Wave Loads on Emerged Breakwater Crown Walls, a Physical Model Study
M.I.C. Veringa (TU Delft - Civil Engineering & Geosciences)
B. Hofland – Mentor (TU Delft - Hydraulic Structures and Flood Risk)
Marcel R. A. Van Gent – Graduation committee member (TU Delft - Coastal Engineering)
Alessandro Antonini – Graduation committee member (TU Delft - Coastal Engineering)
D.C.P. van Kester – Mentor (TU Delft - Coastal Engineering)
Greg Smith – Coach
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
In this study loading characteristics of rubble mound breakwater crown walls are investigated. This is done using a 2D physical model, testing for overall stability (through sliding) and temporal & spatial distributions of pressure along the face and base of the crown wall. A variety of wave conditions and geometries is used, with special attention for the influence of foundation level on the loading characteristics. This study shows the importance of this parameter and its link to the time lag between the maximum horizontal force and maximum vertical force in a wave impact. Using a new analysis method based on the factor of safety, this time lag is quantified and a reduction factor for the vertical forces is introduced.