About two-phase flow distribution improvement in the header of a simplified evaporator
A multi-factorial study with the help of a Design of Experiment technique
Aude Lecardonnel (TU Delft - Flight Performance and Propulsion, von Karman Institute for Fluid Dynamics)
Chiara Falsetti (TU Delft - Fluid Mechanics)
Claretta Tempesti (von Karman Institute for Fluid Dynamics)
D. Laboureur (von Karman Institute for Fluid Dynamics)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This study experimentally investigates the combined impact of several parameters on the two-phase flow distribution in an evaporator header for an air/water mixture, in flow pattern similarity with a low Global Warming Potential refrigerant. The test were performed at isothermal conditions under the assumption that phase change is negligible in an evaporator header. The water and air flow rates were varied and three inlet qualities were targeted (x=0.04,0.1and0.25). Total mass fluxes G ranging from 42 kg/(sm2) to 513 kg/(sm2) were covered. The impact of the fluid properties on the flow patterns was preliminary and theoretically evaluated by means of flow maps for all pipe directions: horizontal, vertical upward and vertical downward. A rectangular header connected to eight parallel channels of internal diameter (I.D.) of 10 mm was used to mimic an evaporator. Four header and channels orientations were investigated. The inlet position and the diameter of the feeding tube (23 mm or 56 mm) could be changed as well as the channels intrusion inside the header height. A flow pattern breaking device, also called splashing grid, was also tested at the inlet of the header. A Design Of Experiment (DOE) technique was used to build an optimized test matrix ensuring that the impact of each parameter individually as well as their combinations could be assessed in a balanced manner and within a minimum amount of tests. Forty-eight tests were needed. The standard deviation of the water flow distribution among the channels is set as comparative variable. Based on the experimental results, a ranking of the most influential parameters was established. The study highlights that the orientation of the header and channels is the most significant parameter impacting the flow distribution, followed the tube inlet position. The combined influence of the inlet tube position and diameter, the tube intrusion and the presence/absence of the splashing grid is evaluated for each of the four orientations. Based on these conclusions, design rules were established for each header and channel orientation. The findings of this research represent a significant advancement in the field and can serve as a foundation for greatly improving flow distribution within evaporators, thereby enhancing their thermal performance.