Failure characteristics of reinforced concrete circular slabs subsequently subjected to fire exposure and static load: An experimental study

This study investigated the effect of fire on the ultimate load-bearing capacity of reinforced concrete (RC) slabs. The structural response of RC circular specimens subjected to static load conditions after exposure to a hydrocarbon fire on one side of the specimen was examined. Two fire exposure times were considered (60 and 120 min) in...

Material Characterization Approach for Modeling High-Strength Concrete after Cooling from Elevated Temperatures

Advanced numerical modeling of high-strength concrete (fc>60 MPa) structures designed to withstand severe thermal conditions requires detailed and reliable information on the mechanical properties of the material exposed to elevated temperatures. The only uniaxial compressive strength variation with temperature is not enough to satisfy the...

Experimental investigation on the structural response of RC slabs subjected to combined fire and blast

Reinforced concrete (RC) submerged floating tunnels (SFTs) represent a possible solution for crossing wide, deep fjords, and is considered for the E39 highway route along the Norwegian west coast. With regard to SFTs, the specific accidental scenario that is under investigation is the combined action of fire and subsequent internal explosion,...

Non-linear finite element analyses applicable for the design of large reinforced concrete structures

In order to make non-linear finite element analyses applicable during assessments of the ultimate load capacity or the structural reliability of large reinforced concrete structures, there is need for an efficient solution strategy with a low modelling uncertainty. A solution strategy comprises choices regarding force equilibrium, kinematic...

Material model for non-linear finite element analyses of large concrete structures

A fully triaxial material model for concrete was implemented in a commercial finite element code. The only required input parameter was the cylinder compressive strength. The material model was suitable for non-linear finite element analyses of large concrete structures. The importance of including a crack closure algorithm was demonstrated on a...