Finite Element (FE) modeling often requires unavoidable simplifications or assumptions due to a lack of experimental data, modeling complexity, or non-affordable computational cost. One such simplification is modeling corrosion phenomena or material properties, which are usually assumed to be uniform throughout the structure. However, e.g., corrosion has a local nature and severe consequences on the behavior of steel structures that should not be overlooked. To improve the current numerical modeling techniques in aging steel bridges, this paper proposes a Gaussian Copula-based Bayesian Network (GCBN) approach to model the spatial variability of structural element properties. Accordingly, a study of the automatic Bayesian network generation process is first conducted. Subsequently, the methodology is applied to a severely damaged riveted steel bridge built in 1897. The results show that the methodology has excellent flexibility for generating properties variability in FE models at a low computational cost, thus ensuring its practical feasibility and robustness for accurate numerical modeling.@en

In present work it is pretended to estimate elastic parameters of beams through the combined use of precision geomatic techniques (laser scanning) and structural behaviour simulation tools. The study has two aims, on the one hand, to develop an algorithm able to interpret automatically point clouds acquired by laser scanning systems of beams subjected to different load situations on experimental tests; and on the other hand, to minimize differences between deformation values given by simulation tools and those measured by laser scanning. In this way we will proceed to identify elastic parameters and boundary conditions of structural element so that surface stresses can be estimated more easily.@en