High Lift Split Flaps for the Flying-V
S. Eftekhar (TU Delft - Aerospace Engineering)
R. Vos – Mentor (TU Delft - Flight Performance and Propulsion)
F. Oliviero – Graduation committee member (TU Delft - Flight Performance and Propulsion)
O Stroosma – Graduation committee member (TU Delft - Control & Simulation)
S. Asaro – Graduation committee member (TU Delft - Flight Performance and Propulsion)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
The Flying-V, a novel aircraft design developed at Delft University of Technology, presents a revolutionary flying wing transport aircraft with a remarkable 20% reduction in energy consumption compared to traditional twin-aisle planes.
This thesis project delves into the study of optimizing the Flying-V's landing performance, emphasizing the necessity of reducing pitch attitude. High-lift devices, particularly split flaps, were explored for this purpose. Wind tunnel tests were carried out on a scaled-down model of the half- wing, in the Open Jet Facility of TU Delft. The tests yielded two successful flap configurations— a single-flap and a double-flap.
These were analyzed further using a flight performance tool to make a final selection on the flap configuration. The single-flap option proved effective in reducing landing pitch attitude by 3 degrees, significantly lowering obscured segment by 20 to 30 m and the pilot's eye altitude by 1 m. This is a quite desirable outcome for the landing performance of the Flying-V which significantly improves pilot’s vision.