Design and evaluation of a series-elastic gyroscopic actuator for balance assistance

Conference paper (2021)

Authors

C.D. Marquardt Karlsruhe Institut für Technologie
D.S. Lemus Perez Biomechatronics & Human-Machine Control - Mechanical, Maritime and Materials Engineering , Erasmus MC
C. Meijneke EMSD EEMCS Project engineers1
H. Vallery Biomechatronics & Human-Machine Control - Mechanical, Maritime and Materials Engineering , Erasmus MC
Research Group
Biomechatronics & Human-Machine Control (Mechanical, Maritime and Materials Engineering) (TU Delft)
CMG SEA Wearable robotics Control moment gyroscope Series-elastic actuator Torque control
More Info
expand_more

Published Date

2021

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical, Maritime and Materials Engineering

Department

Biomechanical Engineering

Research Group

Biomechatronics & Human-Machine Control

Abstract

Sensory-motor impairments due to age or neurological diseases can influence a person's ability to maintain balance, and increase the risk of falls. Recently, wearable Control Moment Gyroscopes (CMGs) have proven to provide effective balance support. Here, we show a new design of a Series-Elastic Control Moment Gyroscope (SECMG) enhanced by an additional passive degree of freedom, namely a second, orthogonal gimbal that is supported by a (visco)elastic element. The design mainly aims to reject disturbances originating from human movement and render a low remaining impedance, as well as to provide more accurate torque sensing, based on angular deflection of the compliant element. Evaluation of the torque tracking performance with regards to a classic rigid Single-Gimbal Control Moment Gyroscope (SGCMG) showed that the device equally exceeds the bandwidth requirements for its application in human augmentation. However, characterization of our current compliant construction also revealed some backlash occluding the torque-deflection relation. In the future, the SECMG could be evaluated in experiments with humans, to validate its predicted low remaining impedance.