Wall pressure fluctuations over a serrated trailing edge at different angles of attack
Lourenço Tércio Lima Lima Pereira (TU Delft - Wind Energy)
Francesco Avallone (TU Delft - Wind Energy)
D Ragni (TU Delft - Wind Energy)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
iew Video Presentation: https://doi-org.tudelft.idm.oclc.org/10.2514/6.2021-2179.vid
The unsteady surface pressure fluctuations over trailing-edge serrations retrofitted to the benchmark NACA 633-018 profile are experimentally measured. Miniaturized unsteady pressure transducers installed on the serration surface are used to describe the temporal and spatial distribution of the wall pressure fluctuations over the trailing-edge add-on. The measured spectra, convection velocity, and correlation lengths of the surface pressure fluctuations are presented for the most upstream sensor and compared against the data at different locations along the serration surface. Different angles of attack are tested in a Reynolds number of 2,000,000 (based on the airfoil chord) in order to describe the properties of the wall pressure fluctuations at a range of representative conditions for wind turbine applications. The study details the characteristics of the wall-pressure fluctuations on the serration surface. In particular, the distribution of the wall-pressure fluctuations with and without aerodynamic loading caused by the variation of the airfoil angle of attack is shown, highlighting the impact of the vortex pairs formed around the edges of the serrations under loading on the wall-pressure fluctuations. The experimental results focus on the modifications of the wall-pressure fluctuations over the serration surface. Results show that, at small angles of attack, the amplitude of the wall-pressure fluctuations is higher at the serration root for low frequencies and at the serration tip for high frequencies. As the angle of attack increases, the aerodynamic loading over the serrations causes an increase in the wall pressure fluctuations around the edges of the serrations. This increase depends on the incoming fluctuations from the boundary layer and is related to the degradation of serration acoustic performance at angle. Furthermore, the experimental results corroborate to the benchmark activities for trailing-edge serration noise carried out in collaboration with DTU and DLR, providing information about the pressure fluctuations measured near the edges of the serration.