Long-term experimental testing of phase change materials as cooling devices for photovoltaic modules

Journal Article (2024)
Authors

Juan Camilo Ortiz Ortiz Lizcano (TU Delft - Photovoltaic Materials and Devices)

H. Ziar (TU Delft - Photovoltaic Materials and Devices)

C.K. de Mooij (TU Delft - Photovoltaic Materials and Devices)

M.P.F. Verheijen (TU Delft - Photovoltaic Materials and Devices)

Chris van Nierop Sanchez (Student TU Delft)

Davide Ferlito (Enel)

Carmelo Connelli (Enel)

Andrea Canino (Enel)

Miro Zeman (TU Delft - Photovoltaic Materials and Devices)

O Isabella (TU Delft - Photovoltaic Materials and Devices)

Research Group
Photovoltaic Materials and Devices
To reference this document use:
https://doi.org/10.1016/j.solmat.2024.113133
More Info
expand_more
Publication Year
2024
Language
English
Research Group
Photovoltaic Materials and Devices
Bibliographical Note
Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public. @en
Volume number
277
DOI:
https://doi.org/10.1016/j.solmat.2024.113133
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

This work is a long-term, interannual, and experimental study conducted in multiple locations. It studies the effects of phase change materials (PCMs) on photovoltaic modules’ performance by reducing their operational temperature. Two PV modules were manufactured so that PCM slabs could be mechanically attached to their backside, ensuring contact with the related photovoltaic active area. Experiments were conducted in Delft, Netherlands, from 2019 until 2021 and in Catania, Italy, during the winter and start of spring of 2023. The experiment also considered two installation layouts: building integrated (Delft) and standard rack-mounted (Catania). The measurements showed that the PCM provides significant cooling under both locations, with a temperature reduction of up to 15 °C. In Delft, thermal control could be obtained for most of the sunny hours of the day, even during the summer months. In Catania, the module with PCM presented, on occasion, higher temperatures than its standard counterpart, primarily due to winter-time environmental conditions. However, the PCM provided sufficient thermal control on all conditions, ensuring increased energy yield. This increase ranged from 2.1 to 2.5 % in Delft and 1.3–1.6 % in Italy.

Files

1-s2.0-S0927024824004458-main.... (pdf)
(pdf | 15.7 Mb)
- Embargo expired in 10-02-2025
License info not available