The effect of boron concentration on the electrical, morphological and optical properties of boron-doped nanocrystalline diamond sheets
Tuning the diamond-on-graphene vertical junction
Michał Rycewicz (Gdansk University of Technology, TU Delft - Micro and Nano Engineering)
Adrian Nosek (University of California)
D. Shin (TU Delft - QN/Steeneken Lab, Kavli institute of nanoscience Delft)
Mateusz Ficek (Gdansk University of Technology)
JG Buijnsters (TU Delft - Micro and Nano Engineering)
Robert Bogdanowicz (Politechnika Gdanska)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
In this paper, the effect of boron doping on the electrical, morphological and structural properties of free-standing nanocrystalline diamond sheets (thickness ~ 1 μm) was investigated. For this purpose, we used diamond films delaminated from a mirror-polished tantalum substrate following a microwave plasma-assisted chemical vapor deposition process, each grown with a different [B]/[C] ratio (up to 20,000 ppm) in the gas phase. The developed boron-doped diamond (BDD) films are a promising semiconducting material for sensing and high-power electronic devices due to band gap engineering and thermal management feasibility. The increased boron concentration in the gas phase induces a decrease in the average grain size, consequently resulting in lower surface roughness. The BDD sheets grown with [B]/[C] of 20,000 ppm reveal the metallic conductivity while the lower doped samples show p-type semiconductor character. The charge transport at room temperature is dominated by the thermally activated nearest-neighbor hopping between boron acceptors through impurity band conduction. At low temperatures (<300 K), the Arrhenius plot shows a non-linear temperature dependence of the logarithmic conductance pointing towards a crossover towards variable range hopping. The activation energy at high temperatures obtained for lowly-doped sheets is smaller than for nanocrystalline diamond bonded to silicon, while for highly-doped material it is similar. Developed sheets were utilized to fabricate two types of diamond-on-graphene heterojunctions, where boron doping is the key factor for tuning the shape of the current-voltage characteristics. The graphene heterojunction with the low boron concentration diamond sheet resembles a Schottky junction behavior, while an almost Ohmic contact response is recorded with the highly doped BDD sheet of metallic conductivity. The free-standing diamond sheets allow for integration with temperature-sensitive interfaces (i.e. 2D materials or polymers) and pave the way towards flexible electronics devices.
help_outline