Multiscale 3D-printing of microfluidic AFM cantilevers
Robert C.L.N. Kramer (TU Delft - Micro and Nano Engineering)
E. J. Verlinden (TU Delft - Micro and Nano Engineering)
Livia Angeloni (TU Delft - Micro and Nano Engineering)
Anita Van Den Heuvel (Leiden University Medical Center)
Lidy Elena Fratila-Apachitei (TU Delft - Biomaterials & Tissue Biomechanics)
Silvère M. van der Maarel (Leiden University Medical Center)
Murali Krishna Ghatkesar (TU Delft - Micro and Nano Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Microfluidic atomic force microscopy (AFM) cantilever probes have all the functionalities of a standard AFM cantilever along with fluid pipetting. They have a channel inside the cantilever and an aperture at the tip. Such probes are useful for precise fluid manipulation at a desired location, for example near or inside cells. They are typically made by complex microfabrication process steps, resulting in expensive probes. Here, we used two different 3D additive manufacturing techniques, stereolithography and two-photon polymerization, to directly print ready-to-use microfluidic AFM cantilever probes. This approach has considerably reduced the fabrication time and increased the design freedom. One of the probes, 564 μm long, 30 μm wide, 30 μm high, with a 25 μm diameter channel and 2.5 μm wall thickness had a spring constant of 3.7 N m-1 and the polymer fabrication material had an elastic modulus of 4.2 GPa. Using these 3D printed probes, AFM imaging of a surface, puncturing of the cell membrane, and aspiration at the single cell level have been demonstrated.
help_outline