This paper concerns the control problem of the active and harmonic power sharing caused by the mismatched impedance in resistive feeders-dominated microgrids. A distributed model predictive control (DMPC) scheme is suggested to regulate the virtual impedance of each involved unit for power sharing based on the neighbor’s state. With the distributed philosophy, the central controller is not required. Moreover, the proposed method benefits resilience to communication failure by designing the communication matrix. Furthermore, it involves propagating information among units in a short period, significantly reducing the communication and computation burden. Finally, the performance of the proposed control scheme is evaluated in terms of its convergence, robustness to communication delay and load variations, resilience to communication failure, and plug-and-play functionality without communication in an inverter-connected system.

This paper concerns the control problem of the active caused by the mismatched impedance in resistive feeders-dominated microgrids. A distributed model predictive control (DMPC) scheme is suggested to regulate the virtual impedance of each involved unit. Moreover, the proposed method benefits resilience to communication failure by designing the communication matrix. Furthermore, it involves propagating information among units in a short period, significantly reducing the communication and computation burden. Finally, the performance of the proposed control scheme is evaluated in terms of its convergence, robustness to communication delay and load variations, resilience to communication failure, and plug-and-play functionality without communication in an inverter-connected system.

This paper proposes a virtual impedance reshaping strategy to share active and harmonic power while promoting the PCC voltage quality. Moreover, the suggested method is resilient to cyber-attacks and immune to communication interruption and delay. Furthermore, it significantly reduces the communication burden. Experiments verify the effectiveness.

Extracting an electric vehicle (EV) charger's input impedance with the analytical model (white-box approach) or the frequency sweep (black-box approach) is limited by the parameter confidentiality or the measurement noise, respectively. To overcome these challenges, a gradient-descent (GD) optimization-based gray-box modeling approach is proposed. To start with, a sensitivity study on the analytical impedance model of an EV charger with a typical controller is carried out to identify the influential frequency range per controller and circuit parameter. On top of that, given an EV charger with unknown control and circuit information, a GD optimization-based algorithm for multiple parameter estimation is designed to identify the unknown controller and circuit parameters based on the measured impedance, by assuming the EV charger is using the typical controller. Then, an analytical input impedance of the black-box EV charger can be obtained. Moreover, the low-accuracy issue commonly encountered when estimating multiple parameters with GD optimization is mitigated with the proposed algorithm. Compared to pure frequency sweep, the proposed approach achieves a higher accuracy for the coupling impedance and a comparable accuracy for the diagonal impedance. The effectiveness of the proposed approach is validated by experimental results.

Due to the mismatched feeder impedances in a resistive feeder AC microgrid, it's challenging to accurately share harmonic and active power while promising a low bus voltage distortion rate. To address this issue, this paper proposes a distributed philosophy-based virtual impedance modulation strategy. The proposed method regulates the fundamental and harmonic impedance at the desired value by exchanging information with its adjacent inverters. Notably, the proposed method benefits from resilience against communication delay, failure, and cyber-attacks. Moreover, it significantly reduces the communication burden. The proposed method's effectiveness is validated through experiments conducted in various cases, including different communication scenarios and plug-and-play operations.

Smart grid steady control relies heavily on the communication infrastructure among sensors, actuators, and control systems, which makes it vulnerable to cyber-attacks. Accurate acquisition of dynamic state information is deemed vital for efficient detection of these cyber-attacks on a smart grid. However, several popular state estimation methods at the present stage are restricted in practical use and require some assumptions. In this paper, we investigate the security of smart grid systems. We (1) identify and define the security problem in the smart grid, (2) compare the performance of several state estimate methods including Least Square, Kalman filter, Extend Kalman filter, in identifying smart grid dynamic information using measurements, and (3) investigate the Chi-square detector, Euclidean Distance, and Cosine similarity matching approaches for attack detection.

Distributed secondary control is deemed necessary to restore the state of AC micro-grids to set points. However, for its limited global information, the power electronic system is vulnerable to cyber-attacks that aim to desynchronize converters or even cause a shutdown of micro-grids by unnecessarily triggering the protection schemes. To this end, an adaptive communication weight update for the secondary control layer is proposed. It guarantees frequency synchronization and active power sharing despite the presence of these attacks. Moreover, it automatically dispatches optimal communication lines when all its neighboring data are corrupted to different levels. Finally, the efficacy of the proposed resilient control method is demonstrated using simulations.

This article presents a small-signal model for power-electronics converters that use a typical control structure in wind energy applications: the double synchronous reference frame current control. The article considers the presence of unbalanced currents and voltages, and analyzes their impact on the frequency couplings of the converter. In addition, it is revealed that, in the presence of negative-sequence voltage synchronization, the converter presents an additional coupling at -2f_1-f_p.