Prototype Wing Design and Manufacturing for Reflexed Airfoil Morphing †
Panagiotis Georgopoulos (TU Delft - Aerospace Engineering)
Jurij Sodja (TU Delft - Aerospace Engineering)
Roeland De Breuker (TU Delft - Aerospace Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This paper presents the development of a novel morphing wing prototype with three camber-twist morphing flaps. Reflexed airfoil morphing is achieved by means of two chordwise degrees-of-freedom, thereby decoupling lift from the aerodynamic moment with respect to the aerodynamic centre. The prototype wing design is characterised by a novel morphing flap concept and driven by the boundary conditions pertinent to the wind tunnel testing facilities and the choice of research questions. The flaps’ spanwise ends are adapted to represent a seamless and a discontinuous transition between adjacent flaps. Linear electric motors induce the morphing shapes, equipped with load cells on their respective push rods, for actuator force measurement. Pressure taps are included to measure the pressure distribution along the wing section. Upon manufacturing, preliminary static test results validate the wing’s morphing functionality. The morphing trailing edge demonstrates a range of camber morphing and twist morphing shapes, as well as the ability to support asymmetric morphing between adjacent flaps.
help_outline