Searched for: +
(1 - 20 of 256)

Pages

document
Tao, Y. (author), Gao, D.W. (author), Wang, H.Y. (author), Zhang, X. (author), Ghasimi, S.M.D. (author), Ozgun, H. (author), Ersahin, M.E. (author), Zhou, Z.B. (author), Liu, G. (author), Temudo, M.F. (author), Kloek, J. (author), Spanjers, H. (author), De Kreuk, M.K. (author), Van Lier, J.B. (author)
conference paper 2014
document
Liu, Y.L. (author), Ortiz, Marco A. (author), Zhang, D. (author), Bluyssen, P.M. (author)
The airborne transmission of SARS-CoV-2 in educational buildings has raised concerns during the current COVID-19 pandemic. In this study, a portable fog generator system was designed and assembled to visualise the airflow pattern of exhaled droplets in a classroom. The system consists of five components: medium, fog generator, buffer, pump, and...
conference paper 2022
document
Wang, H. (author), Apostolidis, P. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Microwave heating is a promising heating technology for the maintenance, recycling and deicing of pavement structures. Many experimental studies have been conducted to investigate the microwave heating properties of asphalt mixtures in the laboratory. However, very few studies investigated the application of microwave heating on asphalt...
conference paper 2020
document
Apostolidis, P. (author), Wang, H. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Oxidative aging is a complex phenomenon in bitumen and its fundamental understanding is needed to optimize paving materials with long-lasting characteristics. This research reports on a diffuse-reaction model for predicting the oxidation of bituminous binders over time and under different conditions. As known, the oxidation of bitumen is...
conference paper 2020
document
Zhang, Y. (author), Liu, X. (author), Jing, R. (author), Apostolidis, P. (author), Erkens, S. (author), Scarpas, Athanasios (author)
During oxidative aging, oxygen reacts with active molecules present in bitumen producing polar compounds, principally ketones and sulfoxides, and increasing in the portion of asphaltenes. In general, oxidation reactions in bitumen yields to change its generic chemical composition and finally its colloidal structure deteriorating the physico...
conference paper 2020
document
Wang, H. (author), Apostolidis, P. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Fundamental models should be developed and utilized in order to facilitate the chemo-mechanical design of modified binder systems for paving applications but not only. Especially, the fact that the incorporation of new chemical substances used as bio-based modifiers or alternative binders is attracting great interest to replace traditional...
conference paper 2020
document
Apostolidis, P. (author), Liu, X. (author), Zhang, M (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Liu, Hexin (author), Perera, Leibny Paola Garcia (author), Zhang, Xinyi (author), Dauwels, J.H.G. (author), Khong, Andy W.H. (author), Khudanpur, Sanjeev (author), Styles, Suzy J. (author)
We propose two end-to-end neural configurations for language diarization on bilingual code-switching speech. The first, a BLSTM-E2E architecture, includes a set of stacked bidirectional LSTMs to compute embeddings and incorporates the deep clustering loss to enforce grouping of languages belonging to the same class. The second, an XSA-E2E...
conference paper 2021
document
Liu, Qilong (author), Breems, Lucien (author), Zhang, Chenming (author), Bajoria, Shagun (author), Bolatkale, M. (author), Rutten, Robert (author), Radulov, Georgi (author)
In the pursuit of ever larger bandwidths, in recent years GHz-rate continuous-time (CT) oversampled ADCs have been reported in literature that achieve bandwidths of hundreds of MHz and have even exceeded the GHz barrier [1]-[3]. As impressive as these bandwidths are for CT ADCs, the required ADC architectures are complex, are sensitive to...
conference paper 2022
document
Ji, X. (author), van Zeijl, H.W. (author), Romijn, J. (author), van Ginkel, H.J. (author), Liu, X. (author), Zhang, Kouchi (author)
The continuous trend to integrate more multi-functions in a package often involves, Heterogeneous Integration of multi-functional blocks in some kind of 3D stacking. The conventional flip chip for die-on-substrate technology applies solder for integration. However, solder joint integration has the disadvantages of restricting height, reflow...
conference paper 2022
document
Luopan, Yaxin (author), Han, Rui (author), Zhang, Qinglong (author), Liu, Chi Harold (author), Wang, Guoren (author), Chen, Lydia Y. (author)
Deep Neural Networks (DNNs) have been ubiquitously adopted in internet of things and are becoming an integral of our daily life. When tackling the evolving learning tasks in real world, such as classifying different types of objects, DNNs face the challenge to continually retrain themselves according to the tasks on different edge devices....
conference paper 2023
document
Wang, Xinyue (author), Yang, Zhoudong (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)
With the popularization of wide band-gap power modules in offshore wind power systems and water surface photovoltaic power stations, packaging materials face challenges of corrosion by salt, blended with high humidity. Copper-silver (Cu-Ag) composite sintered paste was proposed by researchers as a novel die-attach material for a lower cost...
conference paper 2023
document
Hong, H. (author), Ye, Li (author), Li, Ke (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author), Liu, Zewen (author)
In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by <111> crystal plane etching. The etching rate of the <111> crystal plane is reasonably slow as it is only 1/45 of the <100> etching rate, thus allowing and...
conference paper 2021
document
Liu, Minne (author), Ibrahim, Mesfin S. (author), Wen, Minzhen (author), Li, Sheng (author), Wang, An (author), Zhang, Kouchi (author), Fan, J. (author)
Spectral power distribution (SPD) is the radiation power intensity at different wavelengths, containing the most basic photometric and colorimetric performance of the illuminant, which is able to predict the lifetime of LEDs. This paper proposes an SPD model assisted by machine learning algorithms to detect the early failure of white LEDs. The...
conference paper 2023
document
Ji, Liangzheng (author), Li, Zaihuan (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)
Micro LED displays offer superior performance compared to traditional LCD and OLED displays. However, challenges in transfer technology, such as high throughput and scalability, must be addressed. Among various mass transfer techniques, stamp transfer and laser-assisted transfer are widely used for Micro LED assembly. The laser-assisted transfer...
conference paper 2023
document
Wang, Xinyue (author), Zeng, Zejun (author), Zhang, Jing (author), Zhang, Kouchi (author), Liu, Pan (author)
With the increasing application of wide bandgap materials such as silicon carbide and gallium nitride in power devices, the working temperature of power devices has been pushed further. Therefore, it brings higher requirements for packaging materials. Sintered silver is a widely accepted chip connection material. However, silver suffers from...
conference paper 2022
document
Tan, C. (author), Wang, S. (author), Liu, X. (author), Jiang, Jing (author), Zhang, Kouchi (author), Ye, H. (author)
On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid...
conference paper 2022
document
Li, Shizhen (author), Liu, X. (author), Jiang, Jing (author), Tan, C. (author), Gao, Chenshan (author), Liu, Yang (author), Ye, H. (author), Zhang, Kouchi (author)
Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular...
conference paper 2022
document
Qian, Cheng (author), Hu, D. (author), Liu, Xu (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, J. (author)
Nano-metal materials sintering has received increasing attention in recent years for its promising performance in the wide bandgap semiconductor packaging. In this paper, molecular dynamics (MD) simulation method were applied to simulate the nano-Cu sintering mechanism and the subsequent mechanical behavior. Hybrid sintering, comprising...
conference paper 2023
document
Zhang, Qinglong (author), Han, Rui (author), Liu, Chi Harold (author), Wang, Guoren (author), Chen, Lydia Y. (author)
Vision applications powered by deep neural networks (DNNs) are widely deployed on edge devices and solve the learning tasks of incoming data streams whose class label and input feature continuously evolve, known as domain shift. Despite its prominent presence in real-world edge scenarios, existing benchmarks used by domain adaptation methods...
conference paper 2023
Searched for: +
(1 - 20 of 256)

Pages