Chessboard FPA in 130-nm SiGe BiCMOS for High-Resolution Passive Terahertz Imaging

Journal Article (2026)
Author(s)

Martijn Hoogelander (TU Delft - Tera-Hertz Sensing)

Marco Spirito (TU Delft - Electronics)

Batuhan Sutbas (IHP - Leibniz Institute for High Performance Microelectronics)

Corrado Carta (IHP - Leibniz Institute for High Performance Microelectronics)

Nuria Llombart (TU Delft - Tera-Hertz Sensing)

Maria Alonso-delPino (TU Delft - Tera-Hertz Sensing)

Research Group
Tera-Hertz Sensing
DOI related publication
https://doi.org/10.1109/JMW.2026.3660185 Final published version
More Info
expand_more
Publication Year
2026
Language
English
Research Group
Tera-Hertz Sensing
Journal title
IEEE Journal of Microwaves
Issue number
2
Volume number
6
Pages (from-to)
334-349
Downloads counter
36
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

This work presents a chessboard focal plane array (FPA) camera with state-of-the-art thermal and spatial resolution in the 200 600 GHz frequency range. The FPA is implemented in a 130-nm SiGe BiCMOS technology, where each antenna element is loaded with a direct detector based on heterojunction bipolar transistors (HBTs). The antenna and detector architecture, including the vias and biasing network, were optimized to achieve a noise-equivalent power (NEP) suitable for passive THz imaging. Overall, the estimated loss of the FPA is better than 4 dB between 350 and 600 GHz, of which 1.5 dB is due to ohmic losses in the FPA, 1 dB to mutual coupling between detectors, and 0.7 dB to the impedance mismatch between the detector and antenna. A prototype of 24 pixels was manufactured and mounted on the base of a silicon hyperhemispherical lens with an anti-reflection coating. Excellent spatial resolution is achieved through a tight element spacing in the fabricated FPA, which is only half the wavelength in silicon at 350 GHz and therefore consistent with the state-of-the-art. Its responsivity, noise, and radiation patterns were characterized using a quasi-optical measurement setup. The measured radiation patterns are within 1 dB of simulations, demonstrating that the integrated THz camera achieves excellent spatial resolution. Between 330 GHz and 500 GHz, the NEP was measured to be on the order of 10 pW/vHz. When considering the entire operational band, this NEP results in a noise-equivalent temperature difference (NETD) of the camera is 1.6 K for an integration time of 1 s per pixel, which is comparable to the state-of-the-art. While THz detectors with state-of-the-art sensitivity are limited to single-pixel designs, the presented work combines a multi-pixel implementation with competitive sensitivity.