Wind turbine controllers are nowadays ever more advanced and rely on accurate internal controller model information. Therefore a calibrated model is needed for attaining predictable controller performance and ensuring stable operation. To calibrate the internal model information, a novel learning control scheme has recently been proposed that exploits the dynamics of the closed-loop controlled wind turbine system, without the need for wind speed measurements. The learning algorithm thereby periodically excites the generator power controller input signal. An extremum-seeking demodulation scheme was used to calibrate the internal model information. This paper improves the existing learning scheme in two ways: Firstly, it investigates how the frequency of the excitation signal influences the signal-to-noise ratio. Secondly, the problem was reformulated as a root-finding problem. This requires using the in-phase component of the phase-corrected learning signal. In addition, a precalculated lookup table relates the measured in-phase component directly to model uncertainty. It was found that an increased excitation frequency improves the signal-to-noise ratio (SNR) by an order of magnitude. Combined, these contributions improve the convergence speed more than twenty times, addressing the effect of aerodynamic degradation and its consequences on controller performance.

Modern industrial wind turbine controllers for partial-load region control are becoming increasingly complex by progressively relying on modeled aerodynamic characteristics. These advanced turbine controllers generally consist of a combined wind speed estimator and tracking controller, allowing for a granular trade-off between energy capture maximization and (fatigue) load minimization. Because of the limited measurements available to the controller, the control scheme's internal model quality is of utmost importance in satisfying performance and stability requirements. Therefore, the calibration thereof is of particular interest. To date, little work has been performed on the direct calibration of the model information. This work proposes a data-driven iterative learning algorithm for calibrating the internal physical model parameters. The learning algorithm uses generally available closed-loop turbine measurements, complemented with an external measurement of the rotor effective wind speed (REWS), and is thereby largely nondisruptive. The algorithm is based on steady-state assumptions and performs iterative batch-wise updates of the internal control model toward convergence. As the algorithm corrects at the actual turbine operating point, short-term relocations of the turbine's operating point can be used to calibrate in a broader operational domain. Results show outstanding learning capabilities for an aerodynamically degraded wind turbine under realistic turbulent wind conditions. Moreover, a sensitivity study is performed to expose the algorithm's susceptibility to measurement errors, algorithm tuning, and the size of the data set.