A 5GS/s 360MHz-BW 68dB-DR Continuous-Time 1-1-1 Filtering MASH ΔΣ ADC in 40nm CMOS

In the pursuit of ever larger bandwidths, in recent years GHz-rate continuous-time (CT) oversampled ADCs have been reported in literature that achieve bandwidths of hundreds of MHz and have even exceeded the GHz barrier [1]-[3]. As impressive as these bandwidths are for CT ADCs, the required ADC architectures are complex, are sensitive to...

Simulation and Verification or Cu@Ag Core-shell Sintered Paste for Power Semiconductor Die-attach Applications

With the increasing application of wide bandgap materials such as silicon carbide and gallium nitride in power devices, the working temperature of power devices has been pushed further. Therefore, it brings higher requirements for packaging materials. Sintered silver is a widely accepted chip connection material. However, silver suffers from...

Mechanical and chloride permeability properties of coarse fibre reinforced concrete

Synthetic fibers have been widely studied as reinforcing materials to increase the mechanical and durability properties of concrete. According to its diameter, fibers can be categorized as micro and macro (or coarse) fibers. As most research focuses on the mechanical properties of fiber reinforced concrete, its chloride permeability properties...

Effect of bio-oil on low-intermediate temperature properties of organosolv lignin-bitumen

Lignin, one of the most abundant natural polymers, has been extensively studied as liquid or solid additive in bituminous binders. Despite the fact the organosolv lignin in bitumen improves the overall resistance against oxidative aging, lignin could lead to binders of high thermal cracking sensitivity. In this study, a bio-based oil is...

End-to-end language diarization for bilingual code-switching speech

We propose two end-to-end neural configurations for language diarization on bilingual code-switching speech. The first, a BLSTM-E2E architecture, includes a set of stacked bidirectional LSTMs to compute embeddings and incorporates the deep clustering loss to enforce grouping of languages belonging to the same class. The second, an XSA-E2E...

Fabrication of Nanoslits with <111> Etching TSWE Method

In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by &lt;111&gt; crystal plane etching. The etching rate of the &lt;111&gt; crystal plane is reasonably slow as it is only 1/45 of the &lt;100&gt; etching rate, thus allowing and...

Microwave heating simulation of asphalt pavements

Microwave heating is a promising heating technology for the maintenance, recycling and deicing of pavement structures. Many experimental studies have been conducted to investigate the microwave heating properties of asphalt mixtures in the laboratory. However, very few studies investigated the application of microwave heating on asphalt...

Oxidation simulation of thin bitumen film

Oxidative aging is a complex phenomenon in bitumen and its fundamental understanding is needed to optimize paving materials with long-lasting characteristics. This research reports on a diffuse-reaction model for predicting the oxidation of bituminous binders over time and under different conditions. As known, the oxidation of bitumen is...

Preliminary study on using lignin as aging inhibitor in bitumen

During oxidative aging, oxygen reacts with active molecules present in bitumen producing polar compounds, principally ketones and sulfoxides, and increasing in the portion of asphaltenes. In general, oxidation reactions in bitumen yields to change its generic chemical composition and finally its colloidal structure deteriorating the physico...

Dissolution simulation of polymers in bitumen

Fundamental models should be developed and utilized in order to facilitate the chemo-mechanical design of modified binder systems for paving applications but not only. Especially, the fact that the incorporation of new chemical substances used as bio-based modifiers or alternative binders is attracting great interest to replace traditional...

Wafer Scale Flexible Interconnect Transfer for Hetrogeneous Integration

A polymer-based wafer level integration technology suitable for miniaturized and multi-functional systems integration was developed and demonstrated in this work. Wafer scale flexible interconnects were firstly fabricated on one wafer, and then transferred to another wafer. Such transfer process involved wafer bonding and application of...

Chemical and Oxidative Controlled Hardening of Epoxy-Modified Bitumen

The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...

Relaxing the control-gain assumptions of DSC design for nonlinear MIMO systems

This work focuses on adaptive neural dynamic surface control (DSC) for an extended class of nonlinear MIMO strict-feedback systems whose control gain functions are continuous and possibly unbounded. The method is based on introducing a compact set which is eventually proved to be an invariant set: thanks to this set, the restrictive...

The application model of 3D cadastre in practical registration for real estate in China

Since the introduction of the concept of 3D cadastre, a great many of significant research results have been done. To promote the development of 3D cadatre, 3D cadastre working group sponsored by International Federation Surveyors (FIG) commissions 3 and 7 was organized by Delft University of Technology in 2001. This working group provides a...

Investigation on the DC CB Performance during a Current Interruption Failure at First Current Zero

The vacuum interrupter is used as the key component of an active DCCB due to its excellent interruption and dielectric recovery characteristics after current zero. The vacuum interrupter can only interrupt the fault currents below the limitation of a critical di/dt and TIV, otherwise it causes a reignition and the interruption failure. In...

Scale of Fluctuation for Geotechnical Probabilistic Analysis

In the past few years, random field theory has been increasingly used to model the inherent soil variability. The scale of fluctuation is one of the important parameters describing a stationary random field. In this study, the factors affecting an accurate estimation of the scale of fluctuation were studied with numerical experiments to show how...

Preferential concentration of particles in compressible turbulence

The behavior of particles in compressible turbulence has been seldom investigated to date despite its importance in many natural and industrial flows. Direct numerical simulations of particle-laden compressible isotropic turbulence are performed to study the preferential concentration of particles and the underling mechanisms. It turns out that...

Metagenomic insights into the bio-functionality of 21 anaerobic biogas reactors (abstract)