Searched for: +
(1 - 20 of 52)

Pages

document
Chen, B. (author), Perumal, Priyadharshini (author), Aghabeyk, F. (author), Adediran, Adeolu (author), Illikainen, Mirja (author), Ye, G. (author)
The pursuit of low-carbon binders as alternatives to Portland cement has sparked interest in developing alkali-activated materials (AAM).<sup>1</sup> Using municipal solid waste incineration (MSWI) bottom ash as precursor for AAM has attracted increasing attention as it offers a sustainable, resource-efficient solution to mitigate the...
review 2024
document
Chen, B. (author), Perumal, Priyadharshini (author), Illikainen, Mirja (author), Ye, G. (author)
In recent years, the widespread application of waste incineration technology has led to an increased generation of municipal solid waste incineration (MSWI) bottom ash. There is growing interest in the use of MSWI bottom ash as a mineral resource to produce construction materials. The utilization potential of MSWI bottom ash is determined by...
review 2023
document
Li, Z. (author), Chen, Y. (author), Provis, John L. (author), Cizer, Özlem (author), Ye, G. (author)
This paper provides a critical review on autogenous shrinkage of alkali-activated slag (AAS). It is reported that AAS paste, mortar, and concrete generally show larger autogenous shrinkage than Portland cement (PC) counterparts. Self-desiccation is the main driving force of the autogenous shrinkage of hardened AAS, but other mechanisms also...
review 2023
document
Khaliq, J. (author), Li, C. (author), Chen, K. (author), Shi, B. (author), Ye, H. (author), Grande, A.M. (author), Yan, H. (author), Reece, M.J. (author)
The effect of substitution and oxidation-reduction on the thermal conductivity of perovskite-like layered structure (PLS) ceramics was investigated in relation to mass contrast and non-stoichiometry. Sr (acceptor) was substituted on the A site, while Ta (donor) was substituted on the B site of La2Ti2O7. Substitution in PLS materials creates...
journal article 2015
document
Chen, X.P. (author), Jiang, J.K. (author), Liang, Q.H. (author), Yang, N. (author), Ye, H.Y. (author), Cai, M. (author), Shen, L. (author), Yang, D.G. (author), Ren, T.L. (author)
We present a first-principles density functional theory study focused on how the chemical and electronic properties of polyaniline are adjusted by introducing suitable substituents on a polymer backbone. Analyses of the obtained energy barriers, reaction energies and minimum energy paths indicate that the chemical reactivity of the polyaniline...
journal article 2015
document
Chen, Xianping (author), Ye, H. (author), Fan, Xuejun (author), Ren, Tianling (author), Zhang, Kouchi (author)
Heat pipes (HPs) have received considerable attention in recent decades, especially in the field of cooling electronics, which requires the removal of added heat from an area of limited volume to the environment. Small HPs are widely used in electronic applications, which are normally limited by the compact structure and dimensions of the...
journal article 2016
document
Chen, Shiyang (author), van de Ven, F.H.M. (author), Zevenbergen, C. (author), Verbeeck, Simon (author), Ye, Qinghua (author), Zhang, Weijun (author), Wei, Liang (author)
Integrating sustainable urban water management into the urban planning process is essential for developing water-resilient cities. To this end, the central government of the People’s Republic of China initiated the “Sponge City” programme. However, challenges and gaps exist in current urban planning practice. The operationalizable planning...
journal article 2021
document
Chen, Jing (author), Liu, X. (author), Zeng, Xiao Liang (author), Ye, Huai Yu (author), Zhang, Kouchi (author)
Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...
journal article 2022
document
Qiu, Xiujiao (author), Chen, J. (author), Ye, G. (author), De Schutter, Geert (author)
A 3D reactive transport model at microscale is proposed for simulating the chemical reaction process of alkali silica reaction (ASR) thermodynamically and kinetically including the dissolution of reactive silica, the nucleation and growth of ASR products and the dissolution of calcium hydroxide (CH) and calcium silicate hydrate (C-S-H) as a...
journal article 2022
document
Qiu, Xiujiao (author), Chen, J. (author), Deprez, Maxim (author), Cnudde, Veerle (author), Ye, G. (author), De Schutter, Geert (author)
The microstructure of alkali-reactive aggregates, especially the spatial distribution of the pore and reactive silica phase, plays a significant role in the process of the alkali silica reaction (ASR) in concrete, as it determines not only the reaction front of ASR but also the localization of the produced expansive product from where the...
journal article 2021
document
Qiu, Xiujiao (author), Chen, J. (author), Ye, G. (author), De Schutter, Geert (author)
Prediction of alkali silica reaction is still difficult due to the lack of a comprehensive understanding of its chemical fundamentals. In-site experimentally revealing the fundamentals is not realistic as ASR shows over several years or even decades and is affected by many factors. In this paper, by utilizing a 3D reactive-transport...
journal article 2022
document
Tong, Liang-yu (author), Xiong, Qing Xiang (author), Zhang, Zhidong (author), Chen, Xiangsheng (author), Ye, G. (author), Liu, Qing feng (author)
This paper develops a novel lattice diffusive model to quantitatively study the chloride diffusion coefficient in unsaturated cementitious materials, in which the pore voxels are redistributed to make a better representation of a real microstructure of hardened cement paste. Considering the hierarchical microstructure and different drying...
journal article 2023
document
Chen, B. (author), Ye, G. (author)
This research explored the microstructure formation and strength development of blended cement pastes prepared with municipal solid waste incineration (MSWI) bottom ash. A new sample preparation approach involving water treatment of MSWI bottom ash was developed to prevent sample cracking caused by the presence of metallic aluminum (Al) in...
journal article 2024
document
Qiu, Xiujiao (author), Chang, Z. (author), Chen, J. (author), Schlangen, E. (author), Ye, G. (author), Schutter, Geert De (author)
In our former paper, based on a published 3D reactive transport model at microscale with the capability of simulating the chemical reactions involved in ASR, the location of expansive ASR gel related to the reactivity of aggregate, temperature, aggregate porosity and silica content in aggregate, is clarified. Based on the simulation results,...
journal article 2023
document
Li, Z. (author), Lu, T. (author), Chen, Y. (author), Wu, B. (author), Ye, G. (author)
This study aims to predict the autogenous shrinkage of alkali-activated concrete (AAC) based on slag and fly ash. A variety of analytical and numerical models are available for the prediction of autogenous shrinkage of ordinary Portland cement (OPC) concrete, but these models are found to show dramatic discrepancies when applied for AAC due...
journal article 2021
document
Li, Z. (author), Liang, X. (author), Chen, Y. (author), Ye, G. (author)
The high autogenous shrinkage of alkali-activated materials made from slag and fly ash is recognised as a major drawback with regard to the use as construction materials. In this study, metakaolin was introduced into the alkali-activated slag-fly ash (AASF) paste to mitigate the autogenous shrinkage. The shrinkage mitigation mechanism of...
journal article 2021
document
Li, Z. (author), Beltran, Irving Alfredo Flores (author), Chen, Y. (author), Šavija, B. (author), Ye, G. (author)
In this study, glass wool waste was utilized by means of alkali-activation with blast furnace slag. Reaction kinetics, workability, mechanical properties and autogenous shrinkage of alkali-activated slag and glass wool were comprehensively studied. Results indicated an optimal modulus (SiO<sub>2</sub>/Na<sub>2</sub>O) of the activator related...
journal article 2021
document
Chen, J. (author), Martin, Pablo (author), Xu, Z. (author), Manzano, Hegoi (author), Dolado, Jorge S. (author), Ye, G. (author)
Portland cement is the most produced material in the world. The hydration process of cement consists of a group of complex chemical reactions. In order to investigate the mechanism of cement hydration, it is vital to study the hydration of each phase separately. An integrated model is proposed in this paper to simulate the dissolution of...
journal article 2021
document
Huang, Xinxing (author), Li, Yifan (author), Tian, Zhan (author), Ye, Qinghua (author), Ke, Q. (author), Fan, Dongli (author), Mao, Ganquan (author), Chen, Aifang (author), Liu, Junguo (author)
Efficient and accurate streamflow predictions are important for urban water management. Data-driven models, especially neural network (NN) models can predict streamflow fast, while the results are uncertain in some complex river systems. Physically based models can reveal the underlying physics, but it is relatively slow and computationally...
journal article 2021
document
Chen, B. (author), Chen, J. (author), França de Mendonça Filho, F. (author), Sun, Yubo (author), van Zijl, Marc Brito (author), Copuroglu, Oguzhan (author), Ye, G. (author)
Municipal solid waste incineration (MSWI) bottom ash, due to its high mineral content, presents great potential as supplementary cementitious material (SCM). Weathering, also known as aging, is a treatment process commonly employed in waste management to minimize the risk of heavy metal leaching from MSWI bottom ash. Using weathered MSWI...
journal article 2024
Searched for: +
(1 - 20 of 52)

Pages