Impact of bioreactor process parameters and yeast biomass on Raman spectra

Abstract

In-line Raman spectroscopy combined with chemometric modeling is a valuable process analytical technology (PAT) providing real-time quantitative information on cell culture compounds. Considering that compound quantification through chemometric models depends on pre-processing to maintain consistent changes in intensity at certain wavenumbers, all causes of signal distortion should be well understood to prevent quantification inaccuracies. This work investigated spectral distortion caused by the changing bioreactor parameters temperature, bubble quantity, and medium viscosity. In addition, the isolated spectral contribution of Saccharomyces cerevisiae cells in suspension was also determined. A temperature range from 20 to 40°C resulted in peak shifts up to 0.8 cm⁻¹ to lower wavenumbers, bubbles generated under standard bioreactor operation conditions led to signal attenuation of up to 7.93% reduction in peak intensity, and changes in liquid viscosity resulted in complex peak shift behavior. Isolated biomass concentrations reaching 5 g/L caused up to 44.6% reduction in distinct peak intensity, which was similar to spectra from batch process fermentations. Correcting for the attenuation revealed spectral features of biomass associated with proteins and lipids in the 1000–1500 cm⁻¹ region. However, the spectral contribution of yeast biomass is dominated by signal extinction, which attenuates Raman spectra in a non-linear manner as biomass accumulates. The obtained knowledge on different sources of spectral distortion aids in the development of robust pre-processing and modeling strategies to obtain chemometric models applicable across experimental setups.