- document
-
Lan, Xiaoyi (author), Wardenier, J. (author), Packer, Jeffrey A. (author)Within the research framework for updating the international design standard ISO 14346 for hollow section joints, this study examines brace failure and chord sidewall failure in full-width rectangular hollow section (RHS) X and T joints under brace axial tension, brace in-plane bending and brace out-of-plane bending. The codified design rules...journal article 2022
- document
-
Kim, Seon Hu (author), Lee, Cheol Ho (author), Han, Sang Hui (author), Wardenier, J. (author)In this study, existing deformation limits are first re-examined to investigate if they can be rationally extended to high strength steel circular hollow section (CHS) joints that are subjected to in-plane bending (IPB) moment. It is pointed out that existing deformation limits, which have been developed and validated primarily for mild steel...journal article 2022
- document
-
Lan, Xiaoyi (author), Wardenier, J. (author), Packer, Jeffrey A. (author)It is well known that the current design rules adopted by international design codes such as ISO 14346 and design guides, e.g., the CIDECT design guide No. 3, for chord sidewall failure in mild steel rectangular hollow section (RHS) joints under brace axial compression are considerably conservative, if the RHS joints are adequately supported...journal article 2021
- document
-
Wardenier, J. (author), de Vries, P.A. (author), Timmerman, Gerrit (author)This paper deals with the evaluation of fatigue cracks under a concentrated compression (wheel) load in an I-section with full penetration welds between the web and flange. The objective is to investigate whether cracks stop or nearly stop when they have grown through the residual tensile stress field. These experimental investigations are...journal article 2018
- document
-
Wardenier, J. (author), Packer, Jeffrey (author), Puthli, Ram (author)This paper deals with revised, simplified, consistent equations for plate-to-Circular Hollow Section (CHS) joints for inclusion in codes. After a short review of the background to these resistance equations in the current consolidated version of EN 1993-1-8 and those in ISO 14346, the background to these simplified new equations is discussed....journal article 2018
- document
-
Wardenier, J. (author), de Vries, P.A. (author), Timmerman, Gerrit (author)This paper is part of an evaluation of fatigue cracks in a crane runway girder with full penetration welds between the web and flange. The fatigue analysis of this actual crane runway girder is described in [1]. The investigation described in this paper deals with additional experimental tests on equivalent welded I sections on scale of...journal article 2017
- document
- Wardenier, J. (author), van der Vegte, G.J. (author), Liu, D.K. (author) report 2007
- document
- Liu, D.K. (author), Wardenier, J. (author) report 2005
- document
- Borger, A.J. (author), Romeijn, A. (author), Wardenier, J. (author) report 2004
- document
- van der Vegte, G.J. (author), Liu, D.K. (author), Makino, Y. (author), Wardenier, J. (author) report 2003
- document
- Liu, D.K. (author), Wardenier, J. (author), Chiew, S.P. (author) report 2003
- document
- Romeijn, A. (author), Wardenier, J. (author) report 2003
- document
- Liu, D.K. (author), Wardenier, J. (author) report 2002
- document
- Liu, D.K (author), Wardenier, J. (author) report 2002
- document
- Zhang, L. (author), Wardenier, J. (author), Eekhout, M. (author) report 2001
- document
- Liu, D.K. (author), Wardenier, J. (author) report 2001
- document
- Liu, D.K. (author), Wardenier, J. (author) report 2000
- document
- Liu, D.K. (author), Wardenier, J. (author) report 1999
- document
- Reusink, J.H. (author), Aantjes, A. (author), Bosman, P.G.F. (author), Wardenier, J. (author) report 1999
- document
- van Wingerde, A. (author), Wardenier, J. (author), Packer, J.A. (author) report 1998