Characteristics of fly ash blended mortars under ammonium chloride solution leaching

Characteristics of fly ash(FA) blended mortars (50%, 70% and 90%) at different curing ages (28 days and 180 days) under ammonium chloride solution(ACS) leaching were investigated. Mass loss under leaching, initial CaO content, Ca(OH)2 content(CH), content of chemical bonded water, and hydration degree of blended pastes were tested by XRF and DSC...

Fabrication of Nanoslits with <111> Etching TSWE Method

In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by &lt;111&gt; crystal plane etching. The etching rate of the &lt;111&gt; crystal plane is reasonably slow as it is only 1/45 of the &lt;100&gt; etching rate, thus allowing and...

Wafer Scale Flexible Interconnect Transfer for Hetrogeneous Integration

A polymer-based wafer level integration technology suitable for miniaturized and multi-functional systems integration was developed and demonstrated in this work. Wafer scale flexible interconnects were firstly fabricated on one wafer, and then transferred to another wafer. Such transfer process involved wafer bonding and application of...

The internal and external flow fields of a structured porous coated cylinder and implications on flow-induced noise

Porous coated cylinders have been shown to reduce the vortex shedding tone and broadband noise of a bare cylinder placed in uniform flow within specific Reynolds number regimes. The processes by which the vortex shedding and thus tone suppression take place are still uncertain despite numerous numerical and experimental studies. It is understood...

The application model of 3D cadastre in practical registration for real estate in China

Since the introduction of the concept of 3D cadastre, a great many of significant research results have been done. To promote the development of 3D cadatre, 3D cadastre working group sponsored by International Federation Surveyors (FIG) commissions 3 and 7 was organized by Delft University of Technology in 2001. This working group provides a...

Numerical investigation of configuration with optimum swirl recovery for propeller propulsion systems

This paper addresses the design of swirl recovery vanes for propeller propulsion in tractor configuration at cruise conditions using numerical tools. A multi-fidelity optimization framework is formulated for the design purpose, which exploits low-fidelity potential flow-based analysis results as input for high-fidelity Euler equation-based...

Form-finding and construction of ice composite shell structures

By using inflatable moulds and then spraying cellulose-water mixture, one ice dome and two ice towers were built in Harbin in December 2016. During the whole process, form-finding of the inflatable moulds as well as the construction of these ice composite shell structures are very important for the final results.<br/>The mould for the ice dome...

Towards the integration of indoorGML and indoorlocationGML for indoor applications

This paper introduces and compares two types of GML-based data standards for indoor location-based services, i.e., iIndoorGML and iIndoorLocationGML. By elaborating the advantages of the both standards and their data models, we conclude that the two data standards are complementary to each other. A jointed data model is presented to show the...

Wall-shear stress measurements of turbulent flow over ribbed surfaces using the micro-pillar shear stress sensor MPS3

The drag reduction effect of a semi-circular riblet-structured surface in a turbulent boundary layer is experimentally investigated using the micro-pillar shear stress sensor MPS3. The MPS3 sensor is a novel tool for the quantitative measurement of the wall-shear stress distribution and possesses a high spatial and temporal resolution. The...

Hydrologic and cryospheric processes observed from space

Ten Dragon 3 projects deal with hydrologic and cryosphere processes, with a focus on the Himalayas and Qinghai – Tibet Plateau, but not limited to that. At the 1st Dragon 3 Progress Symposium in 2013 a significant potential for a better and deeper integration appeared very clearly and we worked out an overview of the ten projects identifying...

Test method to assess membrane layers fatigue response on orthotropic steel bridge decks

In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...

Finite element of multilayer surfacing systems on orthotropic steel bridges

Light weight orthotropic steel bridge decks have been widely utilized for bridges in seismic zones, movable bridges and long span bridges. In the last three decades, severe problems were reported in relation to asphaltic surfacing materials on orthotropic steel deck bridges. Earlier investigations have shown that the bonding strength of membrane...

Experimental investigation of multilayer surfacing system on orthotropic steel bridge with the five-point bending test

Due to lightweight and flexibility, orthotropic steel deck bridges become popular the last decades but several problems were reported in relation to asphalt surfacing materials such as rutting, cracking, loss of bond between the surfacing system and steel deck. In the Netherlands a surfacing structure for orthotropic steel bridge decks mostly...

Development of test method for assessing the bonding characteristics of membrane layers in wearing course laid on orthotropic steel bridge decks

In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...

Experimental investigation of the hydrodynamic characteristics of heave plates using forced oscillation

Analytical study on the vibration response of curved track subjected to moving load

Application of MAT device to characterize the adhesive bonding strength of membrane in orthotropic steel deck bridges

In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...

Advanced numerical study of the response of orthotropic steel deck bridge with two membrane layers system

In the Netherlands an asphaltic surfacing structure for orthotropic steel bridge decks mostly consists of two structural layers. The upper layer consists of Porous Asphalt (PA) because of reasons related to noise hindrance. For the lower layer a choice between Mastic Asphalt (MA) or Guss Asphalt (GA), can be made. In this paper, a typical Dutch...