Searched for: +
(41 - 60 of 265)

Pages

document
Li, Shizhen (author), Jiang, Jing (author), Liu, X. (author), Wang, S. (author), Zhang, Zhonghua (author), Ye, Huaiyu (author)
Substrate metallization is a crucial factor affecting the mechanical properties of sintered nanoparticles in microelectronics applications, as it is essential for ensuring good adhesion between the substrate and the sintered material. In this study, we investigated the influence of metallization on pressure-assisted nanocopper sintering and...
conference paper 2023
document
Wang, S. (author), Tan, Yanlong (author), Liu, Xu (author), Li, Shizhen (author), Liu, Ke (author), Yuan, Wucheng (author), Li, Tao (author), Zhang, Kouchi (author), French, P.J. (author), Ye, Huaiyu (author), Tan, Chunjian (author)
In this article, the avalanche withstand capability and transient failure model of commercial 1200 V asymmetric trench gate SiC MOSFETs are investigated by experiment and simulation under single-pulse unclamped inductive switching (UIS) conditions. The limiting avalanche current and limiting avalanche energy of the device are determined by...
conference paper 2023
document
Ji, Liangzheng (author), Li, Zaihuan (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)
Micro LED displays offer superior performance compared to traditional LCD and OLED displays. However, challenges in transfer technology, such as high throughput and scalability, must be addressed. Among various mass transfer techniques, stamp transfer and laser-assisted transfer are widely used for Micro LED assembly. The laser-assisted transfer...
conference paper 2023
document
Wang, Xinyue (author), Yang, Zhoudong (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)
With the popularization of wide band-gap power modules in offshore wind power systems and water surface photovoltaic power stations, packaging materials face challenges of corrosion by salt, blended with high humidity. Copper-silver (Cu-Ag) composite sintered paste was proposed by researchers as a novel die-attach material for a lower cost...
conference paper 2023
document
Sattari, R. (author), Hu, D. (author), Liu, X. (author), van Zeijl, H.W. (author), Vollebregt, S. (author), Zhang, Kouchi (author)
The rapid development of power electronics has challenged the thermal integrity of semiconductor packaging. Further developments in this domain can be supported significantly by utilizing fast and flexible thermal characteristic evaluation. This study employs the transient dual interface method (TDIM) to characterize and compare the thermal...
journal article 2023
document
Liu, Huan (author), Wang, Shilei (author), Jing, Guoqing (author), Yu, Ziye (author), Yang, Jin (author), Zhang, Yong (author), Guo, Y. (author)
Vehicle-mounted ground-penetrating radar (GPR) has been used to non-destructively inspect and evaluate railway subgrade conditions. However, existing GPR data processing and interpretation methods mostly rely on time-consuming manual interpretation, and limited studies have applied machine learning methods. GPR data are complex, high...
journal article 2023
document
Sun, Zhu (author), Fang, Hui (author), Yang, J. (author), Qu, Xinghua (author), Liu, Hongyang (author), Yu, Di (author), Ong, Yew Soon (author), Zhang, Jie (author)
Recently, one critical issue looms large in the field of recommender systems - there are no effective benchmarks for rigorous evaluation - which consequently leads to unreproducible evaluation and unfair comparison. We, therefore, conduct studies from the perspectives of practical theory and experiments, aiming at benchmarking recommendation...
journal article 2023
document
Liu, Ke (author), Tan, C. (author), Li, Shizhen (author), Yuan, Wucheng (author), Liu, X. (author), Zhang, Kouchi (author), French, P.J. (author), Ye, H. (author), Wang, S. (author)
This paper proposes and simulates research on the reverse recovery characteristics of two novel superjunction (SJ) MOSFETs by adjusting the doping profile. In the manufacturing process of the SJ MOSFET using multilayer epitaxial deposition (MED), the position and concentration of each Boron bubble can be adjusted by designing different doping...
journal article 2023
document
Wang, Y. (author), Teetz, Niklas (author), Holtmann, Dirk (author), Alcalde, Miguel (author), van Hengst, J.M.A. (author), Liu, Xiaoxiao (author), Wang, Mengfan (author), Qi, Wei (author), Zhang, Wuyuan (author), Hollmann, F. (author)
Biocatalytic oxidation reactions of toluene derivates to the corresponding aldehydes are typically challenged by regio- and chemoselectivity issues. In this contribution we address both challenges by a combined reactant- and reaction engineering approach. We demonstrate that the peroxygenase-catalysed transformation of ring-substituted...
journal article 2023
document
Yao, Mingchen (author), Zhang, Yue (author), Dai, Zihan (author), Ren, Anran (author), Fang, Jiaxing (author), Li, Xiaoming (author), van der Meer, Walter (author), Medema, G.J. (author), Rose, Joan B. (author), Liu, Gang (author)
Premise plumbing plays an essential role in determining the final quality of drinking water consumed by customers. However, little is known about the influences of plumbing configuration on water quality changes. This study selected parallel premise plumbing in the same building with different configurations, i.e., laboratory and toilet...
journal article 2023
document
Lei, Xin (author), Zhang, Jiayan (author), Hong, H. (author), Wei, Jiangtao (author), Liu, Zewen (author), Jiang, Lei (author)
Solid-state nanopores attract widespread interest, owning to outstanding robustness, extensive material availability, as well as capability for flexible manufacturing. Bioinspired solid-state nanopores further emerge as potential nanofluidic diodes for mimicking the rectification progress of unidirectional ionic transport in biological K<sup>...
journal article 2023
document
Liu, Wei (author), Zhang, Wen (author), van der Linden, Dimitri (author), Bakker, Arnold B. (author)
Ruminative thoughts induced by the COVID-19 pandemic have an adverse impact on individual well-being. However, little is known about how to alleviate such a negative effect – let alone how a person can flourish during crises. The current study uses the self-determination model of flow to propose that two proactive behaviors, strength use and...
journal article 2023
document
Hu, D. (author), Qian, Cheng (author), Liu, X. (author), Du, L. (author), Sun, Zhongchao (author), Fan, X. (author), Zhang, Kouchi (author), Fan, J. (author)
As a promising technology for high-power and high-temperature power electronics packaging, nanocopper (nanoCu) paste sintering has recently received increasing attention as a die-attachment. The high-temperature deformation of sintered nanoCu paste and its underlying mechanisms challenge the reliability of high-power electronics packaging. In...
journal article 2023
document
Huang, Qian Ming (author), Yang, Huiru (author), Wang, S. (author), Liu, X. (author), Tan, C. (author), Luo, Anxin (author), Xu, Siyuan (author), Zhang, Kouchi (author), Ye, H. (author)
Laser-induced graphene (LIG) has aroused a wide range of research interests ranging from micro-nano energy devices to the Internet of Things (IoT). Nevertheless, the non-degradability of most-used synthetic polymer carbon sources poses a serious threat to the environment. In this work, ecofriendly chitosan-based derivatives, including...
journal article 2023
document
Wang, S. (author), Zong, Qihang (author), Yang, Huiru (author), Tan, C. (author), Huang, Qianming (author), Liu, X. (author), Zhang, Kouchi (author), French, P.J. (author), Ye, H. (author)
The fabrication of flexible pressure sensors with low cost, high scalability, and easy fabrication is an essential driving force in developing flexible electronics, especially for high-performance sensors that require precise surface microstructures. However, optimizing complex fabrication processes and expensive microfabrication methods...
journal article 2023
document
Zhang, Bo (author), Zhu, Zerui (author), Wang, Xuerui (author), Liu, X. (author), Kapteijn, F. (author)
Metal–organic frameworks (MOFs) are superior sorbents for water adsorption-based applications. The unique step-like water isotherm at a MOF-specific relative pressure allows easy loading and regeneration over a small range of temperature and pressure conditions. With good hydrothermal stability and cyclic durability, it stands out over...
review 2023
document
Wang, Xinyue (author), Yang, Zhoudong (author), Wang, Boya (author), Chen, Wei (author), Zhang, Kouchi (author), Zhang, Jing (author), Fan, J. (author), Liu, P. (author)
Power modules applied in offshore applications are facing risks of corrosion failures on die-attach materials due to high humidity and H<sub>2</sub>S exposure. To investigate such corrosion behavior for sintered die-attach materials, we conducted a study with four groups of samples fabricated using copper and silver metal particles under...
journal article 2023
document
Chen, Haixue (author), Wang, Xinyue (author), Zeng, Zejun (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)
With the development of electronic technology towards high power, miniaturization, and system integration, power electronic packaging is facing increasing challenges, especially for die attachment. This research aims to explore silver-coated copper (Cu@Ag) paste with sufficient mechanical properties and high-temperature reliability, as an...
journal article 2023
document
Liu, Zhengxuan (author), Zhang, Xiang (author), Sun, Ying (author), Zhou, Yuekuan (author)
Advanced controls have attracted increasing interests due to the high requirement on smart and energy-efficient (SEE) buildings and decarbonization in the building industry with optimal tradeoff strategies between energy consumption and thermal comfort of built environment. However, a state-of-the-art review is lacking on advanced controls...
journal article 2023
document
Liu, Zhengxuan (author), Yu, Chenxi (author), Qian, QK (author), Huang, R. (author), You, K. (author), Visscher, H.J. (author), Zhang, Guoqiang (author)
Under China's national strategy of carbon neutrality by 2060, it is urgently necessary and challenging for the governments to proactively explore policy tools to facilitate energy-efficient renovation of existing buildings. Currently, a considerable number of studies have been conducted on building energy-efficient renovation and its...
review 2023
Searched for: +
(41 - 60 of 265)

Pages