Analysis and Design of a Multi-Core Oscillator for Ultra-Low Phase Noise

More Info
expand_more
Publication Year
2016
Language
English
Copyright
© 2016 S.A.R. Ahmadi Mehr, M. Tohidian, R.B. Staszewski
Research Group
Electronics
Issue number
4
Volume number
63
Pages (from-to)
529-539
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

In this paper, we exploit an idea of coupling multiple oscillators to reduce phase noise (PN) to beyond the limit of what has been practically achievable so far in a bulk CMOS technology. We then apply it to demonstrate for the first time an RF oscillator that meets the most stringent PN requirements of cellular basestation receivers while abiding by the process technology reliability rules. The oscillator is realized in digital 65-nm CMOS as a dualcore LC-tank oscillator based on a high-swing class-C topology. It is tunable within 4.07-4.91 GHz, while drawing 39-59 mA from a 2.15 V power supply. The measured PN is -146.7 dBc/Hz and -163.1 dBc/Hz at 3 MHz and 20 MHz offset, respectively, from a 4.07 GHz carrier, which makes it the lowest reported normalized PN of an integrated CMOS oscillator. Straightforward expressions for PN and interconnect resistance between the cores are derived and verified against circuit simulations and measurements. Analysis and simulations show that the interconnect resistance is not critical even with a 1% mismatch between the cores. This approach can be extended to a higher number of cores and achieve an arbitrary reduction in PN at the cost of the power and area.

Files

10610609.pdf
(pdf | 2.69 Mb)
License info not available