Fire-induced domino effect is one of the main threats to hazardous material storage tanks, and many attempts have been conducted to assess the vulnerability of storage tanks exposed to fire to evaluate domino effect risk. However, past research ignored the influence of wind load on the thermal buckling behavior of storage tanks exposed to fire, which may underestimate the risk of exposed tanks. This paper thus conducts a numerical simulation of the thermal buckling behavior of steel vertical dome storage tanks under the synergistic effect of static wind loads and thermal effects. The effects of wind parameters and heat radiation parameters on the thermal post-buckling behavior and the time to failure (ttf) of storage tanks are investigated to analyze the synergistic effects of fire and wind loads. By comparing the circumferential and meridional stresses before and after the thermal post-buckling stage, it is found that under the disturbing effect of the positive wind pressure load, the thermal post-buckling of the tanks on downwind occurs earlier and more severe. Besides, the effects of wind angle, fire location height, and diameter on buckling damage were investigated. The comparative analysis of different scenarios shows that the tanks in the windy scenario are more prone to thermal post-buckling, and the deformation is intensified, with an increased likelihood of failure.

Fire accidents in oil tank farms can trigger domino effects, leading to multiple tank fires with catastrophic consequences. Preventing losses in large-scale tank farms requires a dynamic assessment of fire-induced domino accidents. Existing research often focuses on calculating the time to failure (TTF) of storage tanks but overlooks the influence of failure modes. This study develops numerical models to explore failure modes of oil storage tanks with uniform and stepwise walls exposed to thermal radiation. Factors such as the flame heights of combustion tank, adjacent spacings, wall thickness, and tank volumes are considered. The numerical model employs a solid double-layer flame model to determine thermal radiation intensity and temperature, followed by a dynamic stress–strain and buckling analysis to obtain time to buckling (TTB) and time to yielding (TTY). If TTB < TTY, the failure model is buckling; otherwise, the failure model is yielding. Results indicate that failure modes in nonuniform thermal fields include buckling and yielding, with stepwise walls favoring buckling and uniform walls favoring yielding. When the wall thickness is below the critical value, failure is yielding; otherwise, it is buckling. These findings support risk management and emergency response for fire-induced domino effects in oil tank farms.