recovery of high-end products from wastewater is possible, in line with a circular economy.