- document
-
Bian, Dong (author), Zhou, Xiaochen (author), Liu, Jianing (author), Li, Wenting (author), Shen, Danni (author), Zheng, Yufeng (author), Gu, Wenda (author), Jiang, Jingjun (author), Li, Mei (author), Chu, Xiao (author), Ma, Limin (author), Wang, Xiaolan (author), Zhang, Yu (author), Leeflang, M.A. (author), Zhou, J. (author)Biodegradable stents can provide scaffolding and anti-restenosis benefits in the short term and then gradually disappear over time to free the vessel, among which the Mg-based biodegradable metal stents have been prosperously developed. In the present study, a Mg-8.5Li (wt.%) alloy (RE- and Al-free) with high ductility (> 40%) was...journal article 2021
- document
-
Li, M. (author), Jiang, X. (author), Carroll, James (author), Negenborn, R.R. (author)The increasing capacity of offshore wind energy around the world brings challenges in Operation and Maintenance (O&M) management. Over the past years, many studies have focused on developing sound maintenance strategies in order to minimize maintenance cost or maximize availability. One of the promising maintenance strategies is...conference paper 2021
- document
-
Liu, Y. (author), Ferrari, Riccardo M.G. (author), Wu, Ping (author), Jiang, X. (author), Li, Sunwei (author), van Wingerden, J.W. (author)Floating Offshore Wind Turbines (FOWTs) operate in the harsh marine environment with limited accessibility and maintainability. Not only failures are more likely to occur than in land-based turbines, but also corrective maintenance is more expensive. In the present study, a mixed model and signal-based Fault Diagnosis (FD) architecture is...journal article 2021
- document
-
Sokolovskij, R. (author), Zhang, Jian (author), Zheng, Hongze (author), Li, Wenmao (author), Jiang, Y. (author), Yang, Gaiying (author), Yu, H. (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)The present work reports on the hydrogen gas detection properties of Pt-AlGaN/GaN high electron mobility transistor (HEMT) sensors with recessed gate structure. Devices with gate recess depths from 5 to 15 nm were fabricated using a precision cyclic etching method, examined with AFM, STEM and EDS, and tested towards H 2 response at high...journal article 2020
- document
-
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author)The surface crack, also known as the partly through-thickness crack, is a serious threat to the structural integrity of offshore metallic pipes. In this paper, we review the research progress in regard to surface crack growth in metallic pipes subjected to cyclic loads from the fracture mechanics perspective. The purpose is to provide state-of...review 2020
- document
-
Li, X. (author), Jiang, X. (author), Hopman, J.J. (author)Flexible risers that for deep-water production are designed with strong collapse capacity. However, this collapse capacity is susceptible to pipe curvature in the flooded annulus condition. For the curved riser sections within the touchdown zone, significant reduction of collapse capacity can occur once the external sheaths are worn out,...journal article 2020
- document
-
Li, X. (author), Jiang, X. (author), Hopman, J.J. (author)As offshore hydrocarbon production moves towards ultra-deep water, flexible risers have to withstand the huge hydro-static pressure without collapse. They are designed with strong collapse capacities, allowing them to operate under the condition where their annuli are flooded by the seawater. However, initial imperfections can weaken the...journal article 2020
- document
-
Li, Z. (author), Jiang, X. (author), Hopman, J. (author), Zhu, Ling (author), Liu, Zhiping (author)In this paper, we analyse the surface crack growth in the Fibre-Reinforced Polymer (FRP) reinforced steel plates subjected to tension by means of the finite element (FE) method. Following the experimental study, a three-dimensional FE model is developed to evaluate the Stress Intensity Factor (SIF) of the surface crack, and the crack growth...journal article 2020
- document
-
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Z. (author), Tang, Weiguo (author)Surface cracked steel plates reinforced with single-side Fiber-Reinforced Polymer (FRP) subjected to cyclic tension are experimental studied. The main purpose is to analyze the effect of FRP reinforcement on the crack growth. The failure modes and their effects are analyzed as well. Given the single-side reinforcement, reinforcing the cracked...journal article 2020
- document
-
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Zhiping (author)In this paper, we experimentally studied the external surface crack growth in steel pipes reinforced with Composite System Repaired (CRS). CRS reinforced surface cracked API 5L X65 pipes were tested, containing three initial notch sizes and four reinforcement schemes. During the tests, the crack growth results, as well as the strain on the...journal article 2020
- document
-
Sokolovskij, R. (author), Zhang, Jian (author), Zheng, Hongze (author), Li, Wenmao (author), Jiang, Yang (author), Yang, Gaiying (author), Yu, Hongyu (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)The present work reports on the hydrogen gas detection properties of Pt-AlGaN/GaN high electron mobility transistor (HEMT) sensors with recessed gate structure. Devices with gate recess depths from 5 to 15 nm were fabricated using a precision cyclic etching method, examined with AFM, STEM and EDS, and tested towards H2 response at high...journal article 2020
- document
-
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Zhiping (author)In the present paper, we propose an analytical method to calculate the Stress Intensity Factor (SIF) of circumferential surface cracks in steel pipes subjected to bending. In light of pipe geometry and bending load case, the analytical formula is raised by introducing new bending correction factors and new geometry correction factors on the...journal article 2020
- document
-
Wang, K. (author), Li, Jiayuan (author), Yan, Xinping (author), Huang, Lianzhong (author), Jiang, X. (author), Yuan, Yupeng (author), Ma, Ranqi (author), Negenborn, R.R. (author)The optimization of ship energy consumption is attracting a great deal of attention, as societies seek to save energy and reduce emissions. Shipping companies are more concerned with the energy consumption of a ship fleet, as opposed to that of a single ship. Because the energy consumption of a fleet is influenced by multiple factors...journal article 2020
- document
- Feng, Xuesong (author), Li, Baibing (author), Lin, H.X. (author), Qin, Yong (author), Qian, Xuepeng (author), Jiang, Xiaobei (author) contribution to periodical 2020
- document
-
Wang, K. (author), Li, Jiayuan (author), Huang, Lianzhong (author), Ma, Ranqi (author), Jiang, X. (author), Yuan, Yupeng (author), Mwero, Ngome A. (author), Negenborn, R.R. (author), Sun, Peiting (author), Yan, Xinping (author)Energy saving and emission reduction have attracted a great deal of attention in the maritime industry. The optimization of a ship's energy efficiency can reduce energy consumption and CO<sub>2</sub> emissions effectively. However, most of the available studies only focus on either the sailing speed or route optimization, and the interaction...journal article 2020
- document
-
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author)In this paper, Composite Repair System (CRS) is applied to repair the circumferential internal surface cracked steel pipes subjected to bending. The Stress Intensity Factor (SIF) is quantitatively analysed by means of numerical simulations, and the crack growth rate is predicted by using the Paris’ law. First, the three-dimensional finite...journal article 2019
- document
-
Zhang, Jian (author), Sokolovskij, R. (author), Chen, Ganhui (author), Zhu, Yumeng (author), Qi, Yongle (author), Lin, Xinpeng (author), Li, Wenmao (author), Zhang, G. (author), Jiang, Yu-Long (author), Yu, Hongyu (author)In this paper, a method to extend the detection range of hydrogen sulfide (H<sub>2</sub>S) gas sensor is demonstrated. The sensor is based on AlGaN/GaN high electron mobility transistors (HEMTs) with Pt gate. It is observed that the as-fabricated devices exhibited sensing signal saturation at 30 ppm H<sub>2</sub>S exposure in dry air. A pre...journal article 2019
- document
-
Li, X. (author), Jiang, X. (author), Hopman, J.J. (author)A flexible riser is a flexible pipe that transports materials between seafloor and topside structures. As oil and gas production heads to water depths greater than 3000 meters, huge hydrostatic pressure may cause the collapse failure of flexible risers. Generally, the collapse strength of a flexible riser is designed by considering the effects...conference paper 2019
- document
-
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author)Fatigue is one of the major challenges of offshore rigid pipes. The surface crack is the main manifestation. Fatigue cracks are evolved from surface cracks which are frequently appear in the external surface of rigid pipes. Under fatigue loads, the surface cracks may continue to propagate and finally develop into penetrated cracks, which may...conference paper 2018
- document
- Li, X. (author), Jiang, X. (author), Hopman, J.J. (author) conference paper 2018