Searched for: +
(1 - 20 of 51)

Pages

document
Zhang, P. (author), He, C. (author), Shen, C. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
Wheel-rail high-frequency interaction is closely related to the formation of railway short-wave defects. Finite element (FE) method has been widely used to simulate wheel-rail dynamic systems, but its validity in modelling high-frequency interaction has not been fully demonstrated in three dimensions (3D). This work aims at comprehensively...
journal article 2024
document
Wang, J. (author), Li, Runlong (author), Zhang, Xinqi (author), He, Yuan (author)
As one of the crucial sensors for environment sensing, frequency modulated continuous wave (FMCW) radars are widely used in modern vehicles for driving assistance/autonomous driving. However, the limited frequency bandwidth and the increasing number of equipped radar sensors would inevitably cause mutual interference, degrading target...
journal article 2024
document
Yang, X. (author), Chen, Yi (author), Liu, Tao (author), Zhang, Lu (author), Wang, Hui (author), Chen, Mengli (author), He, Qiang (author), Liu, G. (author), Ju, Feng (author)
Constructed wetlands (CWs) have been proven to effectively immobilize plastic particles. However, little is known about the differences in the impact of varying sized plastic particles on nitrous oxide (N<sub>2</sub>O) release, as well as the intervention mechanisms in CWs. Here, we built a lab-scale wetland model and introduced plastic...
journal article 2024
document
He, C. (author), Yang, Z. (author), Zhang, P. (author), Li, S. (author), Naeimi, M. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
Polygonal wear is a type of damage commonly observed on the railway wheel tread. It induces wheel-rail impacts and consequent train/track components failure. This study presents a finite element (FE) thermomechanical wheel-rail contact model, which is able to cope with the three possible generation and development mechanisms of polygonal wear...
journal article 2024
document
Yun, Minghui (author), Yang, Daoguo (author), Cai, Miao (author), Yan, Haidong (author), Yu, Jiabing (author), Liu, Mengyuan (author), He, Siliang (author), Zhang, Kouchi (author)
Metal-oxide-semiconductor field-effect transistors (MOSFETs) undergo fatigue degradation under high thermal and electrical stresses. This process results in changes in their parasitic parameters, which can be detected using frequency domain reflectometry (FDR). Frequency domain impedance analysis is employed to characterize the various...
journal article 2024
document
Li, Meng (author), Shen, Yanzhe (author), Ye, Guixin (author), He, Jialing (author), Zheng, Xin (author), Zhang, Zijian (author), Zhu, Liehuang (author), Conti, M. (author)
Digital forensics is crucial to fight crimes around the world. Decentralized Digital Forensics (DDF) promotes it to another level by channeling the power of blockchain into digital investigations. In this work, we focus on the privacy and security of DDF. Our motivations arise from (1) how to track an anonymous- and-malicious data user who...
journal article 2024
document
Zhang, Shizhe (author), He, S. (author), Ghiassi, Bahman (author), van Breugel, K. (author), Ye, G. (author)
This paper presents an experimental study on the interface bonding properties of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash (AASF) pastes. Three interface bonding properties (i.e., the chemical bonding energy Gd, the initial frictional bond strength τ0, and slip-hardening behavior) were determined using single-fiber pullout...
journal article 2023
document
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, X. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)
In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl<sub>2</sub> and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...
journal article 2023
document
Qu, Yiting (author), He, Xinlei (author), Pierson, Shannon (author), Backes, Michael (author), Zhang, Y. (author), Zannettou, S. (author)
The dissemination of hateful memes online has adverse effects on social media platforms and the real world. Detecting hateful memes is challenging, one of the reasons being the evolutionary nature of memes; new hateful memes can emerge by fusing hateful connotations with other cultural ideas or symbols. In this paper, we propose a framework that...
conference paper 2023
document
Ji, X. (author), van Zeijl, H.W. (author), Jiao, Weiping (author), He, S. (author), Du, L. (author), Zhang, Kouchi (author)
The trend to 3D and heterogeneous integration enable driving multi-functional blocks in one package. Flip-chip integration is currently playing an important role and is based on solder joints. To overcome the limitations of solder joints, all-copper interconnects have been investigated to meet electrical, thermal, and reliability demands in...
conference paper 2023
document
Liang, M. (author), Zhang, Y. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)
This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano...
journal article 2023
document
Chen, Yangkun (author), Yu, Chenghui (author), Zhu, Hengman (author), Liu, Shuai (author), Zhang, Yibing (author), Suarez, Joseph (author), Zhao, Liang (author), He, J. (author), Chen, Jiaxin (author)
We present the results of the second Neural MMO challenge, hosted at IJCAI 2022, which received 1600+ submissions. This competition targets robustness and generalization in multi-agent systems: participants train teams of agents to complete a multi-task objective against opponents not seen during training. We summarize the competition design...
journal article 2023
document
Ji, X. (author), Du, L. (author), He, S. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author)
Copper nanoparticles (CuNPs) sintering for flip-chip interconnects is a promising solution for 3D and heterogeneous integration to overcome the limitation of solder materials. To this end, we perform the photolithographic stencil printing method to pattern CuNPs, and the form of flip-chip interconnects is completed after CuNPs sintering...
journal article 2023
document
Liang, M. (author), He, S. (author), Gan, Yidong (author), Zhang, Hongzhi (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)
This paper employs computer vision techniques to predict the micromechanical properties (i.e., elastic modulus and hardness) of cement paste based on an input of Backscattered Electron (BSE) images. A dataset comprising 40,000 nanoindentation tests and 40,000 BSE micrographs was built by express nanoindentation test and Scanning Electron...
journal article 2023
document
Liang, M. (author), Chang, Z. (author), Zhang, Y. (author), Cheng, H. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)
This study aims to experimentally investigate the autogenous deformation and the stress evolution in restrained high-volume ground granulated blast furnace slag (GGBFS) concrete. The Temperature Stress Testing Machine (TSTM) and Autogenous Deformation Testing Machine (ADTM) were used to study the macro-scale autogenous deformation and stress...
journal article 2023
document
Zhu, Chunyan (author), Zhang, Yuning (author), van Maren, D.S. (author), Xie, Weiming (author), Guo, Leicheng (author), Wang, Xianye (author), He, Qing (author)
The sediment load in the Yangtze River downstream of the Three Gorges Dam (TGD) has substantially declined in recent decades. The decrease is more profound below the TGD, e.g., a 97% decrease at Yichang, compared with that at the delta apex, 1200 km downstream, e.g., a 75% decrease, implying along-river sediment recovery. Two large river...
journal article 2023
document
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, M. (author), Zhang, Yamei (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)
Limestone-calcined clay-cement (LC3), as one of the most promising sustainable cements, has been under development over the past decade. However, many uncertainties remain regarding its rheological behaviors, such as the metakaolin content of calcined clay. This study aims to investigate the effect of increasing the content of fine-grained...
journal article 2023
document
He, Daojing (author), Du, Runmeng (author), Zhu, Shanshan (author), Zhang, Min (author), Liang, K. (author), Chan, Sammy (author)
Data island effectively blocks the practical application of machine learning. To meet this challenge, a new framework known as federated learning was created. It allows model training on a large amount of scattered data owned by different data providers. This article presents a parallel solution for computing logistic regression based on...
journal article 2022
document
Hou, L. G. (author), Yu, H. (author), Wang, Y. W. (author), You, L. (author), He, Z. B. (author), Wu, C. M. (author), Eskin, D. G. (author), Katgerman, L. (author), Zhuang, L. Z. (author), Zhang, J. S. (author)
The retrogression and re-aging (RRA) processes, aimed mainly at tailoring intergranular precipitates, could significantly improve the corrosion resistance (i.e., stress corrosion cracking resistance) without considerably decreasing the strength, which signifies that an efficient control of the size, distribution and evolution of intergranular...
journal article 2022
document
Liang, Peijie (author), Pan, Zhiliang (author), Tang, Liang (author), Zhang, Kouchi (author), Yang, Daoguo (author), He, Siliang (author), Yan, Haidong (author)
Based on molecular dynamics (MD), in this study, a model was established to simulate the initial coating morphology of silver paste by using a random algorithm, and the effects of different sizes of particles on sintering porosity were also analyzed. The MD result reveals that compared with the sintering process using large-scale silver...
journal article 2022
Searched for: +
(1 - 20 of 51)

Pages