Fabrication and Characterization of a Leaky Lens Photo-Conductive Antenna on Low Temperature Grown GaAs Membranes

More Info
expand_more

Abstract

State-of-the-art THz pulsed commercial systems operating over large bandwidth suffer from high dispersion or low radiation efficiency due to the poor coupling between the transmitter and receiver photoconductive antennas (PCAs). In this work, we present the fabrication and characterization of a leaky-lens PCA that has the potential to solve this problem. The presented PCA is based on a low-temperature grown gallium arsenide (LT-GaAs) membrane with a 1:15 bandwidth coverage (0.1-1.5 THz), where the frequency response is constant. In order to fabricate the PCA on an LT-GaAs membrane, a novel fabrication process is developed. This process is dramatically faster than previously used processes (∼1.5 h instead of ∼20 h). Furthermore, an experimental validation of the radiated power together with the comparison to a standard bow-tie-based PCA fabricated on the same LT-GaAs wafer is shown in this article. We show that the PCA source on the LT-GaAs membrane is more efficient due to the enhanced leaky wave radiation. The leaky-lens PCA stands out as a great candidate to improve the coupling efficiency in THz pulsed commercial systems, where the maximum laser power that can be used is limited by the dispersion in the optic fiber.