Searched for: +
(1 - 20 of 39)

Pages

document
Taal, J.R. (author), Chen, Z. (author), He, Y. (author), Lagendijk, R.I.L. (author)
Wireless and Internet video applications are inherently subjected to bit errors and packet errors, respectively. This is especially so if constraints on the end-to-end compression and transmission latencies are imposed. Therefore, it is necessary to develop methods to optimize the video compression parameters and the rate allocation of these...
journal article 2004
document
Ishihara, R. (author), Chen, T. (author), Van der Zwan, M. (author), He, M. (author), Schellevis, H. (author), Beenakker, K. (author)
Existent flat-panel display is mechanically stiff because it requires external connection of IC chips. At its present stage, displays with a-Si, metal oxide semiconductor or organic TFTs require still external connection of data driver and controllers, because of their low carrier mobilities. We will review our recent progress on direct...
conference paper 2011
document
He, Y. (author), Chen, J.Y. (author), Knab, J.R. (author), Zheng, W. (author), Markelz, A.G. (author)
We investigate the presence of structural collective motions on a picosecond timescale for the heme protein, cytochrome c, as a function of oxidation and hydration, using terahertz (THz) time domain spectroscopy and molecular dynamics simulations. The THz response dramatically increases with oxidation, with the largest increase for lowest...
journal article 2011
document
Xiao, Jing (author), Wei, Qi-Qin (author), Yang, Daoguo (author), Zhang, Ping (author), He, Ning (author), Zhang, Kouchi (author), Ren, Tian-Ling (author), Chen, Xian-Ping (author)
The emerging field of nanophotonics requires plasmonic devices to be fully compatible with semiconductor fabrication techniques. However, very few feasible practical structures exist at present. Here, we propose a CMOS-compatible hybrid plasmonic slot waveguide (HPSW) with enhanced field confinement. Our simulation results show that the HPSW...
journal article 2016
document
Xiao, Jing (author), Wei, Qi-Qin (author), Yang, Duo Guo (author), Zhang, Ping (author), He, Ning (author), Zhang, Kouchi (author), Chen, Xian Ping (author)
The slot waveguide has attracted considerable attention because of its ability to confine and guide electromagnetic energy at the subwavelength scale beyond the diffraction limit. We propose a novel terahertz slot waveguide structure to achieve a better tradeoff between propagation length and field confinement capacity, the novel waveguide...
journal article 2017
document
He, L. (author), de Weerdt, M.M. (author), Yorke-Smith, N. (author), Liu, Xiaolu (author), Chen, Yingwu (author)
Agile Earth observation satellite (AEOS) scheduling is complex, due to long visible time windows and time-dependent transitions between observations. We introduce a generic approach suited for scheduling problems characterised by time-dependency and/or sequence-dependency. Our approach is a novel hybridization of adaptive large neighbourhood...
conference paper 2018
document
Li, Mengxia (author), Mou, Junmin (author), Liu, Rongfang (author), Chen, P. (author), Dong, Zhuojian (author), He, Yixiong (author)
Following the growth in global trade activities, vessel traffic has increased dramatically in some busy waterways and ports. However, such increments have made it more complex to manage the regional vessel traffic, which can increase the risk of an accident in the area. To model and analyze the relationship between vessel traffic and maritime...
journal article 2019
document
Chen, Zhuo Yi (author), Li, Chuan Xi (author), He, Jun (author), Xin, H. (author)
Diaphragm cutouts are set to release redundant constraints and hence reduce weld fatigue at the connection of U-ribs to diaphragms in orthotropic steel decks. However, most fatigue cracks which originate from the edge of cutouts are in fact detected in the diaphragms. Therefore, a retrofit technology on cracked cutouts at the diaphragm is...
journal article 2020
document
Ko, Ching Yun (author), Chen, Cong (author), He, Zhuolun (author), Zhang, Yuke (author), Batselier, K. (author), Wong, Ngai (author)
Sum-product networks (SPNs) constitute an emerging class of neural networks with clear probabilistic semantics and superior inference speed over other graphical models. This brief reveals an important connection between SPNs and tensor trains (TTs), leading to a new canonical form which we call tensor SPNs (tSPNs). Specifically, we...
journal article 2020
document
Xiong, Yongming (author), Li, Chuanxi (author), Chen, Zhuoyi (author), He, Jun (author), Xin, H. (author)
Residual stresses change the stress ratio of fluctuating stresses, hence seriously affect the fatigue life of orthotropic steel decks (OSDs) under traffic loading. Residual stress distributions near the U rib-diaphragm joints are very complicated and need to be investigated further. In this paper, a systematic method has been proposed for...
journal article 2020
document
Wang, Jin (author), Han, Hui (author), Li, H. (author), He, Shiming (author), Sharma, Pradip Kumar (author), Chen, Lydia Y. (author)
Due to high capacity and fast transmission speed, 5G plays a key role in modern electronic infrastructure. Meanwhile, sparse tensor factorization (STF) is a useful tool for dimension reduction to analyze high-order, high-dimension, and sparse tensor (HOHDST) data, which is transmitted on 5G Internet-of-things (IoT). Hence, HOHDST data relies...
journal article 2021
document
Sun, Xiaoliang (author), Zhou, Guanggang (author), Liu, Z. (author), Zhu, Jianwei (author), Guo, Fengzhi (author), Chen, Junqing (author), He, Wenhao (author), Wang, Ning (author), Zhao, Ge (author), Lu, Guiwu (author)
The controllability of mining is a key factor affecting the commercial application of methane hydrates, and the addition of chemical additives can significantly accelerate the mining process. However, the effect of additive concentration on hydrate decomposition is not yet well understood. In this study, we systematically investigate the...
journal article 2021
document
Chen, Xiaoyan (author), He, Qinghua (author), Zhang, Xinyue (author), Cao, Tingting (author), Liu, Y. (author)
Collaborative innovation has become an innovation paradigm to improve innovation performance and firms’ economic output. However, there is relatively little research investigating stakeholders’ drivers for engaging in collaborative innovation and the relative importance of drivers in infrastructure megaprojects. This research aims to address...
journal article 2021
document
He, Cyuan Lun (author), Liang, Fang Cheng (author), Veeramuthu, Loganathan (author), Cho, Chia Jung (author), Benas, Jean Sebastien (author), Tzeng, Yung Ru (author), Tseng, Yen Lin (author), Chen, Wei Cheng (author), Rwei, A.Y. (author), Kuo, Chi Ching (author)
Self-healing soft electronic material composition is crucial to sustain the device long-term durability. The fabrication of self-healing soft electronics exposed to high moisture environment is a significant challenge that has yet to be fully achieved. This paper presents the novel concept of a water-assisted room-temperature autonomous self...
journal article 2021
document
Chen, Y. (author), He, S. (author), Zhang, Y. (author), Wan, Z. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)
This paper aims to investigate the influences of high Portland cement substitutions (>60 wt%) by low-grade calcined clay (CC) and limestone (LF) on 3D concrete printability, stiffness evolution and early-age hydration. Results show that, with the same dosage of admixtures (superplasticizer and viscosity modifier), increasing LF and CC...
journal article 2021
document
Zhu, Jingyu (author), Chen, Guoming (author), Khan, Faisal (author), Yang, M. (author), Li, Xinhong (author), Meng, Xiangkun (author), He, Rui (author)
Managed Pressure Drilling (MPD) system is widely used in the deepwater drilling operation. Reliability assessment plays a critical role in the MPD system in the management of drilling operation risk and the prevention of blowouts. However, the reliability assessment of the MPD system is challenged due to its sequential operations and multiple...
journal article 2021
document
Chen, Y. (author), Chang, Z. (author), He, S. (author), Copuroglu, Oguzhan (author), Šavija, B. (author), Schlangen, E. (author)
A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet...
journal article 2022
document
Yang, W. (author), He, Renke (author), Chen, Tingshu (author), Goossens, R.H.M. (author), Huysmans, T. (author)
Analysing the contact area between head-related products and the corresponding craniofacial profile is necessary to make such products more comfortable. The study of soft tissue biomechanical experiments provides a reliable perspective for understanding such contact areas and improving the comfort. In order to obtain more accurate and visualized...
journal article 2022
document
Liang, M. (author), Chang, Z. (author), He, S. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Early-age stress (EAS) is an important index for evaluating the early-age cracking risk of concrete. This paper encompasses a thermo-chemo-mechanical (TCM) model and active ensemble learning (AEL) for predicting the EAS evolution. The TCM model provides the data for the AEL model. First, based on Fourier's law, Arrhenius’ equation, and rate...
journal article 2022
document
Gao, Z. (author), He, J. (author), Fritz, Martin (author), Gong, J. (author), Shen, Y. (author), Zong, Z. (author), Chen, Peng (author), Staszewski, R.B. (author), Alavi, S.M. (author), Babaie, M. (author)
In a fractional-N PLL, it is beneficial to minimize the input range of its phase detector (PD) as it promotes better linearity and higher PD gain for suppressing noise contributions of the following loop components. This can be done by canceling the predicted instantaneous time offset between the frequency reference (FREF) and the variable...
conference paper 2022
Searched for: +
(1 - 20 of 39)

Pages