Searched for: +
(1 - 20 of 52)

Pages

document
Pasman, Hans (author), Sun, H. (author), Yang, M. (author), Khan, Faisal (author)
Digital technologies have been reshaping how the process industries operate. The extensive use of physical and information digitalization called by ambitious revolution to redesign process plants significantly transforms the process safety landscape in the process industries. Digitalization depends on the reliable use of data. This becomes a new...
book chapter 2022
document
Yang, Jingbin (author), Sun, Zhenping (author), Yanliang, Ji (author), Li, Biyun (author), Pang, Min (author)
As an internal curing material, superabsorbent polymers (SAPs) can effectively reduce the risk of volume shrinkage of cement-based materials. By preparing the cement paste mixed with SAPs, the amount of pre-absorbed water and the water-cement ratio of paste on the water absorption-release behavior in the fresh cement paste were studied by using...
conference paper 2021
document
Yang, D. (author), Sun, Y. (author), Turrin, M. (author), von Buelow, P. (author), Paul, J.C. (author)
Currently, in the conceptual envelope design of sports facilities, multiple engineering performance feedbacks (e.g. daylight, energy and structural performance) are expected to assist architectural design decision-making. In general, it is known as Building Performance Optimization in the conceptual architectural design phase. Essentially, it...
conference paper 2015
document
We investigate the double diffusive convection between two parallel plates with either no-slip or free-slip boundary conditions. Direct numerical simulations have been conducted systematically for a series of control parameters. Salt fingers can be observed for both boundary conditions and all parameters explored. Compared to the no-slip case,...
conference paper 2015
document
Pang, Min (author), Sun, Zhenping (author), Ji, Yanliang (author), Yang, Jingbin (author), Wang, Peiming (author), Xu, Yaling (author), Li, Huanhuan (author), Liu, Jiaying (author), Li, Fei (author)
Characteristics of fly ash(FA) blended mortars (50%, 70% and 90%) at different curing ages (28 days and 180 days) under ammonium chloride solution(ACS) leaching were investigated. Mass loss under leaching, initial CaO content, Ca(OH)2 content(CH), content of chemical bonded water, and hydration degree of blended pastes were tested by XRF and DSC...
conference paper 2021
document
Yang, J. (author), Sun, Zhu (author), Bozzon, A. (author), Zhang, J. (author), Larson, M.A. (author)
The "International Workshop on Recommender Systems for Citizens" (CitRec) is focused on a novel type of recommender systems both in terms of ownership and purpose: recommender systems run by citizens and serving society as a whole.
conference paper 2017
document
Yang, D. (author), Sun, Y (author), Di Stefano, D. (author), Turrin, M. (author), Sariyildiz, I.S. (author)
Surrogate-based Optimization is a useful approach when the objective function is computationally expensive to evaluate, compared to Simulation-based Optimization. In the surrogate-based method, analytically tractable “surrogate models” (also known as “Response Surface Models — RSMs” or “metamodels”), are constructed and validated for each...
conference paper 2016
document
Sun, Zhu (author), Yang, J. (author), Zhang, Jie (author), Bozzon, A. (author), Chen, Yu (author), Xu, Chi (author)
Representation learning (RL) has recently proven to be effective in capturing local item relationships by modeling item co-occurrence in individual user's interaction record. However, the value of RL for recommendation has not reached the full potential due to two major drawbacks: 1) recommendation is modeled as a rating prediction problem...
conference paper 2017
document
Sun, Zhu (author), Yang, J. (author), Zhang, J. (author), Bozzon, A. (author), Huang, Long Kai (author), Xu, Chi (author)
Knowledge graphs (KGs) have proven to be effective to improve recommendation. Existing methods mainly rely on hand-engineered features from KGs (e.g., meta paths), which requires domain knowledge. This paper presents RKGE, a KG embedding approach that automatically learns semantic representations of both entities and paths between entities...
conference paper 2018
document
Yang, D. (author), Sun, Yimin (author), Di Stefano, D. (author), Turrin, M. (author)
The comparison of various competing design concepts during conceptual architectural design is commonly needed for achieving a good final concept. For this, computational design exploration is a key approach. Unfortunately, most<br/>of existing research tends to skip this crucial process, and purely focuses on the late-stage design optimization...
conference paper 2017
document
Fu, Bin (author), Sun, B. (author), Guo, Hang (author), Yang, Tao (author), Fu, Wenxing (author)
The current study presents an online iterative adaptive dynamic programming approach to resolve the zero-sum game (ZSG) for nonlinear continuous-time (CT) systems containing a partially unknown dynamic. The Hamilton-Jacobian-Issacs (HJI) equation is solved along the state trajectory according to the value function approximation and the policy...
conference paper 2023
document
Sun, Zhu (author), Yang, J. (author), Feng, Kaidong (author), Fang, Hui (author), Qu, Xinghua (author), Ong, Yew Soon (author)
Product bundling is a commonly-used marketing strategy in both offline retailers and online e-commerce systems. Current research on bundle recommendation is limited by: (1) noisy datasets, where bundles are defined by heuristics, e.g., products co-purchased in the same session; and (2) specific tasks, holding unrealistic assumptions, e.g.,...
conference paper 2022
document
Zhu, G. (author), Xiao, Y. (author), Yang, Y. (author), Wang, J. (author), Sun, B. (author), Boom, R. (author)
Recycling of aluminum alloy scrap obtained from delaminated fibre metal laminates (FMLs) was studied through high temperature refining in the presence of a salt flux. The aluminum alloy scrap contains approximately mass fraction w(Cu) = 4.4%, w(Mg) = 1.1% and w(Mn) = 0.6% (2024 aluminum alloy). The main objective of this research is to obtain a...
journal article 2012
document
Sun, L. (author), Di Carlo, L. (author), Reed, M.D. (author), Catelani, G. (author), Bishop, L.S. (author), Schuster, D.I. (author), Johnson, B.R. (author), Yang, G.A. (author), Frunzio, L. (author), Glazman, L. (author), Devoret, M.H. (author), Schoelkopf, R.J. (author)
We have engineered the band gap profile of transmon qubits by combining oxygen-doped Al for tunnel junction electrodes and clean Al as quasiparticle traps to investigate energy relaxation due to quasiparticle tunneling. The relaxation time T1 of the qubits is shown to be insensitive to this band gap engineering. Operating at relatively low-EJ/EC...
journal article 2012
document
Sun, Q. (author), Wang, Y. (author), Yang, J. (author), Qiu, Y. (author), Zhang, H. (author)
This paper presents a method to control chaotic behavior of a typical Smart Grid based on generalized fuzzy hyperbolic model (GFHM). As more and more distributed generations (DG) are incorporated into the Smart Grid, the chaotic behavior occurs increasingly. To verify the behavior, a dynamic model which describes a power system with DG is...
journal article 2014
document
Zhu, G. (author), Xiao, Y. (author), Yang, Y. (author), Wang, J. (author), Sun, B. (author), Boom, R. (author)
GLARE (glass fibre/epoxy reinforced aluminum laminate) is a member of the fiber metal laminate (FML) family, and is built up of alternating metal and fiber layers. About 500m2 GLARE is employed in each Airbus A380 because of the superior mechanical properties over the monolithic aluminum alloys, such as weight reduction, improved damage...
journal article 2012
document
Yang, Yapin (author), Sun, Ying (author), Chen, Mingsi (author), Zhou, Yuekuan (author), Wang, Ran (author), Liu, Zhengxuan (author)
Fire at a construction site usually results in serious accidents. Therefore, fire management at the construction site is critical to decreasing possible accidents. However, conventional fire safety management can be problematic in many aspects, such as visualization, multi-stage alarm systems, and dynamic escape route optimization. To solve...
journal article 2022
document
Sun, Hao (author), Wang, Haiqing (author), Yang, M. (author), Reniers, G.L.L.M.E. (author)
To quantify the pandemic specific impact with respect to the risk related to the chemical industry, a novel risk analysis method is proposed. The method includes three parts. Firstly, the two types of “window of opportunity” (WO) theory is proposed to divide an accident life cycle into two parts. Then, a qualitative risk analysis is conducted...
journal article 2020
document
Xu, J. (author), Yang, Gongliu (author), Sun, Yiding (author), Picek, S. (author)
The current navigation systems used in many autonomous mobile robotic applications, like unmanned vehicles, are always equipped with various sensors to get accurate navigation results. The key point is to fuse the information from different sensors efficiently. However, different sensors provide asynchronous measurements, some of which even...
journal article 2021
document
Sun, Hao (author), Wang, Haiqing (author), Yang, M. (author), Reniers, G.L.L.M.E. (author)
The performance assessment of safety barriers is essential to find vulnerable elements in a safety barrier system. Traditional performance assessment approaches mainly focus on using several static indicators for quantifying the performance of safety barriers. However, with the increasing complexity of the system, emerging hazards are highly...
journal article 2021
Searched for: +
(1 - 20 of 52)

Pages