Thermochemical Water-Splitting (TCWS) is a promising approach for generating clean hydrogen (H₂) by employing the waste heat originating from different sources. High-temperature requirements and temperature swing approach hinder the widespread adoption of TCWS for clean hydrogen production. This study explores ceria nanorods (CeNRs) as a potential solution for overcoming these limitations. Herein, we report, the TCWS in a fixed bed reactor using CeNRs at low and constant temperature of 400 °C. We systematically explore the influence of synthesis parameters on the resulting CeNRs, including the selection of ceria precursor, effect of calcination, and their impact in TCWS. It was found that CeNRs prepared using cerium chloride as the precursor exhibited enhanced TCWS activity, resulting significantly higher total H₂ yield 4.74 mL/g, at a constant temperature of 400 °C in three redox cycles. Moreover, X-ray Photoelectron Spectroscopy (XPS) analysis confirms the presence of both Ce³⁺ and Ce⁴⁺ states within the structure, with Ce³⁺ constituting approximately 30 % and Ce⁴⁺ accounting for approximately 70 % of the total cerium content. Additionally, Raman spectroscopy corroborates the presence of a higher concentration of oxygen vacancy which are beneficial for increasing the hydrogen production. We demonstrate that ceria in its nanorod structure having exposed higher proportions of (110) and (100) planes and higher concentration of oxygen vacancies is beneficial for lowering TCWS temperature as well as increasing the hydrogen yield.

The interest in and need for carbon-free fuels that do not rely on fossil fuels are constantly growing from both environmental and energetic perspectives. Green hydrogen production is at the core of the transition away from conventional fuels. Along with popularly investigated pathways for hydrogen production, thermochemical water splitting using redox materials is an interesting option for utilizing thermal energy, as this approach makes use of temperature looping over the material to produce hydrogen from water. Herein, two-step thermochemical water splitting processes are discussed and the key aspects are analyzed using the most relevant information present in the literature. Redox materials and their compositions, which have been proven to be efficient for this reaction, are reported. Attention is focused on non-volatile redox oxides, as the quenching step required for volatile redox materials is unnecessary. Reactors that could be used to conduct the reduction and oxidation reaction are discussed. The most promising materials are compared to each other using a multi-criteria analysis, providing a direction for future research. As evident, ferrite supported on yttrium-stabilized zirconia, ceria doped with zirconia or samarium and ferrite doped with nickel as the core and an yttrium (III) oxide shell are promising choices. Isothermal cycling and lowering of the reduction temperature are outlined as future directions towards increasing hydrogen yields and improving the cyclability.

Climate change, the greenhouse effect and fossil fuel extraction have gained a growing interest in research and industrial circles to provide alternative chemicals and fuel synthesis technologies. Carbon dioxide (CO₂) hydrogenation to value-added chemicals using hydrogen (H₂) from renewable power (solar, wind) offers a unique solution. From this aspect this review describes the various products, namely methane (C₁), methanol, ethanol, dimethyl ether (DME) and hydrocarbons (HC_s) originating via CO₂ hydrogenation reaction. In addition, conventional reactor units for the CO₂ hydrogenation process are explained, as well as different types of microreactors with key pathways to determine catalyst activity and selectivity of the value-added chemicals. Finally, limitations between conventional units and microreactors and future directions for CO₂ hydrogenation are detailed and discussed. The benefits of such set-ups in providing platforms that could be utilized in the future for major scale-up and industrial operation are also emphasized.

The need to replace fossil fuels with sustainable alternatives has been a critical issue in recent years. Hydrogen fuel is a promising alternative to fossil fuels because of its wide availability and high energy density. For the very first time, novel microreactor configurations for the formic acid decomposition have been studied using computational modeling methodologies. The decomposition of formic acid using a commercial 5 wt % Pd/C catalyst, under mild conditions, has been assessed in packed bed, coated wall, and membrane microreactors. Computational fluid dynamics (CFD) was utilized to develop the comprehensive heterogeneous microreactor models. The CFD modeling study begins with the development of a packed bed microreactor to validate the experimental work, subsequently followed by the theoretical development of novel microreactor configurations to perform further studies. Previous work using CFD modeling had predicted that the deactivation of the Pd/C catalyst was due to the production of the poisoning species CO during the reaction. The novel membrane microreactor facilitates the continuous removal of CO during the reaction, therefore prolonging the lifetime of the catalyst and enhancing the formic acid conversion by approximately 40% when compared to the other microreactor configurations. For all microreactors studied, the formic acid conversion increases as the temperature increases, and the liquid flow rate decreases. Further studies revealed that all microreactor configurations had negligible internal and external pore diffusion resistances. The detailed models developed in this work have provided an interesting insight into the intensification of the formic acid decomposition reaction over a Pd/C catalyst.