The next frontier for immersive applications is enabling sentience over the Internet. Tactile Internet (TI) envisages transporting skills by providing ultra-low-latency (ULL) communications for transporting touch senses. In this work, we focus our study on the first/last mile communication, where the future generation WiFi-7 is pitched as the front-runner for ULL applications. We discuss a few candidate features of WiFi-7 and highlight its major pitfalls with respect to ULL communication. Further, through a specific implementation of WiFi-7 (vanilla WiFi-7) in our custom simulator, we demonstrate the impact of one of the pitfalls - the standard practice of using jitter buffer in conjunction with frame aggregation - on TI communication. To circumvent this, we propose the Non-Buffered Scheme (NoBuS) - a simple MAC layer enhancement for enabling TI applications over WiFi-7. NoBuS trades off packet loss for latency, enabling swift synchronization between the master and controlled domains. Our findings reveal that employing NoBuS yields a significant improvement in RMSE of TI signals. Further, we show that the worst case WiFi latency with NoBuS is 3.72 ms - an order of magnitude lower than vanilla WiFi-7 even under highly congested network conditions. @en

Tactile Internet promises a widespread adoption of haptic communication over the Internet. However, as haptic technologies are becoming more diversified and available than ever, the need has arisen for a plug-and-play (PnP) haptic communication over a computer network. This paper presents a system for enabling PnP communication of heterogeneous haptic interfaces. The system is based on three key features: (i) a haptic metadata to make haptic interfaces self-descriptive, (ii) a handshake protocol to automatically exchange haptic metadata between two communicating devices, and (iii) a multimodal (haptic-audio-visual) media communication protocol. Implemented using WebRTC, the PnP communication is evaluated using a Tele-Writing application with two heterogeneous haptic interfaces, namely Geomagic Touch and Novint Falcon. Our findings demonstrate the potential of the system to be employed in any Tactile Internet scenario.@en

Recently, the IEEE P1918.1 standardization activity has been initiated for defining a framework for the Tactile Internet. Within this activity, IEEE P1918.1.1 is a task group for the standardization of Haptic Codecs for the Tactile Internet. Primary goal of the task group is to define/develop codecs for both closed-loop (kinesthetic information exchange) and open-loop (tactile information exchange) communications. In this paper, we propose a reference hardware and software setup for the evaluation of kinesthetic codecs. The setup defines a typical teleoperation scenario in a virtual environment for the realization of closed-loop kinesthetic interactions. For the installation and testing of the setup, we provide detailed guidelines in the paper. The paper also provides sample data traces for both static and dynamic kinesthetic interactions. These data traces may be used for preliminary testing of kinesthetic codecs. The paper also provides links for the download of both the reference setup and the data traces.@en

Recently, the IEEE P1918.1 standardization activity has been initiated for defining a framework for the Tactile Internet. Within this activity, IEEE P1918.1.1 is a task group for the standardization of Haptic Codecs for the Tactile Internet. Primary goal of the task group is to define/develop codecs for both closed-loop (kinesthetic information exchange) and open-loop (tactile information exchange) communications. In this paper, we propose a reference hardware and software setup for the evaluation of kinesthetic codecs. The setup defines a typical teleoperation scenario in a virtual environment for the realization of closed-loop kinesthetic interactions. For the installation and testing of the setup, we provide detailed guidelines in the paper. The paper also provides sample data traces for both static and dynamic kinesthetic interactions. These data traces may be used for preliminary testing of kinesthetic codecs. The paper also provides links for the download of both the reference setup and the data traces.@en

Recently, the IEEE P1918.1 standardization activity has been initiated for defining a framework for the Tactile Internet. Within this activity, IEEE P1918.1.1 is a task group for the standardization of Haptic Codecs for the Tactile Internet. Primary goal of the task group is to define/develop codecs for both closed-loop (kinesthetic information exchange) and open-loop (tactile information exchange) communications. In this paper, we propose a reference hardware and software setup for the evaluation of kinesthetic codecs. The setup defines a typical teleoperation scenario in a virtual environment for the realization of closed-loop kinesthetic interactions. For the installation and testing of the setup, we provide detailed guidelines in the paper. The paper also provides sample data traces for both static and dynamic kinesthetic interactions. These data traces may be used for preliminary testing of kinesthetic codecs. The paper also provides links for the download of both the reference setup and the data traces.@en

Recently, the IEEE P1918.1 standardization activity has been initiated for defining a framework for the Tactile Internet. Within this activity, IEEE P1918.1.1 is a task group for the standardization of Haptic Codecs for the Tactile Internet. Primary goal of the task group is to define/develop codecs for both closed-loop (kinesthetic information exchange) and open-loop (tactile information exchange) communications. In this paper, we propose a reference hardware and software setup for the evaluation of kinesthetic codecs. The setup defines a typical teleoperation scenario in a virtual environment for the realization of closed-loop kinesthetic interactions. For the installation and testing of the setup, we provide detailed guidelines in the paper. The paper also provides sample data traces for both static and dynamic kinesthetic interactions. These data traces may be used for preliminary testing of kinesthetic codecs. The paper also provides links for the download of both the reference setup and the data traces.@en

Recently, the IEEE P1918.1 standardization activity has been initiated for defining a framework for the Tactile Internet. Within this activity, IEEE P1918.1.1 is a task group for the standardization of Haptic Codecs for the Tactile Internet. Primary goal of the task group is to define/develop codecs for both closed-loop (kinesthetic information exchange) and open-loop (tactile information exchange) communications. In this paper, we propose a reference hardware and software setup for the evaluation of kinesthetic codecs. The setup defines a typical teleoperation scenario in a virtual environment for the realization of closed-loop kinesthetic interactions. For the installation and testing of the setup, we provide detailed guidelines in the paper. The paper also provides sample data traces for both static and dynamic kinesthetic interactions. These data traces may be used for preliminary testing of kinesthetic codecs. The paper also provides links for the download of both the reference setup and the data traces.@en

Recently, the IEEE P1918.1 standardization activity has been initiated for defining a framework for the Tactile Internet. Within this activity, IEEE P1918.1.1 is a task group for the standardization of Haptic Codecs for the Tactile Internet. Primary goal of the task group is to define/develop codecs for both closed-loop (kinesthetic information exchange) and open-loop (tactile information exchange) communications. In this paper, we propose a reference hardware and software setup for the evaluation of kinesthetic codecs. The setup defines a typical teleoperation scenario in a virtual environment for the realization of closed-loop kinesthetic interactions. For the installation and testing of the setup, we provide detailed guidelines in the paper. The paper also provides sample data traces for both static and dynamic kinesthetic interactions. These data traces may be used for preliminary testing of kinesthetic codecs. The paper also provides links for the download of both the reference setup and the data traces.@en

Recently, the IEEE P1918.1 standardization activity has been initiated for defining a framework for the Tactile Internet. Within this activity, IEEE P1918.1.1 is a task group for the standardization of Haptic Codecs for the Tactile Internet. Primary goal of the task group is to define/develop codecs for both closed-loop (kinesthetic information exchange) and open-loop (tactile information exchange) communications. In this paper, we propose a reference hardware and software setup for the evaluation of kinesthetic codecs. The setup defines a typical teleoperation scenario in a virtual environment for the realization of closed-loop kinesthetic interactions. For the installation and testing of the setup, we provide detailed guidelines in the paper. The paper also provides sample data traces for both static and dynamic kinesthetic interactions. These data traces may be used for preliminary testing of kinesthetic codecs. The paper also provides links for the download of both the reference setup and the data traces.@en