Soft robotic systems pose a significant challenge for traditional modeling, estimation, and control approaches, primarily owing to their inherent complexity and virtually infinite degrees of freedom (DoFs). This work introduces an innovative method for dynamically estimating the states of tendon-actuated soft manipulators. Our technique merges the Geometric Variable-Strain (GVS) approach with a kinematic formula that links the length variation of tendons to the deformations of the manipulator and a nonlinear observer design based on state-dependent Riccati equation (SDRE). In our methodology, the soft links are represented by Cosserat rods, and the robot's geometry is parameterized by the strain field along its length. Consequently, its infinite dimensions can be described by utilizing multiple degrees of freedom, depending on the required precision. This enables us to estimate the states (pose and velocity) of tendon-actuated soft manipulators solely based on tendon displacements and actuator forces. Through simulation, we demonstrate the convergence of our estimation method across various DoFs and actuator numbers, revealing a trade-off between the number of DoFs and required actuators for observing system states. Furthermore, we validate our approach with an experimental prototype of 25 cm in length, achieving an average tip position error during dynamic motion of 1.79 cm-less than 7% of the overall body length.

While soft robots offer advantages in adaptability and safe interaction, their modeling remains challenging. This paper presents a novel, data-driven approach for model order reduction of slender soft robots using autoencoder-parameterized strain within the Geometric Variable Strain (GVS) framework. We employ autoencoders (AEs) to learn low-dimensional strain parameterizations from data to construct reduced-order models (ROMs), preserving the Lagrangian structure of the system while significantly reducing the degrees of freedom. Our comparative analysis demonstrates that AE-based ROMs consistently outperform proper orthogonal decomposition (POD) approaches, achieving lower errors for equivalent degrees of freedom across multiple test cases. Additionally, we demonstrate that our proposed approach achieves computational speed-ups over the high-order models (HOMs) in all cases, and outperforms the POD-based ROM in scenarios where accuracy is matched. We highlight the intrinsic dimensionality discovery capabilities of autoencoders, revealing that HOM often operate in lower-dimensional nonlinear manifolds. Through both simulation and experimental validation on a cable-actuated soft manipulator, we demonstrate the effectiveness of our approach, achieving near-identical behavior with just a single degree of freedom. This structure-preserving method offers significant reductions in the system degrees of freedom and computational effort while maintaining physical model interpretability, offering a promising direction for soft robot modeling and control.