Wind energy has always been developed as one of the vital parts of modern power systems. However, by integration of wind-based generation, the level of fault current is likely to be increased which can damage the wind generators, microgrid components, and upstream grids. Consequently, utilizing viable protecting structures might preserve wind generator structures and other sections of the electric system as well. In this paper, first, the issue of the fault current of wind generators is discussed, and then well-known solution for protecting wind generators against fault current will be classified based on the comprehensive review. Next, various power electronic-based structures which are proper for protection of systems against the fault current, will be debated and ultimately the features of reviewed structures will be compared and summarized in a table for the case of wind energy generator protection.@en

Utilizing superconducting technology in fault current limiters for power grid applications is a practical solution to achieve a more modern and efficient power system. This is due to their low-loss profile, high efficiency, and ability to transmit about 5x more power in the same footprint compared to conventional counterparts. In addition, the integration of renewable energy resources into power grids makes the use of fast circuit breakers essential. However, the Transient Recovery Voltage (TRV) of fast mechanical circuit breakers stays a concern. This paper studies the TRV of a fast circuit breaker during a fault condition. Then the effect of a solid-state superconducting series reactor (SSSR) on the TRV of the circuit breaker is investigated and compared using an analytical model, simulation studies, and experimental testing. The results prove that an SSSR significantly diminishes the TRV of the fast breaker and offers an effective superconducting solution for modern power grids.@en