Searched for: +
(81 - 100 of 353)

Pages

document
Yuan, Xiangyang (author), Cui, Endian (author), Liu, K. (author), Jiang, Ying (author), Yang, Xiaoyan (author), Tang, Jianfeng (author), Yang, Lu (author), Liao, Xiaoling (author), Zhao, Yanan (author)
In this work, different lanthanides (Tm<sup>3+</sup>, Er<sup>3+</sup>; Yb<sup>3+</sup>, Ho<sup>3+</sup>, Nd<sup>3+</sup>) were doped into NaYF<sub>4</sub> via a high-temperature coprecipitation method, and followed by SiO<sub>2</sub> coating to improve the water dispersibility, resulting in NaYF<sub>4</sub>:Tm<sup>3+</sup>, Er<sup>3+</sup>...
journal article 2022
document
Li, Wei (author), Yi, Liming (author), Jiang, Wen (author), Dong, H. (author), Zhang, Yong (author)
This paper presents experimental investigations into the effects of ultrafine blast furnace slag on microstructure improvements against chloride penetration in saturated and unsaturated cementitious systems exposed to cyclic drying–wetting conditions. The hydration kinetics of ultrafine slag powders and pore solution chemistry in slag-blended...
journal article 2022
document
Ghorbanpour, S. (author), Deshmukh, Kaustubh (author), Sahu, Saswat (author), Riemslag, A.C. (author), Reinton, T.E. (author), Borisov, Evgenii (author), Jiang, Quanxin (author), Terol Sanchez, M. (author), Knezevic, Marko (author), Popovich, V. (author)
This paper addresses the effect of the post-process heat treatments on the microstructure and fatigue crack growth behaviour of the functionally graded (FG) laser powder bed fusion (L-PBF) Inconel 718 (IN718) superalloy. Sets of samples were additively manufactured (AM) altering the process parameters, namely the laser power, the laser...
journal article 2022
document
Cai, Jie (author), Jiang, X. (author), Yang, Yazhou (author), Lodewijks, Gabriel (author), Wang, Minchang (author)
A corrosion defect is recognized as one of the most severe phenomena for high-pressure pipelines, especially those served for a long time. Finite-element method and empirical formulas are thereby used for the strength prediction of such pipes with corrosion. However, it is time-consuming for finite-element method and there is a limited...
journal article 2022
document
Jiang, Xi (author), Zhang, X. (author), Wang, Shuai (author), Bai, Yun (author), Huang, Baoshan (author)
Pipe jacking has been the dominant trenchless technology for constructing small (\2 m) to medium-diameter (\4 m) tunnels. Uncertainties and construction difficulties increase significantly when the diameter of the tunnel exceeds 4 m. This paper presents a case study of the largest concrete pipe-jacking tunnel project in the world, the...
journal article 2022
document
He, X. (author), Jiang, C. (author), Li, L. (author), Blom, H.A.P. (author)
UAS-based commercial services such as urban parcel delivery are expected to grow in the upcoming years and may lead to a large volume of UAS operations in urban areas. These flights may pose safety risks to persons and property on the ground, which are referred to as third-party risks. Path-planning methods have been developed to generate a...
journal article 2022
document
Jiang, Min (author), Jia, Li (author), Menenti, M. (author), Zeng, Yelong (author)
The region-wide spatial pattern of the drivers of vegetation trends in the African Sahel-Sudano-Guinean region, one of the main drylands of the world, has not been fully investigated. Time-series satellite earth observation datasets were used to investigate spatiotemporal patterns of the vegetation greenness changes in the region and then a...
journal article 2022
document
Wang, Q. (author), Zietzschmann, F.E. (author), Hofman-Caris, Roberta (author), Jiang, N. (author), Schuster, Jonas (author), Wang, Zheng (author), Yu, Jianwei (author), Yang, Min (author), Rietveld, L.C. (author)
It was widely acknowledged that dissolved organic matter (DOM) in natural water has ubiquitous competitiveness against organic micropollutants (OMPs) during adsorption onto activated carbon. However, some (model) low molecular weight organics have been reported to adsorb onto activated carbon, but were not competitive against co-adsorbates....
journal article 2022
document
Ekka, A. (author), Keshav, Saket (author), Pande, S. (author), van der Zaag, P. (author), Jiang, Yong (author)
Study region: Upper Cauvery river basin, India Study focus: Reservoir construction is one of the major contributors to changes in natural river flow regime characteristics. This study aims to understand the hydrological alterations resulting from the construction of reservoirs and water abstraction in the upper regions of the basin. The...
journal article 2022
document
Anderson, K.S. (author), Visser, Denise (author), Mannen, Jan-Willem (author), Jiang, Yuxiang (author), van Deursen, A. (author)
Background: Applying Continuous Experimentation on a large scale is not easily achieved. Although the evolution within large tech organisations is well understood, we still lack a good understanding of how to transition a company towards applying more experiments. Objective: This study investigates how practitioners define, value and apply...
conference paper 2022
document
Feng, Shuo (author), Jiang, Tao (author), Chen, Wei (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, Jiajie (author)
As a core packaging material of light color conversion, phosphor/silicone composite plays an indispensable role in light emitting diode (LED) packaging. At present, commercial LED packages mainly use blue LED chips to stimulate Yttrium Aluminum Garnet (YAG) yellow phosphor to reach a white color. However, (Ca,Sr)AlSiN 3 :Eu 2+ (CSASN) red...
conference paper 2022
document
Li, Shizhen (author), Liu, X. (author), Jiang, Jing (author), Tan, C. (author), Gao, Chenshan (author), Liu, Yang (author), Ye, H. (author), Zhang, Kouchi (author)
Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular...
conference paper 2022
document
Tan, C. (author), Wang, S. (author), Liu, X. (author), Jiang, Jing (author), Zhang, Kouchi (author), Ye, H. (author)
On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid...
conference paper 2022
document
Hou, Shuhan (author), Wang, Zhaokun (author), Yang, Huiru (author), Jiang, Jing (author), Gao, Chenshan (author), Liu, Yufei (author), Tang, Xiaosheng (author), Ye, H. (author)
For the relevant properties of pristine and doped (Si, P, Se, Te, As) monolayer WS<sub>2</sub> before and after the adsorption of CO, CO<sub>2</sub>, N<sub>2</sub>, NO, NO<sub>2</sub> and O<sub>2</sub>, density functional theory (DFT) calculations are made. Calculation results reveal that the monolayer WS<sub>2</sub> doped with P and As atoms...
journal article 2022
document
Lu, Jing (author), Jia, Li (author), Zhou, Jie (author), Jiang, Min (author), Zhong, Yulong (author), Menenti, M. (author)
A drought-induced water storage deficit index (D-WSDI) is proposed to quantify the response of GRACE-based terrestrial water storage change to meteorological drought and the impact of drought on water storage deficit. D-WSDI is defined as the normalized residual component of GRACE time-series data after removing the long-term trend and...
journal article 2022
document
Zang, Y. (author), Qian, Yong (author), Zhou, Xiaoli (author), Ghaffarian Niasar, M. (author), Sheng, Gehao (author), Jiang, Xiuchen (author)
Optical partial discharge (PD) detection is an efficient means of diagnosing the insulation status of power equipment. C4F7N/CO2 gas mixture is a very potential environmentally-friendly SF6 substitute gas, and its PD optical characteristics need to be studied to guide the PD diagnosis of novel C4F7N/CO2 equipment. Therefore, this article...
journal article 2022
document
Xiao, Hong (author), Zhang, Zhihai (author), Chi, Yihao (author), Wang, Xiaoyu (author), Wang, Haoyu (author), Jiang, Ziqing (author)
The sand intrusion in railway tracks in sandy regions can significantly change the mechanical behaviour of tracks and thus threaten the safety of train operation. This paper presents substantial field tests on both sandy and clean railway tracks to study the effect of sand intrusion on the longitudinal resistance of ballast bed and the...
journal article 2022
document
Giasin, Khaled (author), Atif, Muhammad (author), Ma, Yuan (author), Jiang, Chulin (author), Koklu, Ugur (author), Sinke, J. (author)
GLARE laminates are multi-layered metal-composite materials created from bonding sheets of metallic alloys with carbon or glass fibre layers. The application of hybrid-conventional machining processes such as ultrasonic-assisted drilling (UAD) is becoming of great interest to the aerospace industry due to its capability in reducing the...
journal article 2022
document
Liu, Letao (author), Jiang, Xudong (author), Saerbeck, Martin (author), Dauwels, J.H.G. (author)
This paper proposes a Recurrent Affine Transform Encoder (RATE) that can be used for image representation learning. We propose a learning architecture that enables a CNN encoder to learn the affine transform parameter of images. The proposed learning architecture decomposes an affine transform matrix into two transform matrices and learns them...
journal article 2022
document
Jiang, Y. (author), Dai, R. (author), Zeng, J. (author), Butler, R.M. (author), Vijfvinkel, T.S. (author), Wang, Y. (author), van den Dobbelsteen, J.J. (author), van der Elst, M. (author), Dauwels, J.H.G. (author)
Workflow analysis is a young research field that has been gaining traction in recent years. Work in this field aims to improve the efficiency and safety in operating rooms by analysing surgical processes and providing feedback or support, where observations are made and evaluated by algorithms rather than human experts. For our study, we mount...
conference paper 2022
Searched for: +
(81 - 100 of 353)

Pages