Searched for: +
(21 - 40 of 154)

Pages

document
Han, C. (author), Yang, G. (author), Procel Moya, P.A. (author), O'Connor, D. (author), Zhao, Y. (author), Gopalakrishnan, Anirudh (author), Zhang, Xiaodan (author), Zeman, M. (author), Mazzarella, L. (author), Isabella, O. (author)
Bifacial (BF) copper-plated crystalline silicon solar cell is an attractive topic to concurrently reduce silver consumption and maintain good device performance. However, it is still challenging to realize a high aspect ratio (AR) of the metal fingers. Herein, a new type of hybrid-shaped Cu finger is electromagnetically fabricated in a BF...
journal article 2022
document
Zhao, Y. (author), Procel Moya, P.A. (author), Smets, A.H.M. (author), Mazzarella, L. (author), Han, C. (author), Yang, G. (author), Cao, L. (author), Yao, Z. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Excellent surface passivation induced by (i)a-Si:H is critical to achieve high-efficiency silicon heterojunction (SHJ) solar cells. This is key for conventional single-junction cell applications but also for bottom cell application in tandem devices. In this study, we investigated the effects of (i)a-Si:H deposition temperature on passivation...
journal article 2022
document
Calcabrini, A. (author), Procel Moya, P.A. (author), Kambhampati, V. (author), Manganiello, P. (author), Muttillo, M. (author), Zeman, M. (author), Isabella, O. (author)
The integration of photovoltaic (PV) technology in urban environments poses new challenges for the design of PV modules. In particular, the poor shading tolerance of conventional PV modules strongly limits the energy performance of urban PV systems. In this work, we analyze how interdigitated back-contact solar cells with low-breakdown...
journal article 2022
document
Ferri, Carlotta (author), Ziar, H. (author), Nguyen, T.T. (author), van Lint, J.W.C. (author), Zeman, M. (author), Isabella, O. (author)
After developing the methodology, we applied it to the case of the Netherlands highways. We show that the average irradiation on the Dutch highway network is around 880 kWh/m2/y, 35% less than the potential of an optimally tilted conventional PV system in the south of the Netherlands. Covering the entire 1600 km of the Dutch highways network...
journal article 2022
document
Yang, G. (author), Han, C. (author), Procel Moya, P.A. (author), Zhao, Y. (author), Singh, M. (author), Mazzarella, L. (author), Zeman, M. (author), Isabella, O. (author)
Crystalline silicon solar cells with passivating contacts based on doped poly-Si exhibit high optical parasitic losses. Aiming at minimizing these losses, we developed the oxygen-alloyed poly-Si (poly-SiOx) as suitable material for passivating contacts. From passivation point of view, poly-SiOx layers show excellent passivation quality and...
journal article 2022
document
Cao, L. (author), Procel Moya, P.A. (author), Alcañiz Moya, A. (author), Yan, J. (author), Tichelaar, F.D. (author), Özkol, E. (author), Zhao, Y. (author), Han, C. (author), Yang, G. (author), Yao, Z. (author), Zeman, M. (author), Santbergen, R. (author), Mazzarella, L. (author), Isabella, O. (author)
Thin films of transition metal oxides such as molybdenum oxide (MoO<sub>x</sub>) are attractive for application in silicon heterojunction solar cells for their potential to yield large short-circuit current density. However, full control of electrical properties of thin MoO<sub>x</sub> layers must be mastered to obtain an efficient hole...
journal article 2022
document
Santbergen, R. (author), Vogt, M.R. (author), Mishima, Ryota (author), Hino, Masashi (author), Uzu, Hisashi (author), Adachi, Daisuke (author), Yamamoto, Kenji (author), Zeman, M. (author), Isabella, O. (author)
We investigate gentle front side textures for perovskite/silicon tandem solar cells. These textures enhance the absorption of sunlight, yet are sufficiently gentle to allow deposition of an efficient perovskite top cell. We present a tandem solar cell with such gentle texture, fabricated by Kaneka corporation, with an efficiency as high as 28...
journal article 2022
document
Chaudhary, A. (author), Hos, Jan (author), Lossen, Jan (author), Huster, Frank (author), Kopecek, Radovan (author), van Swaaij, R.A.C.M.M. (author), Zeman, M. (author)
In this article, we investigate the passivation quality and electrical contact properties for samples with a 150 nm thick n+ polysilicon layer in comparison to samples with a phosphorus diffused layer. High level of passivation is achieved for the samples with n+ polysilicon layer and an interfacial oxide underneath it. The contact properties...
journal article 2022
document
Chen, N. (author), Rudolph, Dominik (author), Peter, Christoph (author), Zeman, M. (author), Isabella, O. (author), Rosen, Yitzchak (author), Grouchko, Michael (author), Shochet, Ofer (author), Mihailetchi, Valentin D. (author)
The high usage of silver in industrial solar cells may limit the growth of the solar industry. One solution is to replace Ag with copper. A screen printable Cu paste is used herein to metallize industrial interdigitated back contact (IBC) solar cells. A novel metallization structure is proposed for making solar cells. Cu paste is applied to...
journal article 2022
document
Aonuki, S. (author), Yamashita, Yudai (author), Limodio, G. (author), Narita, Shunsuke (author), Takayanagi, Kaori (author), Iwai, Ai (author), Toko, Kaoru (author), Zeman, M. (author), Isabella, O. (author), Suemasu, Takashi (author)
We formed phosphorous(P)-ion-implanted n-BaSi<sub>2</sub> films on p-Si(111) substrates and demonstrated solar-cell functionality of the n-BaSi<sub>2</sub>/p-Si heterojunction under AM1.5 illumination. The BaSi<sub>2</sub> films were grown by molecular beam epitaxy, followed by implantation of P ions to the BaSi<sub>2</sub> films using PF<sub...
journal article 2022
document
Scire, D. (author), Procel Moya, P.A. (author), Gulino, Antonino (author), Isabella, O. (author), Zeman, M. (author), Crupi, Isodiana (author)
Ref. [56] was unfortunately wrong, Instead of [56] Corless, R. M.; Gonnet, G. H.; Hare, D. E. G.; Jeffrey, D. J.; Knuth, D. E. On the Lambert W function. Adv. Comput. Math. 1996, 5, 329–359. It should be changed to Biswas, R. K.; Khan, P.; Mukherjee, S.; Mukhopadhyay, A. K.; Ghosh, J.; Muraleedharan, K. Study of short range structure of...
journal article 2022
document
Martinez Lopez, V.A. (author), Žindžiūtė, U. (author), Ziar, H. (author), Zeman, M. (author), Isabella, O. (author)
Irradiance variability is one of the main challenges for using photovoltaic energy. This variability affects the operation of maximum power point trackers (MPPT) causing energy losses. The logic of the Perturb-and-Observe MPPT algorithm is particularly sensitive to quick irradiance changes. We quantified the existing relation between irradiance...
journal article 2022
document
Calcabrini, A. (author), Cardose, Ruben (author), Gribnau, David (author), Babal, Pavel (author), Manganiello, P. (author), Zeman, M. (author), Isabella, O. (author)
The accurate computation of the irradiance incident on the surface of photovoltaic modules is crucial for the simulation of the energy yield of a photovoltaic system. Depending on the geometrical complexity of the surroundings, different approaches are commonly employed to calculate the irradiance on the photovoltaic system. In this article,...
journal article 2022
document
Vogt, M.R. (author), Ruiz Tobon, C.M. (author), Alcañiz Moya, A. (author), Procel Moya, P.A. (author), Blom, Y. (author), Nour El Din, A. (author), Stark, T. (author), Wang, Z. (author), Goma, E. Garcia (author), Etxebarria, J. G. (author), Ziar, H. (author), Zeman, M. (author), Santbergen, R. (author), Isabella, O. (author)
We introduce a novel simulation tool capable of calculating the energy yield of a PV system based on its fundamental material properties and using self-consistent models. Thus, our simulation model can operate without measurements of a PV device. It combines wave and ray optics and a dedicated semiconductor simulation to model the...
journal article 2022
document
Han, C. (author), Santbergen, R. (author), van Duffelen, Max (author), Procel Moya, P.A. (author), Zhao, Y. (author), Yang, G. (author), Zhang, Xiaodan (author), Zeman, M. (author), Mazzarella, L. (author), Isabella, O. (author)
Reducing indium consumption, which is related to the transparent conductive oxide (TCO) use, is a key challenge for scaling up silicon heterojunction (SHJ) solar cell technology to terawatt level. In this work, we developed bifacial SHJ solar cells with reduced TCO thickness. We present three types of In<sub>2</sub>O<sub>3</sub>-based TCOs,...
journal article 2022
document
Zhao, Y. (author), Procel Moya, P.A. (author), Han, C. (author), Mazzarella, L. (author), Yang, G. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Low activation energy (E<sub>a</sub>) and wide bandgap (E<sub>g</sub>) are essential for (p)-contacts to achieve effective hole collection in silicon heterojunction (SHJ) solar cells. In this work, we study Plasma-Enhanced Chemical Vapor Deposition p-type hydrogenated nanocrystalline silicon oxide, (p)nc-SiO<sub>x</sub>:H, combined with (p)nc...
journal article 2021
document
Yang, G. (author), Van de Loo, Bas (author), Stodolny, Maciej (author), Limodio, G. (author), Melskens, Jimmy (author), Isabella, O. (author), Weeber, A.W. (author), Zeman, M. (author), Kessels, W. M.M. (author)
Hydrogenation of polycrystalline silicon (poly-Si) passivating contacts is crucial for maximizing their passivation performance. This work presents the application of Al2O3 prepared by atomic layer deposition as a hydrogenating capping layer. Several important questions related to this application of Al2O3 are addressed by comparing results...
journal article 2021
document
Ortiz Lizcano, J.C. (author), Procel Moya, P.A. (author), Calcabrini, A. (author), Yang, G. (author), Ingenito, Andrea (author), Santbergen, R. (author), Zeman, M. (author), Isabella, O. (author)
Building Integrated Photovoltaic systems can produce a significant portion of the energy demand of urban areas. Despite their potential, they remain a niche technology that architects and project engineers still find esthetically limited. The dark blue or black color of standard photovoltaic panels is considered inappropriate for restoration...
journal article 2021
document
Zhou, Y. (author), Verkou, M.H. (author), Zeman, M. (author), Ziar, H. (author), Isabella, O. (author)
Photovoltaic (PV) technology is the most promising renewable energy source to be integrated on urban building surfaces. Modeling and simulating urban PV systems pose more challenges than the conventional ones installed in open field due to rich urban morphology. Herein, a comprehensive workflow to estimate urban solar PV potential is...
journal article 2021
document
Zhao, Y. (author), Mazzarella, L. (author), Procel Moya, P.A. (author), Han, C. (author), Tichelaar, F.D. (author), Yang, G. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Low parasitic absorption and high conductivity enable (n)-type hydrogenated nanocrystalline silicon [(n)nc-Si:H], eventually alloyed with oxygen [(n)nc-SiO<sub>x</sub>:H], to be deployed as window layer in high-efficiency silicon heterojunction (SHJ) solar cells. Besides the appropriate opto-electrical properties of these nanocrystalline...
journal article 2021
Searched for: +
(21 - 40 of 154)

Pages