Searched for: +
(1 - 20 of 43)

Pages

document
Wu, Y. (author), Qin, Z. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
With the great emphasis from the international standard-setting community on the so-called supra-harmonics emissions (2-150 kHz), there are increasing research efforts in this noise level identification, measurement, standard setting and mitigation. The periodic variable switching frequency PWM method, which is known as VSFPWM, can reshape the...
conference paper 2023
document
Yu, G. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper introduces variable-frequency zero voltage switching (ZVS) modulation strategy for the four-switch buck+boost converter with one operating pattern for the inductor current, i.e., three-segment inductor current modulation control. The proposed modulation scheme guarantees a smooth transition from step-up to step-down or from step-down...
conference paper 2023
document
Lyu, D. (author), Straathof, C.A. (author), Soeiro, Thiago B. (author), Qin, Z. (author), Bauer, P. (author)
A variable switching frequency modulation for the Dual Active Bridge (DAB) converter is proposed in this paper. With this variable switching frequency modulation, the DAB converter can be operated in the ZVS-beneficial operational modes without the necessity to transition to others, thus a larger ZVS range for the DAB converter can be...
conference paper 2023
document
Wu, Y. (author), Qin, Z. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
The sinusoidal Triangular-Current-Mode (S-TCM) method has been proposed in the AC/DC power-factor-correction (PFC) converter to achieve the zero-voltage-switching (ZVS) which can lead to both, high efficiency operation and a high power density design. Nevertheless, the necessary wide range variation of the sinusoidal switching frequency...
conference paper 2023
document
Yu, G. (author), Ye, P. (author), Grazian, F. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
The pursuit of battery charging technology for electric vehicle (EV) has led to extensive research on the inductive-based wireless power transfer (WPT) systems. In this paper, the compensation component (including coils) stresses will be studied in two commonly adopted compensation topologies, namely S-S and LCC-S compensations. Due to the peak...
conference paper 2023
document
Ganeshpure, D.A. (author), Soundararajan, Ajeeth Phrassanna (author), Soeiro, Thiago B. (author), Ghaffarian Niasar, M. (author), Vaessen, P.T.M. (author), Bauer, P. (author)
This article compares the pulse current capability of various Semiconductor (SM) device technologies for Modular Multilevel Converter (MMC)-based High Voltage (HV) Arbitrary Waveform Generator (AWG) for dielectric testing of grid assets to find the most suitable SM device technology which can perform well in generating lightning impulse that...
conference paper 2022
document
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
When considering EV wireless charging that uses inductive power transfer with magnetic resonance, the coils’ current distortion must be minimized to guarantee compliance with the electromagnetic compatibility limits on the radiated magnetic field set by the relevant industrial standards. This paper analyzes the current distortion caused by...
conference paper 2022
document
Sun, Jian (author), Wu, Y. (author), Soeiro, Thiago B. (author), Qin, Z. (author), Bauer, P. (author)
An efficient, compact and lightweight three-phase AC-DC power factor correction (PFC) converter becomes a necessity for electric vehicles (EVs) On-board chargers (OBCs) in conventional grid-to-vehicle (G2V) and vehicle-to-grid (V2G) charging methods. The commercially available OBCs have very limited power density despite the moderate efficiency...
conference paper 2022
document
Yu, G. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
This paper presents the semiconductor losses analytical equations in closed form for two-level voltage source converter, three-level neutral point clamped (NPC) and three-level T-Type PFC topologies in high power applications. The reverse parallel current conduction between the SiC MOSFETs channel and body diode is considered. A circuit...
conference paper 2022
document
Grazian, F. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
Nowadays, inductive power transfer (IPT) with magnetic resonance is the most used method for high-power wireless battery charging applications. Once the topology of the compensation network and the operating frequency are selected, there are infinite combinations of the circuit equivalent inductance and compensation capacitance values resonating...
conference paper 2022
document
Grazian, F. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper investigates the interoperability of the proposed voltage/current doubler (V/I-D) converter used for wireless charging of electric vehicles (EVs), which achieves high efficiency when charging both 400V and 800V batteries at the same power. Nominally, the V/I-D converter employs bipolar pads (BPP) at both the primary and the secondary...
conference paper 2022
document
Lan, Dun (author), Wu, Y. (author), Soeiro, Thiago Batista (author), Granello, P. (author), Qin, Z. (author), Bauer, P. (author)
This paper presents the study of a 100kW electric vehicle (EV) fast charger based on a 12-pulse rectifier cascaded with two buck-type DC-DC converters. The proposed circuit operates with a triangular current shaping method which considerably improves the current harmonics performance of the system. The studied circuit is particularly suited...
conference paper 2022
document
Qiang, Rui (author), Wu, Y. (author), Soeiro, Thiago Batista (author), Granello, P. (author), Qin, Z. (author), Bauer, P. (author)
This paper proposes a solution to the circuit topology of heavy-duty electric vehicle (HDEV) chargers. In light of the original hybrid rectifier, a new unidirectional Input-Parallel-Output-Series (IPOS) three-phase hybrid rectifier is proposed and analyzed. The IPOS topology is advantageous at ultra-high power rating to interface the next...
conference paper 2022
document
Stecca, M. (author), Vermeer, W.W.M. (author), Soeiro, Thiago B. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author), Palensky, P. (author)
This paper discusses the design and optimization of electric vehicles’ fast-charging stations with on-site photovoltaic energy production and a battery energy storage system. Three scenarios, varying the number of chargers, distance from the main grid, and on-site photovoltaic generation potential, are investigated. Such scenarios are...
conference paper 2022
document
Ganeshpure, D.A. (author), Soeiro, Thiago B. (author), Ghaffarian Niasar, M. (author), Vaessen, P.T.M. (author), Bauer, P. (author)
This paper analyses different design trade-offs for a Modular Multilevel Converter (MMC)-based Arbitrary Wave shape Generator (AWG) used for High Voltage (HV) testing and certification of grid assets such as transformers, switchgear, and cables. Modulation techniques, number of submodules, output voltage levels, arm inductance, and series...
conference paper 2021
document
Stecca, M. (author), Tiftikidis, Panagiotis (author), Soeiro, Thiago B. (author), Bauer, P. (author)
Wide band-gap materials, e.g., Silicon Carbide (SiC), allow the realization of power semiconductor with superior performance with respect to the traditional Si-based counterparts. On the other hand they require more stringent short-circuit or over-current clearing time to safeguard the device lifetime. This paper focuses on the analysis, design...
conference paper 2021
document
Riekerk, C. (author), Grazian, F. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
The increase in popularity of electric vehicles (EVs) and the pursuit of user convenience makes wireless power transfer (WPT) an attractive technology for the charging of batteries. The usage of WPT in e-transportation is not straightforward because the current standardization limits the allowed operating frequency range and magnitude of the...
conference paper 2021
document
Tan, Changyu (author), Stecca, M. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
The parallel connection of a Silicon (Si)-based IGBT and a Silicon Carbide (SiC)-based MOSFET forming a so called hybrid switch (HyS) can be used to exploit the advantageous features of both semiconductor and materials technologies. In this paper, a HyS-based inverter designed for the application of Electric Vehicle (EV) traction is compared to...
conference paper 2021
document
Shi, W. (author), Grazian, F. (author), Bandyopadhyay, S. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper aims to investigate the dynamic charging performance of an 11 kW dynamic inductive power transfer (DIPT) system. First, a multi-objective optimization (MOO) method is proposed to find the Pareto front of the DD charging pad. Then, the optimal design with a 96.82% efficiency is selected as the target design for the DIPT system....
conference paper 2021
document
Yu, G. (author), Ghaffarian Niasar, M. (author), Ganeshpure, D.A. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
SiC MOSFETs have become more and more popular in recent years. Apart from its superior performance, attentions should be paid to its driving method. In this paper, an improved transformer driving circuit is proposed which can provide an almost constant negative turn-off voltage within a wide dutycycle range. Both simulation and experimental...
conference paper 2021
Searched for: +
(1 - 20 of 43)

Pages