Objective. Geometrical region of interest (ROI) selection in electrical impedance tomography (EIT) monitoring may lack sensitivity to subtle changes in ventilation distribution. Therefore, we demonstrate a new physiological method for ROI definition. This is relevant when using ROIs to compute subsequent EIT-parameters, such as the ventral-to-dorsal ratio during a positive end-expiratory pressure (PEEP) trial.Approach.Our physiological approach divides an EIT image to ensure exactly 50% tidal impedance variation in the ventral and dorsal region. To demonstrate the effects of our new method, EIT measurements during a decremental PEEP trial in 49 mechanically ventilated ICU-patients were used. We compared the center of ventilation (CoV), a robust parameter for changes in ventro-dorsal ventilation distribution, to our physiological ROI selection method and different commonly used ROI selection methods. Moreover, we determined the impact of different ROI selection methods on the PEEP level corresponding to a ventral-to-dorsal ratio closest to 1.Main results.The division line separating the ventral and dorsal ROI was closer to the CoV for our new physiological method for ROI selection compared to geometrical ROI definition. Moreover, the PEEP level corresponding to a ventral-to-dorsal ratio of 1 is strongly influenced by the chosen ROI selection method, which could have a profound clinical impact; the within-subject range of PEEP level was 6.2 cmH2O depending on the chosen ROI selection method.Significance.Our novel physiological method for ROI definition is sensitive to subtle ventilation-induced changes in regional impedance (i.e. due to (de)recruitment) during mechanical ventilation, similar to the CoV.

Objective. Electrical impedance tomography (EIT) produces clinical useful visualization of the distribution of ventilation inside the lungs. The accuracy of EIT-derived parameters can be compromised by the cardiovascular signal. Removal of these artefacts is challenging due to spectral overlapping of the ventilatory and cardiovascular signal components and their time-varying frequencies. We designed and evaluated advanced filtering techniques and hypothesized that these would outperform traditional low-pass filters. Approach. Three filter techniques were developed and compared against traditional low-pass filtering: multiple digital notch filtering (MDN), empirical mode decomposition (EMD) and the maximal overlap discrete wavelet transform (MODWT). The performance of the filtering techniques was evaluated (1) in the time domain (2) in the frequency domain (3) by visual inspection. We evaluated the performance using simulated contaminated EIT data and data from 15 adult and neonatal intensive care unit patients. Main result. Each filter technique exhibited varying degrees of effectiveness and limitations. Quality measures in the time domain showed the best performance for MDN filtering. The signal to noise ratio was best for DLP, but at the cost of a high relative and removal error. MDN outbalanced the performance resulting in a good SNR with a low relative and removal error. MDN, EMD and MODWT performed similar in the frequency domain and were successful in removing the high frequency components of the data. Significance. Advanced filtering techniques have benefits compared to traditional filters but are not always better. MDN filtering outperformed EMD and MODWT regarding quality measures in the time domain. This study emphasizes the need for careful consideration when choosing a filtering approach, depending on the dataset and the clinical/research question.

Background: Prolonged weaning from mechanical ventilation is associated with poor clinical outcome. Therefore, choosing the right moment for weaning and extubation is essential. Electrical Impedance Tomography (EIT) is a promising innovative lung monitoring technique, but its role in supporting weaning decisions is yet uncertain. We aimed to evaluate physiological trends during a T-piece spontaneous breathing trail (SBT) as measured with EIT and the relation between EIT parameters and SBT success or failure. Methods: This is an observational study in which twenty-four adult patients receiving mechanical ventilation performed an SBT. EIT monitoring was performed around the SBT. Multiple EIT parameters including the end-expiratory lung impedance (EELI), delta Tidal Impedance (ΔZ), Global Inhomogeneity index (GI), Rapid Shallow Breathing Index (RSBI_EIT), Respiratory Rate (RR_EIT) and Minute Ventilation (MV_EIT) were computed on a breath-by-breath basis from stable tidal breathing periods. Results: EELI values dropped after the start of the SBT (p < 0.001) and did not recover to baseline after restarting mechanical ventilation. The ΔZ dropped (p < 0.001) but restored to baseline within seconds after restarting mechanical ventilation. Five patients failed the SBT, the GI (p = 0.01) and transcutaneous CO₂ (p < 0.001) values significantly increased during the SBT in patients who failed the SBT compared to patients with a successful SBT. Conclusion: EIT has the potential to assess changes in ventilation distribution and quantify the inhomogeneity of the lungs during the SBT. High lung inhomogeneity was found during SBT failure. Insight into physiological trends for the individual patient can be obtained with EIT during weaning from mechanical ventilation, but its role in predicting weaning failure requires further study.