Commercial development of gaseous hydrogen storage in fuel cell electric vehicles is inevitably subjected to reliable and cost-effective design of composite pressure vessels. In this context, certainty in the design process is sought, which is determined by how well the vessel's mechanical response is understood, but more importantly to which accuracy the final collapse can be predicted. As such, a symbiosis of numerical and experimental work appears as a leading path towards robust design methodologies, where both analyses complement and scrutinize each others validity. This research presents the analysis on the mechanical response of composite pressure vessels during internal pressure loading through the correlation of numerical and experimental results on various degrees of complexity. Based on an extensive experimental dataset, a three-dimensional FE model is implemented on a realistic vessel geometry, evaluating its constitutively elastic behavior, and its response under failure and damage progression. Likewise, an established experimental framework is used to derive data by means of contour scans, outer surface strains, airborne acoustic emissions and final burst pressure. The precise recreation of the vessel geometry, together with the detailed analysis approach, permits to show a reasonable agreement between the predicted and the measured structural responses, the sequence of damage onset, and the final collapse occurring in the cylindrical region (<1%). Discrepancies still exist because of the remaining uncertainty concerning the individual layer geometry and the characterization of damage in the helical plies. Altogether, through the alignment of experimental and numerical analyses, this work provides the base for further optimization frameworks, in which an adequate representation of the vessel's meridional thickness profile and material properties stands out as necessary feat to accurately reproduce the mechanical response and final strength in a time- and cost-effective design process.@en

The usage of fibre-reinforced composites in automotive body structures is still a rarity. The main goal in body structure development is to design lightweight structures as cost-efficient as possible. This research contributes to the approach of maximal material usage by considering the strength increase of a carbon-epoxy laminate with increasing strain rate. The objective was to substantiate the well-known material characteristic's strain rate dependency from a coupon level to realistic body structure component – experimentally and numerically. Hence, a special compression fixture was developed to obtain all necessary characteristic values of the investigated T700S DT120 prepreg system. The rectangular coupon specimens were loaded with quasi-static to intermediate strain rates (2×10-4 to 70s-1). A second compression fixture was developed to axial load omega cross-sectional specimens with strain rates from 2×10-4 to 5s-1. The experimental tests showed a significant increase of +23% and +21% in compression strength for rectangular coupon specimens and omega cross-sectional components, respectively. Furthermore, the numerical simulation showed the same increase in strength of +21% for omega cross-sectional components. This work has proven the necessity of considering the strain rate dependency of a composite material to accurately predict the maximum load capacity of a structure during a dynamic load event like a crash.@en

The industrialization of fuel cell electric vehicles demands cost efficient storage solutions for hydrogen. While gaseous storage in type IV pressure vessels is currently the most mature technology, further structure optimization needs to be undertaken in order to meet cost requirements. This research investigates the effects of stacking sequence of composite pressure vessels regarding laminate quality, structural deformation and finally burst pressure. Therefore, a known laminate is studied on a subscale vessel geometry with changing stacking sequences. The specimens are pressurized in a specially designed chamber up to burst pressures of 166.11 MPa. Through a multisensor arrangement of stereometric systems, the deformation is tracked up to burst by using 3D digital image correlation. The experimental results show a difference of 67% in burst pressure between the investigated stacking sequences. Experimental cylinder strains and burst pressures are compared to results derived from 3D elasticity theory with implemented first ply failure criterion. Additionally, using X-ray computed tomography and acid digestion tests, insights about the distribution of fiber volume fraction and porosity are provided. For the investigated sequences in this research, the results show the considerable influence of stacking sequence on the laminate quality, the structural deformation and finally the burst pressure of composite pressure vessels. Moreover, it is shown that while the used 3D elasticity approach proved to be a useful tool for the prediction of strains and failure in the cylindrical section, discrepancies between prediction and experiment can arise based on preliminary failure occuring at the cylinder-dome transition. The results therefore emphasize the need for analytical and numerical analysis strategies to consider transition-related effects between cylinder and dome.@en

This study deals with a newly developed fixture to obtain strain rate-dependent properties of carbon fiber reinforced plastics (CFRP) under flexural loading. While the quasi-static method is mostly state of the art and covered in standards, the dynamic testing of CFRP is very demanding in terms of testing procedure, test rig and occurring failure mechanisms . @en