Modelling Ultrafast Photoacoustic Signal Formation in an Aluminium-Coated Silicon Structure
A physics-based framework for acoustic generation, propagation, and optical detection
T. Lautenbag (TU Delft - Mechanical Engineering)
G.J. Verbiest – Mentor (TU Delft - Mechanical Engineering)
R.H. Guis – Mentor (TU Delft - Mechanical Engineering)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Ultrafast photoacoustic metrology offers a potential route for detecting alignment structures buried beneath optically opaque layers in semiconductor wafers. Interpreting the measured transient reflectivity is challenging, however, because the signal results from the coupled processes of optical absorption, electron–phonon energy transfer, thermoelastic generation, acoustic propagation, interface interactions, and optical detection. This thesis develops a physics-based framework for analysing these processes in an aluminium-coated silicon structure.
The measured response is decomposed in the frequency domain as Y(ω) = D(ω)H(ω)S(ω), where S(ω) represents thermoelastic source formation, H(ω) the structural and acoustic response, and D(ω) the optical detection sensitivity. Analytical models are combined with experimental transient-reflectivity measurements and a COMSOL Multiphysics model. A semi-infinite thermal-diffusion model is used to describe the slow thermal background and infer the Al–Si thermal interface conductance. The model reproduces the ideal-interface limit of the numerical simulation, while fits to two experimental datasets yield conductances of approximately 177 and 195 MW m⁻² K⁻¹, with a mean of 185.9 MW m⁻² K⁻¹.
The framework is subsequently applied to investigate prominent spectral components observed near 40 and 120 GHz. The high-frequency response cannot be explained by the aluminium-film eigenfrequencies alone. The optical absorption depth produces substantial source content near 110 GHz, while finite electron–phonon equilibration reduces and shifts this content. The Al–Si interface further modifies the resonance frequencies and amplitudes through its frequency-dependent reflection phase and magnitude. Optical detection introduces additional frequency-dependent weighting through the spatial overlap between the strain field and the probe sensitivity.
The combined model qualitatively reproduces the principal spectral features. An effective frequency-dependent attenuation law fitted to successive measured echoes is included in the analytical and COMSOL models, giving good agreement with the observed echo decay. This agreement supports the implementation, while independent validation of the attenuation law remains future work.
The results show that increasing acoustic frequency and maximizing detectable echo amplitude are competing design objectives. Effective system design must therefore jointly consider optical absorption, electron–phonon coupling, structural resonance, interface transmission, propagation losses, and optical sensitivity.
Files
File under embargo until 30-09-2028