Framework for Numerical Simulation of Crossflow Development and Transition to Turbulence on Swept Wings
F.R.A. Adam (TU Delft - Aerospace Engineering)
Stefan Hickel – Mentor (TU Delft - Aerodynamics)
Marios Marios – Mentor (TU Delft - Aerodynamics)
J. Casacuberta Puig – Mentor (TU Delft - Aerodynamics)
Alberto F. Rius Vidales – Mentor (TU Delft - Aerodynamics)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Maintaining laminar flow on large swept surfaces of subsonic transport aircraft, i.e. the wings and the stabilisers, is currently posing a considerable challenge for aerodynamic design. Improving the efficiency of aircraft by delaying or removing the laminar-to-turbulent transition process over the wing and tail parts can substantially reduce contaminant emissions. The dominant flow instability causing laminar-turbulent transition of swept-wing flow is the so-called crossflow instability (CFI). Ongoing research at TU Delft has shown potential to delay transition by use of passive mechanisms. As such, a framework has been designed to numerically compute crossflow development and transition to turbulence on swept wings. Through the use of experimental data acquired in wind-tunnel measurements at TU Delft, the CFI development and transition process on swept wings has been modelled numerically by means of Direct Numerical Simulation (DNS). Based on a DNS laminar flow field generated from the pressure distribution along the model surface, a numerical primary CFI mode in good agreement with the experiment was obtained through Non-linear Parabolized Stability Equations (NPSE). Following this steady flow field analysis, the simulation was made unsteady by the implementation of numerical free-stream turbulence. This novel method resulted in unprecedented modelling of the receptivity mechanisms of transition in three-dimensional crossflow cases, overcoming ad-hoc treatments. Both experimental and numerical flow fields indicated a Type-I dominant secondary CFI (i.e. K-H type of response in the laterally inclined shear layer of the stationary crossflow vortex), which consequently carries the formation of near-wall hairpins and ultimately turbulence. Crossflow vortex frequency content also agrees well in the low-frequency band (450Hz ≤ 𝑓 ≤ 3000Hz), whilst the numerical high-frequency content (3500Hz ≤ 𝑓 ≤ 9000𝐻𝑧) does show a distinct delay in amplitude growth throughout the majority of the transition region. Contradicting the promising qualitative analysis of the free-stream turbulence methodology, this discrepancy in the frequency spectrum indicates the major shortcoming in the numerical setup, which was shown to be biased towards introducing more low-frequency disturbances at the inflow boundary.