Connecting large dc distribution grids on the same voltage level can allow superior utilization of infrastructure. Selective ground fault protection is necessary and can be done using low impedance grounding. Distributed energy resources would allow for higher resilience of the grid if islanding operation of dc microgrids is allowed. For safety, grounding is essential in these islanded microgrids so individual grounding points are needed. Multiple low impedance grounding points would cause dc ground currents that lead to corrosion. This paper introduces capacitive grounding which is high impedance in steady-state effectively eliminating ground currents but is low impedance for fault transients and thus can allow for selective ground fault protection. The sensitivity of the capacitor sizing for two grounding points is shown. Further an initial filter for ground fault discrimination is analyzed.