The rapid increase in the number of PV installations in current low voltage (LV) distribution networks brings many technical operational challenges. This claims for the deployment of control strategies to deal with these concerns, especially those related to overvoltage issues. Based on this, this paper presents a comprehensive assessment of the performance of PV inverters operating with droop control for overvoltage mitigation using a stochastic methodology based on a Monte Carlo approach. The uncertainty related to the PV generation and the users’ consumption behavior is fully considered through advanced statistical modeling techniques. Voltage magnitude and loading indexes are used as key metrics to assess the technical performance of the distribution network, simulated using OpenDSS, under two droop-based control strategies: Active Power Control (APC) and coordinated Reactive and Active Power Control (RPC-APC). The effects of curtailed energy on the PV users’ revenue is also analyzed. A case of study based on real smart meter data from The Netherlands is used. According to the obtained results, both control strategies are effective to mitigate voltage violations. Nevertheless, for the case of 100% PV penetration, the droop-based coordinated RPC-APC allowed an 18% more of exported energy than the droop-based APC control strategy.@en

This paper introduces an adaptive sequential droop control strategy for PV inverters to mitigate voltage rise problems in PV-rich LV distribution networks. To facilitate the effective coordination of sequential (Q−V and P−V) droop control of PV inverters, multiple control areas with the strong coupling nature of PV systems are identified based on the ε-decomposition technique. The droop control parameters are tuned and adapted, based on a consensus among PV inverters within each control area. This proposed control strategy inherits the autonomous feature of the droop control for coping with voltage rise issues while being able to avoid curtailing a significant amount of PV production. To evaluate the effectiveness of the proposed control strategy, simulations using MATLAB/Simulink are performed on a real European LV distribution network, considering a PV penetration level of about 150%. The obtained results highlight that the proposed control strategy successfully mitigates voltage rise problems while significantly reducing the amount of curtailed PV generation by approximately 35.6% and 76.2% when compared with the static sequential droop control and the static Q−V droop control and adaptive P−V droop control, respectively. Simultaneously, the effective contribution among all the PV systems towards voltage rise mitigation is obtained.@en

The proliferation of PV generation systems connected to electrical distribution systems (EDSs) brings many operational challenges, and within them, over-voltage issues are regarded as the most critical. Among all the strategies available to handle these over-voltage issues, those implemented locally at the PV inverters seem to be the more promising, considering their distributed and easy-to-implement features. In this paper, the feasibility and performance assessment of a commercial PV inverter for mitigating over-voltage events in an EDS is presented. To do this, an active and reactive droop-based voltage control strategy is implemented in a commercial inverter. Realtime power hardware-in-the-loop (PHIL) laboratory tests were performed to assess the PV inverter's efficiency when absorbing reactive power, as well as its interaction with the distribution grid. According to the obtained results, the PV inverter's efficiency was not noticeably affected by the changes in reactive power. Additionally, the PV inverter responded accordingly, following the voltage control strategy implemented, providing successfully the expected voltage support services.@en