Mimicking the locomotive abilities of living organisms on the microscale, where the downsizing of rigid parts and circuitry presents inherent problems, is a complex feat. In nature, many soft-bodied organisms (inchworm, leech) have evolved simple, yet efficient locomotion strategies in which reciprocal actuation cycles synchronize with spatiotemporal modulation of friction between their bodies and environment. We developed microscopic (∼100 μm) hydrogel crawlers that move in aqueous environment through spatiotemporal modulation of the friction between their bodies and the substrate. Thermo-responsive poly-n-isopropyl acrylamide hydrogels loaded with gold nanoparticles shrink locally and reversibly when heated photothermally with laser light. The out-of-equilibrium collapse and reswelling of the hydrogel is responsible for asymmetric changes in the friction between the actuating section of the crawler and the substrate. This friction hysteresis, together with off-centered irradiation, results in directional motion of the crawler. We developed a model that predicts the order of magnitude of the crawler motion (within 50%) and agrees with the observed experimental trends. Crawler trajectories can be controlled enabling applications of the crawler as micromanipulator that can push small cargo along a surface. @en

In an era of globalized trade relations where food and pharmaceutical products cross borders effortlessly, consumers face counterfeit and deteriorated products at elevated rates. This paper presents multifunctional, biodegradable hydrogel microparticles that can provide information on the authenticity and the potential deterioration of the tagged food or pharmaceutical formulations. These microparticles integrate spatially patterned authenticity code with two sensors—the first one detects possible presence of pathogenic microbes through monitoring pH while the second one identifies products stored above optimal temperatures via optical monitoring of the microparticle degradation. Particles are synthesized from a biocompatible polymer and a photoinitiator, dextran modified with 2-hydroxyethylmethacrylate and riboflavin, respectively, using a continuous, high throughput method stop-flow lithography. The proposed synthesis approach also enables crosslinking with visible light bringing about additional flexibility to flow lithography. Model liquid and solid food and pharmaceutical products are successfully labeled with microparticles and the functionality of the sensors in aqueous solutions is demonstrated.@en

Biohydrogels, composed of naturally occurring biopolymers are typically preferred over their synthetic analogues in bioapplications thanks to their biocompatibility, bioactivity, mechanical or degradation properties. Shaping biohydrogels on the single-cell length scales (micrometers) is a key ability needed to create bioequivalent artificial cell/tissue constructs and cannot be achieved with current methods. This work introduces a method for photolithographic synthesis of arbitrarily shaped microgels composed purely of a biopolymer of choice. The biopolymer is mixed with a sacrificial photocrosslinkable polymer, and the mixture is photocrosslinked in a lithographic process, yielding anisotropic microgels with the biopolymer entrapped in the network. Subsequent ionic or covalent biopolymer crosslinking followed by template cleavage yields a microgel composed purely of a biopolymer with the 3D shape dictated by the photocrosslinking process. Method feasibility is demonstrated with two model polysaccharide biopolymers (alginate, chitosan) using suitable crosslinking methods. Next, alginate microgels were used as microtaggants on a pharmaceutical oral solid dose formulation to prevent its counterfeiting. Since the alginate is approved as an additive in the food and pharmaceutical industries, the presented tagging system can be implemented in practical use much easier than systems comprising synthetic polymers. @en