Strategy to mitigate the dipole interfacial states in (i)a-Si:H/MoO_x passivating contacts solar cells

Molybdenum oxide (MoO_x) is attractive for applications as hole-selective contact in silicon heterojunction solar cells for its transparency and relatively high work function. However, the integration of MoO_x stacked on intrinsic amorphous silicon (i)a-Si:H layer usually exhibits some issues that are still not fully...

Strategy to mitigate the dipole interfacial states in (i)a-Si:H/MoOxpassivating contacts solar cells

Electrical simulations show that the dipole formed at (i)a-Si:H/MoOx interface can explain electrical performance degradation. We experimentally manipulate this interface by a plasma treatment (PT) to mitigate the dipole strength without harming the optical response. The optimal PT + MoOx stack results in strongly improved electrical...

Doped hydrogenated nanocrystalline silicon oxide layers for high-efficiency c-Si heterojunction solar cells

Hydrogenated nanocrystalline silicon oxide (nc-SiO_x:H) layers exhibit promising optoelectrical properties for carrier-selective-contacts in silicon heterojunction (SHJ) solar cells. However, achieving high conductivity while preserving crystalline silicon (c-Si) passivation quality is technologically challenging for growing thin...

Front and rear contact Si solar cells combining high and low thermal budget Si passivating contacts

In this work we develop a rear emitter silicon solar cell integrating carrier-selective passivating contacts (CSPCs) with different thermal budget in the same device. The solar cell consists of a B-doped poly-Si/SiO_x hole collector and an i/n hydrogenated amorphous silicon (a-Si:H) stack acting as electron collector placed on the...

Numerical Simulations of IBC Solar Cells Based on Poly-Si Carrier-Selective Passivating Contacts

This paper presents an analysis of physical mechanisms related to operation and optimization of interdigitated back contact (IBC) poly-silicon-based devices. Concepts of carrier selectivity and tunneling are used to identify the parameters that impact on the fill factor. Then, based on technology computer-aided design (TCAD) numerical...

High temperature oxidation pre-treatment of textured c-Si wafers passivated by a-Si:H

This work shows an alternative surface cleaning method for c-Si wafers to replace the standard chemical procedures as RCA or HNO ₃ which involve hazardous chemicals or unstable processes. The method consists in a high-temperature oxidation treatment (HTO) performed in a classical tube furnace that incorporates organic and metal...

High-Mobility Hydrogenated Fluorine-Doped Indium Oxide Film for Passivating Contacts c-Si Solar Cells

Broadband transparent conductive oxide layers with high electron mobility (μ_e) are essential to further enhance crystalline silicon (c-Si) solar cell performances. Although metallic cation-doped In₂O₃ thin films with high μ_e (>60 cm² V^-1 s^-1) have been extensively...

Poly-crystalline silicon-oxide films as carrier-selective passivating contacts for c-Si solar cells

The poly-Si carrier-selective passivating contacts (CSPCs) parasitically absorb a substantial amount of light, especially in the form of free carrier absorption. To minimize these losses, we developed CSPCs based on oxygen-alloyed poly-Si (poly-SiO_x) and deployed them in c-Si solar cells. Transmission electron microscopy analysis...

Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells

In this work we present a theoretical analysis of charge carriers transport mechanisms in IBC-SHJ solar cells. The concepts of contact and transport selectivity are correlated through the band bending at c-Si interface and are used to identify thin-film silicon parameters affecting fill factor (FF) and open-circuit voltage (V_OC)....

High-efficiency black IBC c-Si solar cells with poly-Si as carrier-selective passivating contacts

In this work, we present the application of poly-Si carrier-selective passivating contacts (CSPCs) as both polarities in interdigitated back-contacted (IBC) solar cell architectures. We compared two approaches to form a gap between the back-surface field (BSF) and emitter fingers. It is proved that the gaps prepared by both approaches are...

Poly-Si(O)x passivating contacts for high-efficiency c-Si IBC solar cells

Highest conversion efficiency in crystalline silicon (c-Si) solar cells can be enabled by quenching minority carriers' recombination at c-Si/contact interface owing to carrier-selective passivating contacts. With the semi-insulating poly-crystalline silicon (SIPOS, poly-Si) a very good passivation of c-Si surfaces was obtained. We have...

IBC c-Si solar cells based on ion-implanted poly-silicon passivating contacts

Ion-implanted poly-crystalline silicon (poly-Si), in combination with a tunnel oxide layer, is investigated as a carrier-selective passivating contact in c-Si solar cells based on an interdigitated back contact (IBC) architecture. The optimized poly-Si passivating contacts enable low interface recombination, resulting in implied VOC (iVOC) of...

Design and application of ion-implanted polySi passivating contacts for interdigitated back contact c-Si solar cells

Ion-implanted passivating contacts based on poly-crystalline silicon (polySi) are enabled by tunneling oxide, optimized, and used to fabricate interdigitated back contact (IBC) solar cells. Both n-type (phosphorous doped) and p-type (boron doped) passivating contacts are fabricated by ion-implantation of intrinsic polySi layers deposited via low...