Effects of free surface modelling and wave-breaking turbulence on depth-resolved modelling of sediment transport in the swash zone
J. W.M. Kranenborg (University of Twente)
Geert H.P. Campmans (University of Twente)
Jebbe J. van der Werf (University of Twente, Deltares)
R. McCall (Deltares)
A.J.H.M. Reniers (TU Delft - Environmental Fluid Mechanics)
Suzanne J.M.H. Hulscher (University of Twente)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
The swash zone is an important region for the coastal morphodynamics. Often, model studies of the swash zone use depth-averaged models. These models typically assume a vertically uniform velocity and sand concentration for calculating the sand transport flux. However, this assumption is not always accurate in the swash zone. In order to investigate the vertical distribution of velocity and sand, we use a depth-resolving model that is able to capture these vertical variations. We simulate the flow and suspended sediment transport induced by bichromatic waves using a 2DV depth-resolving RANS model. Our verification of the model shows that special care needs to be taken to deal with bubbles in 2DV simulations. Furthermore, we show that turning off the (Wilcox, 2006, 2008) limiter for turbulence, increases the modelled turbulent kinetic energy that is induced by wave-breaking, resulting in improved predictions of sediment concentrations. Using the depth-resolving model, we show that the vertical distribution of velocity and sand is far from uniform in the swash zone. The results show that if one assumes vertically uniform depth-averaged velocities and concentrations, one can overpredict the sediment flux by 50%.
help_outline