Link Quality-Based Transmission Power Adaptation for Reduction of Energy Consumption and Interference

Today, many wireless devices are mobile and battery powered. Based on the fact that battery capacity is still limited, energy saving is an important issue in wireless communication.Meanwhile, the number of wireless devices continues to increase and this creates interference problems between wireless devices. In this paper, we look at...

In vitro degradation behavior and cytocompatibility of Mg–Zn–Zr alloys

Zinc and zirconium were selected as the alloying elements in biodegradable magnesium alloys, considering their strengthening effect and good biocompatibility. The degradation rate, hydrogen evolution, ion release, surface layer and in vitro cytotoxicity of two Mg–Zn–Zr alloys, i.e. ZK30 and ZK60, and a WE-type alloy (Mg–Y–RE–Zr) were...

Peripheral Cluster versus New Town: A Comparative Study on Two Types of Peripheral Developments in the Beijing Metropolitan Region

Low-temperature fabrication of macroporous scaffolds through foaming and hydration of tricalcium silicate paste and their bioactivity

A low-temperature fabrication method for highly porous bioactive scaffolds was developed. The two-step method involved the foaming of tricalcium silicate cement paste and hydration to form calcium silicate hydrate and calcium hydroxide. Scaffolds with a combination of interconnected macro- and micro-sized pores were fabricated by making use of...

Development of engineered cementitious composites with limestone powder and blast furnace slag

Nowadays limestone powder and blast furnace slag (BFS) are widely used in concrete as blended materials in cement. The replacement of Portland cement by limestone powder and BFS can lower the cost and enhance the greenness of concrete, since the production of these two materials needs less energy and causes less CO2 emission than Portland cement...

Correlation between Electrical Resistivity, Particle Dissolution, Precipitation of Dispersoids, and Recrystallization Behavior of AA7020 Aluminum Alloy

This research concerns the effect of homogenization treatment on the electrical resistivity of AA7020 aluminum alloy variants with different Zr and Cr contents. Small changes in the Zr and Cr contents of the as-cast alloy increase the electrical resistivity significantly. After employing various homogenization treatments, the electrical...

Characteristics of the Friction Between Aluminium and Steel at Elevated Temperatures During Ball-on-Disc Tests

Appropriate specification of the frictional boundary condition for the finite-element (FE) simulation of metal-forming processes is of great importance to the trustworthiness of the results. The research reported in this communication aimed at understanding the interfacial contact between aluminium and steel at elevated temperatures and...

Flexible labor and innovation performance: Evidence from longitudinal firm-level data

Firms with high shares of workers on fixed-term contracts have significantly higher sales of imitative new products but perform significantly worse on sales of innovative new products (“first on the market”). High functional flexibility in “insider-outsider” labor markets enhances a firm’s new product sales, as do training efforts and highly...

Operation of grid-connected DFIG under unbalanced grid voltage condition

Doubly fed induction generator (DFIG) still shares a large part in today's wind power market. It provides the benefits of variable speed operation cost-effectively, and can control its active and reactive power independently. Crowbar protection is often adopted to protect the rotor-side voltage source converter (VSC) from transient overcurrent...

On the vorticity characteristics of lobe-forced mixer at different configurations

Lobe-forced mixer is one typical example of the passive flow controllers owing to its corrugated trailing edge. Besides the spanwise Kelvin–Helmholtz vortex shedding, streamwise vortices are also generated within its mixing layer. The geometrical configuration of the lobe significantly affects these two types of vortices, which in turn affects...

Evolution of Grain Boundary Phases during the Homogenization of AA7020 Aluminum Alloy

The presence of large constitutive particles formed during solidification decreases the strength and hot workability of aluminum alloys especially when they are located in the grain boundary (GB) regions. Therefore, the evolution of these phases is a major issue in the homogenization process of these alloys. There is a lack of information on the...

Strain-dependent constitutive analysis of three wrought Mg–Al–Zn alloys

The commonly used hyperbolic sine constitutive equation for metal forming at elevated temperatures, with no strain incorporated, is in principle applicable only to deformation in the steady state. However, the actual deformation processes applied to magnesium alloys are mostly in the non-steady state. In the present research, the results of hot...

High performance repetitive control of PWM DC-AC converters with real-time phase-lead FIR filter

Effect of shallow and narrow water on added mass of cylinders with various cross-sectional shapes