Optimal Multivariable Control for Wide Output Regulation and Full-Range Efficiency Optimization in LCC-LCC Compensated Wireless Power Transfer Systems
G. Zhu (TU Delft - DC systems, Energy conversion & Storage)
J. Dong (TU Delft - DC systems, Energy conversion & Storage)
G. Yu (TU Delft - DC systems, Energy conversion & Storage)
W. Shi (TU Delft - DC systems, Energy conversion & Storage)
C. Riekerk (TU Delft - DC systems, Energy conversion & Storage)
Pavol Bauer (TU Delft - DC systems, Energy conversion & Storage)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This article presents an optimal multivariable control (OMC) strategy for the LCC-LCC compensated wireless power transfer systems. To mitigate reactive power and achieve higher efficiency, the proposed OMC method incorporates dual-side hybrid modulation and primary-side switch-controlled-capacitor (SCC) tuning into the triple-phase-shift (TPS) control. First, the impact of hybrid modulation and SCC tuning on the system characteristics is investigated. The inverter and rectifier zero-voltage-switching (ZVS) conditions are then analyzed to achieve dual-side ZVS with minimal reactive power. Furthermore, a multivariable optimization problem is established based on the power loss analysis. The solution to this problem provides optimal control variables that minimize the overall system loss. Through collaborative modulation and control of the inverter, rectifier, and SCC, the proposed method reduces the rms values of the currents and lowers the turn-off currents for the converters. As a result, this approach improves efficiency in both light- and heavy-load conditions, enabling wide output regulation and full-range efficiency optimization simultaneously. Finally, the proposed method is benchmarked with the existing TPS method. Experimental results demonstrate that the proposed method achieves higher dc-to-dc efficiency in the power range of 0.2-2.2 kW, with a maximum efficiency improvement of up to 6.3%.