Transportation of a large offshore platform from inland waters to the open sea is a hazardous and challenging mission. With the development of the autonomous surface vessel (ASV), the problem of large floating object transportation has a chance to be solved by applying multiple physical-connected autonomous tugboats. This article proposes a distributed dynamic coordination control scheme for a multivessel autonomous towing system to transport an offshore platform under environmental disturbances. Where the dynamic coordination decision mechanism is based on the relative position of the two neighbor waypoints, the controllers are designed based on the multilayer model-predictive control (MPC) strategy with several specific cost functions, and the distributed control architecture is built based on the alternating direction method of multipliers (ADMM) with augmented Lagrangian function. The simulation experiment indicates that the proposed control scheme can achieve better consensus for the distributed control architecture accomplishment and more efficiently transport an offshore platform under environmental disturbances.

@en

The regulatory endorsement of the International Maritime Organization (IMO) and the support of pivotal shipping market players in recent years motivate the investigation of the potential role that autonomous vessels play in the shipping industry. As the complexity and scale of the envisioned applications increase, research works gradually transform the focus from single-vessel systems to multi-vessel systems. Thus, autonomous multi-vessel systems applied in the shipping industry are becoming a promising research direction. One of the typical research directions is floating object manipulation by multiple tugboats. This paper offers a comprehensive literature review of the existing research on floating object manipulation by autonomous multi-vessel systems. Based on the prior knowledge of object manipulation problems in multi-robot systems, four typical ways of maritime object manipulation are summarized: attaching, caging, pushing, and towing. The advantages and disadvantages of each manipulation way are discussed, including its typical floating object and application scenarios. Moreover, the aspects of control objective, control architecture, collision avoidance operation, disturbances consideration, and role of each involved vessel are analyzed for gaining insight into the approaches for solving these problems. Finally, challenges and future directions are highlighted to give possible inspiration.

@en

Collision avoidance is a priority task for ensuring the safety of a maritime transportation system. However, for a ship towing system, which is characterized by multiple vessels and physical connections, the research works about collision avoidance is limited. Thus, this paper proposes a speed and heading control-based conflict resolution of a ship towing system for collision avoidance. Two systems compose the core of the proposed conflict resolution: the risk assessment system and the coordination control system. The risk assessment is to identify the conflict and determine the time of avoiding action by calculating the index of conflict and the available maneuvering margin. The coordination control is based on the model predictive control (MPC) strategy to cooperatively control two tugboats for regulating the position, heading, and speed of the manipulated ship. Simulation experiments show that according to the index of conflict, the time cost, and the fuel consumption, a selected operation of combined heading and speed can be recommended for a ship towing system to provide a safer and more efficient towage manipulation.

@en

Towing operations are highly reliant on the experience of the towing operators. Safety concerns arise when towing operations are subjected to environmental disturbances and dynamic traffic conditions. However, a systematic framework and approaches to enhance the safety and automation of towing operations remain lacking. This work proposes a framework of collision prevention of ship towing operations under environmental disturbance in near port waters. The focus is to prevent internal collisions between tug and assisted ship and provide early warning of possible collisions with other surrounding ships. A cooperative multi-agent control strategy is employed to specify the direction and magnitude of the towing force of the two tugs in real-time. Therefore, in the presence of environmental disturbance, the assisted ship can sail along the planned trajectory, and the acceptable safe geometric distance between each ship pair in the towing system is guaranteed. Further, a COLREGs-compliant collision alert system is designed to promptly remind the towing operators of a collision hazard with nearby ships, and different alert levels indicate different action obligations of towing operators. This proposed framework and developed methods are applied to a tandem towing system consisting of two tugs and one assisted ship to test its feasibility.

@en

This paper proposes a distributed control scheme for autonomous tugboats to tow a ship in a restricted water traffic environment ensuring collision avoidance while being compliant with maritime regulation called COLREGS. The complex problem is cooperatively solved by addressing three sub-optimization problems. The first is to optimize the towing forces and angles for solving ship waypoint following and collision avoidance problems. The second is to optimize the tug thruster forces and moment for solving the tug online trajectory tracking and collision avoidance problems. The third is to optimize the Lagrange Multipliers for solving the consensus problem between the ship and tugs. The distributed control architecture follows the Model Predictive Control (MPC) strategy using the Altering Direction Method of Multipliers (ADMM). Simulation experiments indicate that the proposed control scheme can deal with static and dynamic obstacles in restricted waterways for a physically interconnected multi-vessel system executing the towing process, and the collision avoidance complies with COLREGS rules.

@en

This thesis provides a set of cooperative control schemes for autonomous multi-vessel systems to manipulate a floating object through physical interconnections in onshore (inland waterways and ports) and offshore areas. Thanks to the maturity and popularity of the advancing technologies in information, communication, sensors, automatic control, and computational intelligence, we have seen the application scenarios of the autonomous vessels being gradually extended from fundamental research to civil and commercial uses. In recent years, to ensure that the regulatory framework for autonomous vessels keeps pace with technological developments, the International Maritime Organization (IMO) has started to include the autonomous vessels issue in its sessions. Maritime operations have become more complex and their scale is getting larger, requiring the involvement of multi-vessel systems. In recent decades, the formation control of multiple vessels has been investigated and several mature control methods are proposed to cope with different typical missions. However, there is a lack of research focusing on floating object manipulation by multiple autonomous vessels through physical interconnections. Thus, the research question of this thesis is How to design a scalable control scheme for multiple ASVs to manipulate a floating object through physical interconnections? Through the analysis of four typical manipulation ways in the maritime field, the towing way is selected in this thesis as the basic physical manipulation model, which has advantages in good maneuverability of the floating object, better safety of the manipulation system, and more flexibility of the operational scenarios. The dynamic model of the towing system is built by using the 3 DOF vectorial representation, where the towing forces and towing angles are the kinetic and kinematic interconnections between the floating object and tugboats, respectively. Considering the multiple control inputs, multiple control constraints, and limited maneuverability of the towing system, the model predictive control (MPC) strategy is the research approach in this thesis. Furthermore, to achieve the distributed control architecture, the alternating direction method of multipliers (ADMM) is used. In this thesis, the proposed method is used in three different operational environments, port areas, inland waterways, and open sea for floating object manipulation...@en

This paper proposes a novel dynamic coordination control scheme for a physically connected multi-vessel towing system to transport an offshore platform. The transportation process is executed by four tugboats, and each of them has a leading or following role. To render the transportation faster, the roles of the tugboats can be switched in the towing process. The dynamic coordination decision mechanism is designed to allocate in real-time a combination of roles to the tugs by comparing the position and heading of the offshore platform to the next waypoint position. A control allocation strategy is developed to optimally control the position and heading of the tugboats considering multiple constraints. The reference trajectory of the tugboats is dynamically calculated based on the assigned role of each tugboat. A simulation experiment indicates that the proposed control scheme can enhance the maneuver-ability of the physically connected multi-vessel towing system and increase the efficiency of offshore platform transportation.

@en

This paper proposes a multi-agent control scheme for multiple physically interconnected tugboats performing a ship towing process. These tugs are coordinated by two control layers. In the higher layer, the supervisory controller outputs the desired towing forces and reference trajectories for the tugs. This information is used by a tug's local controller in the lower layer to calculate the thruster forces and moment for manipulating the ship. The control strategy is based on the model predictive control concept, with the performance function designed by using the position and velocity error to make the ship follow waypoints and speed profile. A distributed control architecture is designed based on the alternating direction method of multipliers (ADMM) to reach a consensus between the predicted position generated by the tug controllers and the reference trajectory generated by the supervisory controller. Simulation experiments illustrate that the proposed method ensures the smooth and efficient maneuverability of the towing process.

@en

Collision avoidance plays a vital role in autonomous vehicle systems. As the complexity and scale of missions increase, multi-vehicle systems are adopted in practice. However, there is limited research on collision avoidance of a physically interconnected multi-vessel system. This paper proposes a control scheme for tugboats to tow a ship in congested port areas ensuring collision avoidance that is compliant with COLREGS. The Model Predictive Control (MPC) strategy is used to optimize the towing angles, towing forces, and tugboats’ thruster forces and moment. The COLREGS rules are integrated into the ship reference system by altering predefined waypoints to guide the towing system in a safe and lawful way. By designing the cost function for the ship and tugboats in the MPC controller system, the proposed control scheme makes the ship-towing system stay away from the obstacles and follow the calculated waypoints, achieving collision avoidance. Simulation experiments indicate that the proposed method can deal with static and dynamic obstacle situations in complex water traffic environments, and the collision avoidance operations comply with the COLREGS rules.@en

This paper investigates the motion-planning problem for an unmanned surface vehicle (USV), in which the goal is to find the shortest search time, the shortest path in navigational waters, all subject to collision avoidance and USV dynamics constraints. A new motion-planning method is proposed, based on topological position relationships (TPR), to achieve this solution. Firstly, the TPR of the obstacles and the USV are constructed, based on the spatial distribution of the obstacles. This gives an overall topological navigation map, which is different from the usual grid-based map. Secondly, a numerical model of unit decomposition is built to constrain the dynamics of the USV, so that the motion of the USV better fits the exact situation. Motion planning in this study is achieved by combining the topological navigation map and a numerical model of the USV. Finally, Numerical simulations and field tests verify the effectiveness of our formulated model and proposed algorithm.@en

This paper investigates the motion-planning problem for an unmanned surface vehicle (USV), in which the goal is to find the shortest search time, the shortest path in navigational waters, all subject to collision avoidance and USV dynamics constraints. A new motion-planning method is proposed, based on topological position relationships (TPR), to achieve this solution. Firstly, the TPR of the obstacles and the USV are constructed, based on the spatial distribution of the obstacles. This gives an overall topological navigation map, which is different from the usual grid-based map. Secondly, a numerical model of unit decomposition is built to constrain the dynamics of the USV, so that the motion of the USV better fits the exact situation. Motion planning in this study is achieved by combining the topological navigation map and a numerical model of the USV. Finally, Numerical simulations and field tests verify the effectiveness of our formulated model and proposed algorithm.@en

This paper investigates the motion-planning problem for an unmanned surface vehicle (USV), in which the goal is to find the shortest search time, the shortest path in navigational waters, all subject to collision avoidance and USV dynamics constraints. A new motion-planning method is proposed, based on topological position relationships (TPR), to achieve this solution. Firstly, the TPR of the obstacles and the USV are constructed, based on the spatial distribution of the obstacles. This gives an overall topological navigation map, which is different from the usual grid-based map. Secondly, a numerical model of unit decomposition is built to constrain the dynamics of the USV, so that the motion of the USV better fits the exact situation. Motion planning in this study is achieved by combining the topological navigation map and a numerical model of the USV. Finally, Numerical simulations and field tests verify the effectiveness of our formulated model and proposed algorithm.@en

A trajectory-cell based method was proposed for unmanned surface vehicle (USV) motion planning to combine the expression of the dynamic constraints and the discretization of the search space. The dynamic constraints were expressed by the USV trajectories produced by the mathematical model. The search space was performed by the discretization rules with the consideration of the path continuity, the search convenience and the maneuvering simplification. Therefore, the trajectory-cells were the discretized trajectories, which made the search space meet the USV dynamic constraints, and guaranteed the final spliced path continuous. After abstracting the characteristics of those cells, the available waypoints and headings were represented as the search indexes. Finally, a trajectory-cell based path searching strategy was proposed by determining the cost function of the A* algorithm. The results showed that the proposed algorithm can plan a practical motion path for the USV.@en

A trajectory-cell based method was proposed for unmanned surface vehicle (USV) motion planning to combine the expression of the dynamic constraints and the discretization of the search space. The dynamic constraints were expressed by the USV trajectories produced by the mathematical model. The search space was performed by the discretization rules with the consideration of the path continuity, the search convenience and the maneuvering simplification. Therefore, the trajectory-cells were the discretized trajectories, which made the search space meet the USV dynamic constraints, and guaranteed the final spliced path continuous. After abstracting the characteristics of those cells, the available waypoints and headings were represented as the search indexes. Finally, a trajectory-cell based path searching strategy was proposed by determining the cost function of the A* algorithm. The results showed that the proposed algorithm can plan a practical motion path for the USV.@en

A trajectory-cell based method was proposed for unmanned surface vehicle (USV) motion planning to combine the expression of the dynamic constraints and the discretization of the search space. The dynamic constraints were expressed by the USV trajectories produced by the mathematical model. The search space was performed by the discretization rules with the consideration of the path continuity, the search convenience and the maneuvering simplification. Therefore, the trajectory-cells were the discretized trajectories, which made the search space meet the USV dynamic constraints, and guaranteed the final spliced path continuous. After abstracting the characteristics of those cells, the available waypoints and headings were represented as the search indexes. Finally, a trajectory-cell based path searching strategy was proposed by determining the cost function of the A* algorithm. The results showed that the proposed algorithm can plan a practical motion path for the USV.@en

Aiming at fine motion control on a small scale area for unmanned surface vehicle (USV), an approach for motion planning based on Trajectory Unit has been proposed. By making use of USV's hydrodynamic model and combining corresponding rules, the method generates a Trajectory Unit set which contains different orbit segments. Through the location and direction that the set of tracks can reach, the route searching in research waters can be done. Finally, a practical motion route will be planned for an USV. The experimental results show that, the planning route can not only avoid obstacles, but also meet the movement characteristics of an USV. And the approach has realized the fine motion control for an USV in a small range of scenarios.@en

Aiming at fine motion control on a small scale area for unmanned surface vehicle (USV), an approach for motion planning based on Trajectory Unit has been proposed. By making use of USV's hydrodynamic model and combining corresponding rules, the method generates a Trajectory Unit set which contains different orbit segments. Through the location and direction that the set of tracks can reach, the route searching in research waters can be done. Finally, a practical motion route will be planned for an USV. The experimental results show that, the planning route can not only avoid obstacles, but also meet the movement characteristics of an USV. And the approach has realized the fine motion control for an USV in a small range of scenarios.@en