Near-infrared light-driven asymmetric photolytic reduction of ketone using inorganic-enzyme hybrid biocatalyst

Effective photolytic regeneration of the NAD(P)H cofactor in enzymatic reductions is an important and elusive goal in biocatalysis. It can, in principle, be achieved using a near-infrared light (NIR) driven artificial photosynthesis system employing H₂O as the sacrificial reductant. To this end we utilized TiO₂/reduced...

Size effect on compressive strength of foamed concrete: Experimental and numerical studies

This study investigates the size effect on the compressive strength of foamed concrete at the mesoscale level combining X-ray computed tomography (X-CT) and a discrete lattice model. Image segmentation techniques and X-CT were employed to obtain virtual specimens comprising hydrated cement paste and air voids. The lineal-path function and...

Double-sided heat dissipation numerical modeling of an embedded half-bridge power module with multiple chips

Thermal management has always played a significant role in power module design. Double-sided heat dissipation is more efficient at transferring heat than the traditional package. Although there are several thermal modeling approaches to power modules, the application of the numerical models, which are computationally fast and accurate, has...

基于分段步进式弹塑性格构模型的混凝土破坏过程细观模拟

The classically lattice model assumes the local elements behave elastic brittle, neglecting the ductility of the mortar matrix. This leads to the simulated load⁃displacement response more brittle than the realistic. To solve the aforementioned issue, a piece⁃wise approach was introduced to describe the elastic⁃plastic constitutive relation of...

Analysis of Metallization Effects of Pressure-Assisted Cu Nanoparticle Sintering on DBC by Experiment and Nanoscale Simulation

Substrate metallization is a crucial factor affecting the mechanical properties of sintered nanoparticles in microelectronics applications, as it is essential for ensuring good adhesion between the substrate and the sintered material. In this study, we investigated the influence of metallization on pressure-assisted nanocopper sintering and...

Electron-Irradiation-Induced Degradation of Transfer Characteristics in Super-Junction VDMOSFET

High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...

Joint energy consumption optimization method for wing-diesel engine-powered hybrid ships towards a more energy-efficient shipping

Wing-diesel engine-powered hybrid ships can effectively reduce fuel consumption and CO₂ emissions by using wind energy as the auxiliary driving power. The energy optimization management of the hybrid system can further improve the ship's energy efficiency. To achieve this purpose, it is significant to establish an effective energy...

Subwavelength spinning of particles in vector cosine-Gaussian field with radial polarization

A new type of radially polarized (RP) cosine-Gaussian (CG) field is proposed. Through the analytical model, it is found that such RP CG beam exhibits completely different focusing properties from the reported RP plane waves. More importantly, a stable three-dimensional trap of Rayleigh particle accompanied by a subwavelength spin motion can...

Astronomical forcing of meter-scale organic-rich mudstone–limestone cyclicity in the Eocene Dongying sag, China: Implications for shale reservoir exploration

The middle Eocene Dongying sag in the Bohai Bay Basin of China has an estimated shale oil resource of approximately 1.1 billion t (8.06 billion bbl); flows of shale oil have been produced in the succession from tens of wells, where the daily production of a single well generally varies between 10 and 100 t (73.3–733 bbl). Therein, the mudrock...

High-Voltage and High-Current IGBT Press-pack Module for Power Grid

On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid...

Structural analysis and parametric study ballasted track in sandy regions

The sand intrusion in railway tracks in sandy regions can significantly change the mechanical behaviour of tracks and thus threaten the safety of train operation. This paper presents substantial field tests on both sandy and clean railway tracks to study the effect of sand intrusion on the longitudinal resistance of ballast bed and the...

Case Study of the Largest Concrete Earth Pressure Balance Pipe-Jacking Project in the World

Pipe jacking has been the dominant trenchless technology for constructing small (\2 m) to medium-diameter (\4 m) tunnels. Uncertainties and construction difficulties increase significantly when the diameter of the tunnel exceeds 4 m. This paper presents a case study of the largest concrete pipe-jacking tunnel project in the world, the...

Fabrication of a Nanosize Hematite Pigment via Waste Ferrous Sulfate Recycling Using Sulfur Reduction

Nanometer-sized hematite was prepared via a two-step process. In the first step, FeSO₄·7H₂O was oxidized to Fe₂(SO₄)₃ by oxygen in an acidic solution. In the second step, the Fe₂(SO₄)₃ was reduced to nanosize hematite with sulfur vapor at 550 °C. The...

Development of an adaptive CTM–RPIM method for modeling large deformation problems in geotechnical engineering

In this paper, a meshfree method called adaptive CTM–RPIM is developed to model geotechnical problems with large deformation. The developed adaptive CTM–RPIM is a combination of the Cartesian transformation method (CTM), the radial point interpolation method (RPIM) and the alpha shape method. To reduce the requirement for meshes, the CTM is...

Sbs modified bitumen with organic layered double hydroxides: Compatibility and aging effects on rheological properties

SBS-modified bitumen (SMB) is susceptible to aging, which seriously influences its service performance and life. In order to strengthen the anti-aging ability of SMB, triethoxyvinylsilane was designed to organically modify layered double hydroxides (LDHs) and was applied to modify SMB. The dispersibility and storage stability of LDHs in SMB...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

Degradation behaviors and in-vivo biocompatibility of a rare earth- and aluminum-free magnesium-based stent

Biodegradable stents can provide scaffolding and anti-restenosis benefits in the short term and then gradually disappear over time to free the vessel, among which the Mg-based biodegradable metal stents have been prosperously developed. In the present study, a Mg-8.5Li (wt.%) alloy (RE- and Al-free) with high ductility (> 40%) was...

Design and characterization of zero magnetic field chambers for high efficiency neutron polarization transport

Several methods of polarized neutron scattering call for a zero magnetic field (ZF) region to reduce magnetic field integral aberrations while preserving the neutron polarization. Though the design for large angle neutron scattering has been presented in various places, the design characterization and tuning has not been discussed before. In...